Omg who cares it’s his car and I bet if he straches it ,he just go back to the dealer ship and buys another truck so why u guys are so butthurt I bet you you’re car doesn’t look this nice and clean like his so f***k off!!!!
Love your personality and how u explain everything so well and with such Great energy!! New subbie! I’m about to hook-up my Lexus from watching your videos. Thank u!
Looks awesome! I have a few questions, firstly regarding staying on, can you pressure clean your car does the adhesive withstand the pressure? and in the sun does it just come loose? Thirdly can you shut your bonnet normally in a normal motion not so slow and gentle as you did it? And what did you use for the right side where the battery isn't? I imagine very long wires extending back to your battery that may be problematic.
Keye T its not common to find it pre installed, you can buy the halo leds (similar price too) and install inside but you have to, take them off the car, still wire it up, bake to remove it, reinstall a silicon seal and close em back up, risk braking them-opening up since not allheadlights are the same. When i can just tape
Barely visible on daytime for both amber and white light, only good for night time. Use Alpena MAX LED for actual DRL light or got with 5054 LEDs with white tube diffuser
Just installed this on my 2012 Chrysler 200 (only amber not the DRL since car already came with it) I was very lucky that actually the top of the headlights assembly has recessed behind the top line clear lens got perfectly enough room to stick it and because of that the strip looks like installed inside the housing, love it, thanks for the video 👍👍👍
these are actually made for external use , there most definitely is a mode for internal use but its most definitely some work recommended a really good heat gun when attempting it as well, if not the possibility of kracking your headlights is very possible
I believe it's pretty similar to regular led strips except with the individual led connected to the modulator. U only need to cut it from the end side and keep the front. After that u'll need to cover the end since there's wires travelling the whole strips. DONT TAKE THIS FOR GRANTED.
Take the original halogen bulbs out from the indicator and just leave the led. I’m not sure if your car will hyper flash because of that but it would look so much better.
Can you hook that black wire into ground wire to get power. Im thinking about just installing the wires into turn signals and headlight wires. My car is old
Many ppl suggesting bottom of headlights but how would you hide the wire going in to the power supply - like many others would like to know the most important part of how to connect the wires into existing power supply
Hello , thanks for posting the video. Seeing the reviews that the thing is not brighter or dimming off in couple of days/ weeks. Is it worth a buy? Thanks
I Also have a highlander buddy. That's why I specially follow you. You make great videos. Can you please add a video showing how to install these led tripes please
"Actual / Actually" count = 56. (seriously dude. It's annoying as hell) But thanks for the video. I hadn't heard of this and I think it would look great on my Miata.
Anyone answer this? IS there a strip like this that is brighter so they can be seen in the daylight? I think that is what we all want right, not just for night time.
Be careful they look good but the hood did NOT closed properly flushed when you brought it down. Is best to use as I seeing it done on other vehicles installations videos. To the inner shell of hood in order for the hood to be properly flushed & secured to the hook. Remember the wind and the air drag can & will released that hood at high speeds on the highway I have seeing it. Lawyer will do it your way, But Thera are always others watching this your video. “Disclaimer” free advise to YouBers $…
dude you couldve showed them how to splice the wire at the very least Considering most newer Toyotas don't have a DRL fuse... Something as simple as a voltmeter for the turn signal socket would help as well
Here is the link: amzn.to/2GQ94FG If sold out, don't worry it will be in stock in a few days.
Really cool how do I get them in Nigeria?
Can you make a video how to splice the wires correctly?
How to do the wiring connections?
What would cost me on Amazon?.as well think looking like on Pontiac g6 gt 2.door it black on black
Can u just connect the 3 wires to the turn signal housing instead of the battery
I think the length would fit better on the bottom of the headlamp
I work at a body shop and my hair is standing on end with you using your hood as a table/counter.
Money doesn't buy brains
lol
Omg who cares it’s his car and I bet if he straches it ,he just go back to the dealer ship and buys another truck so why u guys are so butthurt I bet you you’re car doesn’t look this nice and clean like his so f***k off!!!!
@Malik Martin .l LLP
So agreed unless the guy planing to change to car paint color lol
Love your personality and how u explain everything so well and with such Great energy!! New subbie! I’m about to hook-up my Lexus from watching your videos. Thank u!
Thank you so much!!
Looks awesome! I have a few questions, firstly regarding staying on, can you pressure clean your car does the adhesive withstand the pressure? and in the sun does it just come loose? Thirdly can you shut your bonnet normally in a normal motion not so slow and gentle as you did it? And what did you use for the right side where the battery isn't? I imagine very long wires extending back to your battery that may be problematic.
I think you might have pulled off a sexier look with the strip at the bottom of the lights. Maybe have two per side? Great share bro.
you BLEW my mind when you said i didn't need to open my headlight up!
im definitely gonna buy this
INDIAN SUV BLOGGER how so? Do you have one?
just open them up lol... or get some aftermarkets,, this is a global vehicle... wide selection
Keye T oof not mine, the halo headlights are $400 and thats the cheapest pair.... plus its not common. So these seem like a good choice. You know?
