John Deere 160 FB460V. Budget fixings!
HTML-код
- Опубликовано: 15 окт 2024
- Carb issues, Steering issues, Belt Issues. we have a loaded full length video at hand. welcome to part 1 of the John Deere lawnmower Video
John Deere 160 with a Kawasaki FB460V
Go check out my Instagram the link is somewhere on the About channel tab!
Email me at coldstart83@gmail.com
Replacement carb!
amzn.to/42AhMir
Thanks for watching ColdStart Garage Degens and Derelicts!
#johndeere #backyardmechanic #ridinglawnmower
I have the same mower. I can’t figure out what the problem is with it. It was leaking where you said that one was too. What was the carb you put on it?? I’d love to just slap a $24 amazon carb on it and carry on haha
amzn.to/42AhMir
This is the carb I used. Worked pretty good for me so far!
Awesome thank ya sir!! Hopefully it’ll work for me as well!! 🍻
My new videos I’m better at putting links in. Sorry you had to ask! 🤘🏻🏁🏁🏁
All good! I wasn’t expecting a response that fast at all so I’m just fine asking
I have a 1987 JD165 which is identical to your 160. I’ve replaced the engine a few years ago. Just tuned it up and it runs very nice. The problem is the deck. It’s a real pain in the ass to install. I keep a snow blade on for winter which is easy to take on and off but the switch to the mower deck is a killer. Especially that weird small bracket on the right side that has a tension spring that is a mother to install. The manual is not helpful either. I appreciated your video. You cracked me up.
🤣ya making mundane tasks humors keeps me fixing on stuff. The tensioner is a finger trap 9000.
ive got 1 of those tractors to its 1987 -88 john deere 160 the fb460v has a very small air gap of .1mm to.16mm if this is out of the range for either valve the engine will flood with gas
Same one took bowl of stuck a bread tie up in jet put bowl back on it fired right up
Usually I’d just clean the carbs. It’s just a toilet bowl for fuel. But for what ever reason I chose Amazon special for this video
Watz up Adam.? Moterbike Mike here. You said is this even worth watching it definitely worth watching you moan and grow lol .thanks dude I got faith in you to get it right. Peace out brother
Thanks mike. It was quite the project. Hated editing this one 🤣
You got to the top of my recommended list.... nice. (Swipes your shoulders)
Hey man, great video. Learned lots about my JD 160 and had a few laughs in the process. So I bought my 160 over a year ago and I have 2-3 issues that I have not been able to figure out. My throttle goes from low idle to full throttle when you push the lever up a little. I've got a couple of videos on my channel that show the problems. And I just figured out that I have no brakes either... 🤦♂
My machine needs steering work……. Still 🤣. I’ll get around to it eventual or push mow
@@ColdStartGarage Have you greased the "wheel knuckles"? My steering was not turning at all until I greased them after sitting out all winter.
I hit a bunch of grease fittings. Lots of slop in the steering. I’ll be dismantling within a couple weeks… hopefully
@@ColdStartGarage Hopefully they are not too far gone....if someone doesn't maintain those they can get pretty worn out.
@@ColdStartGarage Also, I recall you saying something about bearings in the deck on the primary secondary pulley. Mine blew up (no maintenance done on them I suppose by previous owners), the whole pulley was over $300...the bearings $30, I replaced the bearings only and it works like a charm.
Wish you would have shown what it looked like when you put that belt on...
Sorry about that. Sometimes when filming in the driveway and trying to wrench at the same time. Some footages slip through the cracks
@@ColdStartGarage I got it tho. Definitely didn't do whatever you did but it's on 😂
What is the length of belt you’re using for the blade deck? I can’t find one that fits. Thanks so much
You don’t happen to have the original do you? If you do tractor supply had a belt measure tool right In their store. I filmed this in 2022 and o forgot to add the lengths… and I don’t remember.
1/2x88” for the drive belt, 1/2x66” on the deck,
1/2x60” for the deck drive.
Thanks for your info! Much appreciated
Hello, how do the knives turn on in this model?
A switch to the right of the steering wheel.
There's no wrong way!?? But it's true you basically have to just do and hope not to lose anything or break something. You do a good enough job for me. None of that is easy so there's really no wrong way. Because most thing's are made to have to bring it to the dealership anyway.
I just try to struggle through it and get it done. And try and have a good time while I’m at it. Thanks for the view and comment!
It’s a 1986-1988 most likely… I have the same one
Yup it’s 1987! Great machine
You are monetized nicely.... carvana ads on your channel
Wow, i cant believe someone this bad makes videos like this. I feel bad for the people watching this to try and learn something. I couldn't make it past the carburetor without fast fwd 10 times 🤦♂️
🤣I’m monetized as well! 🤘🏻🏁🏁🏁
I’m not a how to channel anyways. But I’m having fun.