Head up Display replace BMW f01

Поделиться
HTML-код
  • Опубликовано: 21 окт 2024
  • To replace a BMW head up display it is necessary to disassemble the dashboard, here you can see how I replaced a head up display on a wonderful BMW 7 Series f01. if the job it is done with a sense of responsibility everything will end to be perfect !
    I do not offer repair services and I do not advertise a service,
    This RUclips channel is for educational and entertainment purposes
    WARNING ! This is NOT a DIY , and I'm not responsible for any damage you may do trying to copy what you see in this Video.
    I've been doing this for over 15 years, that's why some things may seem simple in this videos. I have a vast experience working with BMW MINI and Rolls Royce , abbreviated BMW Group , and that's why you may see things that seem impossible or very difficult to do, done easily !
    I do NOT offer services! This channel is not an advertisement for a shop or something like that, it is for Educational and Entertainment Purposes, Thank You for Understanding !
    If you want you want to support me :
    PayPal : paypal.me/MunteanuO
    Patreon : www.patreon.co...
    The white Grease that I'm using is "Molykote EM-60L"
    Amazon Affiliate, Commissions Earned : if you buy from these links you'll make me rich :))
    Reusable sealant : amzn.to/2JhtNVy
    Main diagnosis HP tablet : amzn.to/372lmcq
    HP rechargeable stylus for my main HP tablet : amzn.to/3NCh1xq
    Multimeters and probes :
    Probes KAIWEETS KET11 : amzn.to/3hoZVnO
    Main multimeter KAIWEETS ST600Y : amzn.to/3M7lUO7
    Second multimeter ZOYI ZT-X 9999 : amzn.to/3pnhNUq
    Old multimeter UNI-T UT33A : amzn.to/3HpqGD1
    Panel Clip Pliers for removing clips and harness :
    amzn.to/32St4nC
    Tesa Highest Quality Heat Proof Engine Compartment Wiring Tape :
    amzn.to/3aoNHbE
    Tesa adhesive wiring cloth tape : amzn.to/3gTycbZ
    VIOFO A129 Pro Duo 4K Dual Dash Cam : amzn.to/3anGDMd
    VIOFO Hardwire Kit for A129 : amzn.to/3x5F0wx
    BMW e46 GM5 Relay : amzn.to/3d2qbTv
    Ultrasonic bath (mine is painted black by me :) ) : amzn.to/3rU3tlj
    Seat Thigh Support Actuator Repair Gear : amzn.to/35TSsXp
    BMW f10 Leather door pull handle : amzn.to/3oLYIZV
    FRM repair tool : amzn.to/3qKgr5o
    DSO5102P USB Storage Oscilloscope 2 Channels 100MHz : amzn.to/3jPVAJd
    3 in 1 Rework Solder Station : amzn.to/2F0BgWC
    Flux Grease RMA223 : amzn.to/356CWcg
    Chemtronics 60-1-5 SODER-WICK : amzn.to/2Z7iRP5
    Chemtronics 80-3-10 Soder-Wick : amzn.to/3319i5i
    Loctite #243 Threadlocker : amzn.to/356voG7
    For filming /editing I'm using :
    DJI OM 5 Gimbal Stabiliser : amzn.to/3Izu1DI
    MY Camera Samsung s22 ultra : amzn.to/3ZlSKBE
    Camera tripod : amzn.to/32SDRey
    Microphone setup : amzn.to/3jS2uTL
    Microphone lavalier : amzn.to/3iiXE1o
    My work station MacBook Pro 13 2017 : amzn.to/3ckBIvx
    !!! Ops it looks like you've reached the bottom !!!

Комментарии • 135

  • @martin.rodgers
    @martin.rodgers 2 года назад +4

    I just get anxiety from watching this. 😬 I did this kind of stuff before, but something happened, and I would probably just hang myself before doing it again. Awesome job btw 👏

  • @andrewpuhl9533
    @andrewpuhl9533 8 месяцев назад +1

    Very commendable job sir! I was looking for a video of how to do this on a 2018 buick/opel regal and have had no luck finding one but you really got this down to a science!

  • @florinlepadatu5648
    @florinlepadatu5648 2 года назад +9

    Awesome job! So much work so much hassle - for sure it was not the first time you take out the dashboard and central console of a f01 :) Respect!