OverKnight 52 They are but just open the headlight and install them... it's less hassle in the future
Keye T its not common to find it pre installed, you can buy the halo leds (similar price too) and install inside but you have to, take them off the car, still wire it up, bake to remove it, reinstall a silicon seal and close em back up, risk braking them-opening up since not allheadlights are the same. When i can just tape
Barely visible on daytime for both amber and white light, only good for night time. Use Alpena MAX LED for actual DRL light or got with 5054 LEDs with white tube diffuser
The packaging says it can be used on cars, "Sccoter" 😂
been watching you since like 2016, and i still dont know your name Lol
1:54 "Pacific Vehicle"
As opposed to an Atlantic vehicle 😂
YOU GOT TO HEAR WHEN HE SAYS “LITERATURE” ... HE SAYS EVERY SINGLE LETTER IN THERE 😂
Just installed this on my 2012 Chrysler 200 (only amber not the DRL since car already came with it) I was very lucky that actually the top of the headlights assembly has recessed behind the top line clear lens got perfectly enough room to stick it and because of that the strip looks like installed inside the housing, love it, thanks for the video 👍👍👍
The wiring NONE Of any videos I’ve seen shows the actual wiring step by step 😤
Bryant Demby it’s easy
Trueee
I watched so many videos and its impossible to find a right way to connect.
@@jrvargas3096 HOW THEN
The same here.. i was till now not able to find any wiring example, do we need any connectors to connect to the headlight cable.
Since this vid was made awhile ago, how well the led light hold up or longevity of the led light?
I want to see someone put in the extra time and effort into fitting this product inside the headlight to see the look.
I’ll buy it rn and do it
these are actually made for external use , there most definitely is a mode for internal use but its most definitely some work recommended a really good heat gun when attempting it as well,
if not the possibility of kracking your headlights is very possible
Its been 2 years. Do you still have this on the car or did you get paid for this video? Please update
Can you make a video showing how to splice the wires correctly
I believe it's pretty similar to regular led strips except with the individual led connected to the modulator. U only need to cut it from the end side and keep the front. After that u'll need to cover the end since there's wires travelling the whole strips. DONT TAKE THIS FOR GRANTED.
So as Sergio asked, could you do a video showing how to slice the wires correctly? 😂😂
Especially the turn signal where and how to perfectly connect it?
@@dedanieldd That made no sense.
@@starscream42
😅 English is not my first language
""Angle eyes""😂😂its Angel eyes btw lmao
Installation is at 07:12
Never heard anyone describe zip ties as “cute” lolz. Enjoyed the video my man.
Can you make a video of you showing how to install it in the car including how to splice the wires
Not too SHABBY!!! LMAO😭
lol
LMFAOOOOO
Not much of a selection of vocabularies, I thought the video was skipping :-)
Says "actually" 94924 times
He says “not too shabby” 73673 times
Can you connect the positive and negative to the light wires?
Nice commentary. however i was more looking on how you made the connection to the actual headlight power cables. did you use any kind of connector?
Yea I drive a 2017 Chevy Equinox midnight and I wanna make sure I have a step by step of the wiring so I’m not messing anything up
Thanks for your time. Just perches this can't wait to see on my car.
You can also put it inside the headlight casing. But it would entail a lot of work.
Take the original halogen bulbs out from the indicator and just leave the led. I’m not sure if your car will hyper flash because of that but it would look so much better.
"not too shabby"
Natanael Garcia soon as i scrolled through comments he said it😂
@@TreySoSuave haha yeah I was like "dude!" Haha same happened to me!
If I learn something about this video is that these lights are not too shabby Thanks for the video SIR
😂
What's the shabby count at the end of the video? 🙊
Looks good bruv.
Need to add to this on my F150 👌🏼
Can you hook that black wire into ground wire to get power. Im thinking about just installing the wires into turn signals and headlight wires. My car is old
Install it on the bottom gap of the headlight instead. Not the top
Jose Arreguin definitely should be on the bottom with that particular headlight. It would span the entire bottom front of the headlight
Did you used alligator wires for headlight?
Run it through a carwash and let's see will it survive
Nothing can move it, smashed between the hood and the headlight itself
I think the first mistake is actually running your car through an automated car wash.
@@starscream42 I don't see it as a mistake. Most consumers would expect the lights to hold if you're sticking anything on the outside of your car.
Danny Sil I think hes just saying automated car washed suck because they damage the paint. With the exception of touchless washes
“Non evasive”? Invasive...actually 😉
Hi just wondering are there any for the taillight
Omg I wanna get that to my Accord 2018. Or is there a way for me to keep my stock accord turn signal stay on yellow light all the time ?
Did you try parking lights?
Nice video and amazing product, ordered a set and nay look into ordering some for the rear!