  • @untidymass
    @untidymass 2 года назад +5

    Very well done a total professional at work I would have you working on my car with no worries thank you for your upload

  • @alexanderris6544
    @alexanderris6544 Год назад +1

    You're real professional!!!!!
    Excellent work you did

    • @MOvidiu
      @MOvidiu  Год назад

      Hello ! thanks for your feed back!

  • @scottp9640
    @scottp9640 2 года назад +4

    I enjoy your videos, do you think you might do one on installing the 16 speaker Bang and Ofuslen speaker system into an FO1/FO2 LCI 7 series?

  • @pacowonderboy
    @pacowonderboy 3 месяца назад

    Absolutely stunning, i really like how you clean all the parts that you install before putting them back…
    I`ve watched a few videos of yours and i am stunned on how you explain some of the instalation parts
    Thank you

    • @MOvidiu
      @MOvidiu  3 месяца назад

      Awesome, thank you!

  • @kevinkortenhoeven
    @kevinkortenhoeven Год назад +1

    You're a Interior Crack... Crazy how fast you remove the dashboard. Big Respekt

  • @ahmadarif7219
    @ahmadarif7219 2 месяца назад +1

    Good job Professional 🎉🎉🎉

    • @MOvidiu
      @MOvidiu  2 месяца назад +1

      Thanks! 😃

    • @ahmadarif7219
      @ahmadarif7219 2 месяца назад

      @@MOvidiu bro where can I purchase ista+

  • @lou007
    @lou007 2 года назад +1

    how to fix the armrest cylinder lock...without removing it....the small door latch fall inside the lock...can't be picked too small!

  • @JGV_IX
    @JGV_IX 2 года назад +2

    Ovi! It’s so great seeing you again! Hope all is well and that you have a great 2022!!
    I never knew it was this much work to repair a HUD 😵
    Lots of respect!
    Could you please make a video on disassembly of the old HUD? Would love to see how it works and there aren’t videos like that anywhere.

    • @MOvidiu
      @MOvidiu  2 года назад +1

      ruclips.net/video/b7yOLgnt19c/видео.html&ab_channel=M.Ovidiu

  • @AngelLopez-ys6bt
    @AngelLopez-ys6bt Год назад

    Nice and clean job .. 👏🏻👏🏻 probably you can help me .. I have an F10 with camera issues , doesn’t show any images.. ISTA D show the modules in green but the system doesn’t work .. any ideas .. to start the job ..? Thank you

  • @piotrm_____y9457
    @piotrm_____y9457 2 года назад +4

    Dziękujemy za świetną prezentacje ,dobra robota 👍👍 pozdro Mikołów Poland :-)🇵🇱

  • @МртимерКравт
    @МртимерКравт 4 месяца назад +1

    Awesome job!

  • @mmmmmed95
    @mmmmmed95 2 года назад +3

    Nice and powerful job, thanks for everything you did in the video for the car💘💘

    • @MOvidiu
      @MOvidiu  2 года назад

      Glad you liked it!

  • @krzysztofmazurkiewicz9831
    @krzysztofmazurkiewicz9831 2 года назад +1

    Hi I have 750Li and I have some issue with hud, HUD: stepping motor, height adjustment, faulty, do you know how it is possible to repair it ?

  • @mounirennasri9532
    @mounirennasri9532 Год назад +1

    You the best machaa lah good job 👍🏻

  • @skinnieh
    @skinnieh 2 года назад +1

    I don't have this problem yet, but I can imagine with an F07 the job would be similar? In any case, thanks again for a (stay) awesome video!

    • @MOvidiu
      @MOvidiu  2 года назад +1

      Yes , it is exactly the same !

  • @khyrofilms
    @khyrofilms 2 года назад +1

    technology.... ;) plastics, wires and lots of fun works ;) regards ;)

  • @MuhammadRizk-vj4mv
    @MuhammadRizk-vj4mv 3 месяца назад

    How much does it cost to replace the display-up unit on a 2010 BMW 750 Li including parts? And where you located?

  • @mesutcelik9209
    @mesutcelik9209 9 месяцев назад

    I have a question Bro!
    If I remove my instrument cluster, do I have to disconnect the battery first?
    Greetings from Germany

  • @peeteraavisto2420
    @peeteraavisto2420 2 года назад +1

    Hope I don't have to take apart my F01 dashboard. HUD is still working. But anyway thanks for good instruction video.

  • @MrFryfish
    @MrFryfish Год назад +1

    I fell almost dragged into dismatling the dashboard on my car! Perfect job.
    Honestly hold long it took to make the video?
    And probably, at least 3 times you dismantle that dashboard... prior showing us ;)
    anyway, great job.

    • @MOvidiu
      @MOvidiu  Год назад +2

      I think it tock me 6 or 7 hours because of filming! I didn't remove it 3 time before filming :) I'm not crazy !

  • @mkd456
    @mkd456 2 года назад +1

    Wow ! Amazing skills

  • @Adrian-yz5nr
    @Adrian-yz5nr 2 года назад +4

    Salutare și apreciere pentru toată munca depusă și multele ore de documentare din spate, însă dacă accepți un mic sfat, nu mai sta cu genunchiul/i pe scaun, deoarece riști să întrerupi rezistența de încălzire. Toate cele bune!

    • @MOvidiu
      @MOvidiu  2 года назад +1

      Salut Adrian . da oare-cum ai dreptate dar din pacate nu pot levita sa nu mai mai am nevoie sa ma sprijin pe scaune ( imagineazati ce calumea ar fi sa pot levita.... ) dar de la e60 incoace toate BMW-urile nu mai au clasica incalzire cu fir de nichelina in silicon au plase din fibra de carbon mult mai rezistente ( mai sunt unele care inca mai au fir de nichelina dar doar pe aripioarele laterale ) , Multumesc pentru apreciere !

  • @vasourumashvili4535
    @vasourumashvili4535 9 месяцев назад

    My windshield is broken so is it possible to remove the head up with the removed windshield without disassembling the whole car?

  • @leov2010
    @leov2010 2 года назад +1

    Nice work Ovi!

  • @Alessandrofaria-t9u
    @Alessandrofaria-t9u 11 месяцев назад

    superb work.

    • @MOvidiu
      @MOvidiu  11 месяцев назад

      Thank you! Cheers!

  • @joonastuominen7328
    @joonastuominen7328 10 месяцев назад

    Can you replace HUD by taking windscreen out? Open 2bolts up and 1down remove connectors and pull it up. Seems like a lot easier?

    • @MOvidiu
      @MOvidiu  10 месяцев назад +1

      No, you can't do that !

    • @joonastuominen7328
      @joonastuominen7328 10 месяцев назад

      Ok thank you and great work man im not gonna try this myself. Seems like prolevel job! :)

  • @izeccordova2832
    @izeccordova2832 4 месяца назад

    It’s there a way you could tell me which direction the pigtail goes from the button for the HUD? Long story short I just purchased a 2011 535i and noticed it has everything for HUD, lane assist ext but doesn’t work. Well I pulled the buttons out and there is no pigtail for it nor can I find it under the dash. Trying to see which route to follow without pulling entire dash for 1 pigtail.

  • @florincristian2366
    @florincristian2366 2 года назад

    Well done. I am watching you all time. Thank you for your videos

    • @MOvidiu
      @MOvidiu  2 года назад

      Thanks for watching!

  • @isthkar123
    @isthkar123 2 года назад

    good job buddy love it watching this repair videos keep it up

  • @MrFryfish
    @MrFryfish Год назад

    Could you please tell where did you get those hocks from, that you used for removing the instrument cluster? 2:20

    • @MOvidiu
      @MOvidiu  Год назад +1

      Hello! they are ordinally picks from O-rings removal sets! you can see they are from different sets!

  • @lasis.1849
    @lasis.1849 2 года назад +1

    Amazing!!! Great job and many thanks for sharing it with us!!!! 🙂🙂🙂🙂

    • @MOvidiu
      @MOvidiu  2 года назад

      Thank you! Cheers!

  • @demontero5214
    @demontero5214 2 года назад +1

    I have big headache while watching this videos 😂

  • @milanlovric7882
    @milanlovric7882 5 месяцев назад

    How can i start the HUD Test what you show at the end of the video?

  • @ИванДимитров-х3е
    @ИванДимитров-х3е 2 года назад +3

    Hello! I have watched all your videos and I am very glad that there are people like you who give us so much help! I own a BMW 523i LCI 2008y. I would like to install some good extras - head up display, night vision, distronic. I want to ask you a few questions for help.

  • @MrFlyNikolai
    @MrFlyNikolai Год назад

    Mine has been broken on my F02 for a while now, seems like it’s inevitable with these cars. I’ve had a replacement in my possession for like a year lol, but it looks like too much work just for that
    I have the upgraded digital instrument cluster & infotainment screen, so the HUD wouldn’t work with that anyway
    I have a question however, I notice you don’t have the DVD player in the hidden compartment. Did the car not come with that option? Or you removed it? Because I can’t get it removed without causing the infotainment screen not to work

    • @MOvidiu
      @MOvidiu  Год назад +1

      Hello! if you didn't see it that means the car wasn't equipped with it! You can remove-it , you need to clos the fiber optic and do some work on the LVDS cables I think...you need to check wiring diagrams!