Many ppl suggesting bottom of headlights but how would you hide the wire going in to the power supply - like many others would like to know the most important part of how to connect the wires into existing power supply
Shabby shabby🤯
Do it the right way and install them inside the headlights
I agree except these aren’t for that. They are made to go between the hood and the headlight.
I disagree with installing them inside as I've had to replace mine a few times which is a pain
@@rafloolx7944 Yes You understand lol
@@KLEANTRIX Brilliant channel by the way! I'm subscribing 👍
What’s that yellow wire Ur using called and where can I buy it
Nice Highlander
Trust me this guy Explanation is really good I didn’t like the other people video
Hello , thanks for posting the video. Seeing the reviews that the thing is not brighter or dimming off in couple of days/ weeks. Is it worth a buy?
Thanks
Very nice. I ordered a couple of sets for my motorcycle.
I Also have a highlander buddy. That's why I specially follow you. You make great videos. Can you please add a video showing how to install these led tripes please
Can this be installed at the brake and signal light?
Thank you for sharing this video!
When you finished your wiring did you run your acc Power wire independently or together?
Thank you for making this video. I am going to buy these lights!
Thankss bro! It worked well
im going to get this at some point and replace my dead DRL with this on both headlights, there aftermarket ones but the one drl is still working.
If i want to just hide the led strip for any inspection, do I just have to disconnect ground wire?
That would work, but why hide it?
Hi,Everybody,thanks for your orders,if run out of stock,please go back some days later.
"Actual / Actually" count = 56. (seriously dude. It's annoying as hell)
But thanks for the video. I hadn't heard of this and I think it would look great on my Miata.
Actually!!!!!!!!!!!!!
Not too shabby, bad boy
"Not too shabby" x1000
Bro need wiring. Please add link to buy wires.
I installed these and over time when it gets warm they start to flash orange, anybody experienced that?
Upload a night vision video
Best review of these. Thanks
To much wires I hate wires ,good video on the product
Thanks for the info. Ordered for my pearl white Toy Highlander Limited! LOL
Very good!
Thanks
How does it hold up to the elements and car washes? Looks like it will peel off.
Nelson Guzman it won’t because it’s sandwiched between the hood and the headlight. You are fine.
Wish it was longer
Anyone answer this? IS there a strip like this that is brighter so they can be seen in the daylight? I think that is what we all want right, not just for night time.
Pls show us on sccoter..
This is a nice touch for the front. What do you suggest for the rear tail lights to match? Thanks
I'll have to find something else, however the rear is a whole different ball game and not necessarily have to match the front.
Be careful they look good but the hood did NOT closed properly flushed when you brought it down. Is best to use as I seeing it done on other vehicles installations videos. To the inner shell of hood in order for the hood to be properly flushed & secured to the hook. Remember the wind and the air drag can & will released that hood at high speeds on the highway I have seeing it. Lawyer will do it your way, But Thera are always others watching this your video. “Disclaimer” free advise to YouBers $…
Thank you. Can you make a video show how to wire Dual Color LED Headlight for my highlander
do these work with canbus vehicles?
bro do a video on the the feature that makes your brakes lights flash a few times before staying on when you press the brakes lights
Lol I actually made that video before.
KLEANTRIX send me link
best never fail mod for this is...just tap your pedal a couple times with your foot. I do it all the time. Cost? nothing
Not too shabby
Where can I plug the earth if my battery is in the trunk?
I will. Just get a after market
It fit in out side of light
Wow look nice with led lights
Sweet Highlander
Hi! I buy this product. I have a European Rav 4 2020. Can you help me to install de led Strip? I have problems... THX!
My led strip one say R and of other L .wich side go on driver side ? Can help thanks
R for driver side
Great content ! As always! Just curious what camera you use for your videos ?
kit.com/KLEANTRIX/favorite-video-making-gear
01.55 Did he say 'pacific' to your vehicle? Not 'specific' to your vehicle?
this is kind of slick...
You can buy with 3 length choices. 30cm 45cm or 60cm. What is the size of that led strip bro?
ChrisFix little brother is on
Did they last?
dude you couldve showed them how to splice the wire at the very least Considering most newer Toyotas don't have a DRL fuse... Something as simple as a voltmeter for the turn signal socket would help as well
Just bought a pair for my 07 Colorado, how has it kept up 2 years later?
Can you upload a vid showing exactly how to connect and install on an accord
I enjoy your channel videos. What app or program for video editing do you use? Thx, keep doing what you do.
Adobe Premier Pro
Can't you just take out the bulb in the headlights on the front and just use the led strips for turn signals ?
Not really. It will throw an error. You can install a rezistor to mimic voltage usage
Please could you explain how I’m going to install the wires on Kia Optima k5 2012 honestly it’s looks amazing but I don’t know how to connect them
Did you record how to connect the wiring, for this to work?
GREAT VIDEO!!!!
Show how u cut the wires and where u mounted to rest of the wires
What kind of fuse did you use..im having problems with this shutting down my car randomly