  • @miketheboss5290
    @miketheboss5290 2 года назад +1

    You’re a beast bro

  • @SebastianPopiolekSaambaTRI
    @SebastianPopiolekSaambaTRI 2 года назад

    Great! numer 1 in the net. congratulation ! thanks for your films :)👋

    • @MOvidiu
      @MOvidiu  2 года назад

      Many thanks!

  • @mou_oso33
    @mou_oso33 Год назад

    😮😮😮 amazing 👏 job bro

  • @kacperzalecki969
    @kacperzalecki969 Год назад +1

    Super filmy, dzięki wielkie!! Te wszystkie plastikowe zaczepy łamią się jak są zimne, więc chyba masz w miarę ciepło w warsztacie?👍👍

  • @projectf025
    @projectf025 2 года назад

    Nice tutorial

  • @MrAlpinab7
    @MrAlpinab7 2 года назад +1

    So happy my F02 has just basic options, petrol, side assist, lane assist, softclose. So much less to go wrong.

  • @SK-bx3mp
    @SK-bx3mp 2 года назад

    Your work is brilliant! Where r u based mate? Doubt UK

  • @melvicoreas6137
    @melvicoreas6137 Год назад

    So there’s no sensor on the windshield ?

  • @siliconeheaters1492
    @siliconeheaters1492 2 года назад

    It's real leather on the dashboard or imitation?

  • @Elrey33700
    @Elrey33700 Год назад

    Hello I would like to know please if I change my dashboard (because the leather has swelled) is it necessary to code the car? thank you in advance

    • @MOvidiu
      @MOvidiu  Год назад +1

      Hello! No you don't need to code for replacing the dashboard , you need to code when replace modules/ control units!

    • @Elrey33700
      @Elrey33700 Год назад +2

      @@MOvidiu Thank you very much for your answer. I did not expect those that you repindiez incredible.

  • @MK1SNIP3Zz
    @MK1SNIP3Zz 2 года назад

    Quick question I know you do this all the time but how long should this job take?

  • @arturmd1642
    @arturmd1642 2 года назад

    Ovidiu, i want a retrofit with BMW CarEye dashcam, but i have thermic windshield or something like that on my 2016 F15. There is said in the website of the product that isnt compatible with thermic windshield. Can you tell me why?

  • @martin.rodgers
    @martin.rodgers 2 года назад

    I have a question for you, perhaps you can help me out. I have a BMW 750 f01 from 2010 - import from Japan. The head unit is quite different in the back compared to the unit you have removed in the video. Would it be OK if I sent you a couple of photos? Maybe you have seen this configuration before.
    The Japanese unit has the standard pink & yellow connector, then it has 4 coax black, blue, gray and yellow. Black and blue I believe are radio and GPS, but yellow and grey?
    On top of this there is a small three-pin connector as well, not sure if it's microphone or something else.

    • @MOvidiu
      @MOvidiu  2 года назад

      Hello, you need to study the wiring diagram and you'll find out everything you need to know. for diagram can use istaD

  • @michelloockx9227
    @michelloockx9227 2 года назад +1

    Super bravo, tu es ingénieur chez BMW ?

    • @MOvidiu
      @MOvidiu  2 года назад

      :) No . if you like this video check out the other videos from my channel !

  • @mateosalazar9533
    @mateosalazar9533 Год назад

    Nice, what did you study to know and do that?

    • @MOvidiu
      @MOvidiu  Год назад

      Hello! It is a very long story !

  • @MegredyPhotoStudio
    @MegredyPhotoStudio 8 месяцев назад +1

    The wizard 😄

  • @davntelisha19
    @davntelisha19 2 года назад +1

    Great job German power 🔋 👏 👍

  • @111chicane
    @111chicane 2 года назад

    Jesus Christ! The entire dash had to be removed to replace the HUD?? That's crazy! I would rather not have the HUD. How much do you charge for this kind of job? And so well done?

  • @dumitrudeac4243
    @dumitrudeac4243 7 месяцев назад

    Salut un video cu perdeluța ușa spate montaj nu ai făcut ? Merci

  • @Hancock_nl
    @Hancock_nl 2 года назад

    You made it into 2022! Great. Nice job on a wonderfull car.
    But the coding with Esys goes way to fast to learn what you're doing ;)
    Thanks!

    • @MOvidiu
      @MOvidiu  2 года назад +1

      Why you say that :D, I was suppose to not make it :)) , The coding is done at a normal speed even slower ...:)

  • @JovanKorica1
    @JovanKorica1 2 года назад

    great work, really well done.

    • @MOvidiu
      @MOvidiu  2 года назад

      Nice ! I'm glad you enjoyed ! :)

  • @profiralin3125
    @profiralin3125 2 года назад

    Salut cum ai testat head up display-ul?

  • @BadJooJu
    @BadJooJu 2 года назад +1

    Hello Ovidiu! Thank you for another high-quality video - nice to watch.
    PS Do you happen to know if the BMW E66 has a hard drive (HDD) in the center display?

    • @MOvidiu
      @MOvidiu  2 года назад +1

      Hello ! BMW e66 don't have HDD , the internal storage HDD was implemented from CIC Navi system

    • @BadJooJu
      @BadJooJu 2 года назад

      @@MOvidiu THX!

  • @martynasr08
    @martynasr08 2 года назад

    what if you put everything together and new part is faulty ? :D you dont test it without dashboard?

    • @MOvidiu
      @MOvidiu  2 года назад +2

      Prior installation the part was tested !

  • @florianm.3563
    @florianm.3563 2 года назад +1

    Great videos keep it up!

    • @MOvidiu
      @MOvidiu  2 года назад +1

      Thanks!

    • @florianm.3563
      @florianm.3563 2 года назад

      @@MOvidiu Thank you, I'm learning to thank you :)

  • @fraizer2600
    @fraizer2600 2 года назад

    hi great ! how you launch that test of color at the end ? i have an e63/e64 :)

    • @MOvidiu
      @MOvidiu  2 года назад +1

      Hello , watch this video and you will have the answerer there ruclips.net/video/b7yOLgnt19c/видео.html&ab_channel=M.Ovidiu

  • @benacbenicic6046
    @benacbenicic6046 Год назад

    You are amazing

  • @misteriitaliani
    @misteriitaliani Год назад

    hello dear i have series 7 730xd 2012 n57 i have error wakeup 15...25ee00 code obd....u can help me bye

  • @geopantera2012
    @geopantera2012 Год назад

    Salut, daca mi-ai putea răspunde la o întrebare ar fi super: am și eu un BMW f01 2011 și vreau să-i schimb display.ul cu unul pe android,am găsit unul care era montat pe un F10 2010 și aș vrea să știu dacă sa potrivesc sau nu. Mulțumesc

    • @MOvidiu
      @MOvidiu  Год назад

      Salut, cred ca s-ar potrivi , nu stiu exact deoare-ce nu am montat asa ceva .

  • @gerrykeaveney1657
    @gerrykeaveney1657 2 года назад

    great show as always. what APC do you recommend? and what mix? TIA

    • @MOvidiu
      @MOvidiu  2 года назад

      Hello ! APC ?

    • @eddzonee
      @eddzonee 2 года назад +1

      @@MOvidiu all purpose cleaner

    • @MOvidiu
      @MOvidiu  2 года назад

      @@eddzonee I don't have something specific , I'm using active foam with water ...

  • @codingbmwsofia2818
    @codingbmwsofia2818 2 года назад

    p.s. should be super to told on casual people why you make to chose this CAFD for the coding :) all the best!

    • @MOvidiu
      @MOvidiu  2 года назад +1

      The casual people should not do coding on BMW especially with esys ! :)

    • @codingbmwsofia2818
      @codingbmwsofia2818 2 года назад +1

      @@MOvidiu yes it's a true 😀

  • @tonimemo
    @tonimemo 2 года назад

    Nice Job!!!

  • @sorinspiru8597
    @sorinspiru8597 7 месяцев назад

    Salut.daca îmi poți da o părere .mi-am schimbat spirala de la volan și am deconectat bateria apoi reconectată am băgat un scanner să văd ce erori am și am stat cu el cam mult .acum hud-ul nu se mai aprinde.poate să fie de la baterie? “instrument cluster. Falure of voltage supply. terminal 30B” b7f6a4 am ca erroare

  • @zusurs
    @zusurs 2 года назад +1

    I'm wondering - what the hell are the BMW (and Mercedes, and many other car brand) engineers smoking when creating such a complicated design for the panels. It could be very easy to make the HUD replacable by simply taking out the instrument cluster, but here you need to dissasamble most of the interior just to get to it - it's insane.

    • @MOvidiu
      @MOvidiu  2 года назад +2

      Hello ! it is not insane at all, at the time of designing these vehicles this was the technology, there is no smaller HUD to be able to replace it just removing only the instruments cluster . on the contrary they are very well built. BUT I repeat these vehicles are not built with the idea of ​​being able to be repaired at the edge of the curb on the street, with the necessary tools and knowledge everything is easy to repair / replace

  • @MartyNguyen611
    @MartyNguyen611 9 месяцев назад

    there's no way you have to do all that just because of HUD...I got some serious rattle sounds from the HUD area in my G82 M4 while creeping forward or backwards when the engine is shaking the most (when parking) and it's driving me nuts...and from this vid I won't be able to remove the HUD to check what's making the noise 😭💀

  • @codingbmwsofia2818
    @codingbmwsofia2818 2 года назад

    Hi, nice video again , maybe in da begging you missed to told to disconnect the battery of car first?

    • @MOvidiu
      @MOvidiu  2 года назад +1

      Hello! I didn't miss to say that because I didn't doit ( I'm not disconnecting the battery ) ! This is not a DIY 😀

  • @saynotothegreatreset
    @saynotothegreatreset 2 года назад

    I thought it was a simple job.
    I've got a f31 330d and I was thinking retrofit head up display , I'm not gonna bother to do it

    • @MOvidiu
      @MOvidiu  2 года назад

      Why not do it ! At the end will be a great result , bdy for retrofit HUD you need to change the windscreen also .

  • @alexanderris6544
    @alexanderris6544 Год назад +1

    👏👍

  • @Mel-eo1xe
    @Mel-eo1xe 2 года назад

    very pro like

  • @e55v86
    @e55v86 2 года назад +1

    👍

  • @folken1977ma
    @folken1977ma 2 года назад

    No more click-click ? :) I thought when you pulled the steering wheel

  • @vladbogdan7668
    @vladbogdan7668 2 года назад

    Ceau Ovi , chiar esti primu la care ma uit cu placere la videouri !
    Daca ai pune zilnic ar fi ideal 🤣 dar stiu ca e greu.
    Am 2 intrebari : merita sa pun la un e61 hud retrofit ? Ca timp munca etc
    Si nr. 2 icom + esys + ista sunt luate prin licenta sau dp net si te ai perfectionat in timp.
    Mersi 🙋🏼‍♂️

    • @MOvidiu
      @MOvidiu  2 года назад +1

      Salut ! ma bucur ca iti plac clipurile mele ! Merita si nu merite ... depinde de fiecare in parte , de costurile implicate ...

    • @vladbogdan7668
      @vladbogdan7668 2 года назад

      @@MOvidiu piesele n ar fi o problema , dpdv financiar , mai degraba faptul ca optiune la e61…iar manopera as face o eu :)
      Referitor la a doua intrebare , singur ai reusit sa inveti codariile etc + toolurile folosite :)

  • @denisveste3890
    @denisveste3890 2 года назад +1

    e tatic pe ele

  • @greg8532
    @greg8532 2 года назад +1

    👌
    🖐️🇵🇱🖐️

  • @XhelalImeri-t3m
    @XhelalImeri-t3m Год назад

    👍👍👍👍👍👏👏👏👏👏👏

  • @666eee7
    @666eee7 2 года назад +1

    Câta treaba pff!!

  • @keepinitrealTRUTHFUL
    @keepinitrealTRUTHFUL 7 месяцев назад

    This such a greedy,selfish, capitalistic design....

  • @lou007
    @lou007 2 года назад

    wtf that;s not nice 🤣🤣🤣🤣 minute 12

  • @samyrocks4140
    @samyrocks4140 2 года назад +1

    Dayyum very informative video. I have to replace the air conditioning vaporizer cuz its leaky i have no ac in this fkIng hot summer but my mechanic said 1k € only for demounting 🥲

  • @profiralin3125
    @profiralin3125 2 года назад

    Salut cum ai testat head up display-ul?

    • @MOvidiu
      @MOvidiu  2 года назад

      Salut . te referi la cum l-am verificat inainte de montaj? am un banc de teste , dar si pe masina se poate daca dai la oparte instrumentele de bord si conectezi in mufa noul HUD...

  • @toufikbabeloued5246
    @toufikbabeloued5246 2 года назад +1

    👏👏👏👏