VERY IMPORTANT maintenance point for your Honda HSS724-928-1332 snowblower . Save future problems. Copper anti seize I use here amzn.to/4eUvdPv Check out Facebook Group here; facebook.com/groups/180228506224122
Hello Anthony. I saw your videos on chute moters. Very good. I have a HS724 and the motors are very different. Would you have a video on how to remove these please. Paul
There's no way to grease the auger shafts or the impeller shaft without taking them out unlike the old HS models where you can take the 12mm bolt off & spray grease in them is there?
other than spraying some light grease around the auger gearbox area, I do not know . you can remove the shear pins and spin the augers to see if it needs more servicing though.
I'll have to check my HSS928. Why does yours need adjustment? is it the right size? please pose this question here facebook.com/groups/180228506224122/
VERY IMPORTANT maintenance point for your Honda HSS724-928-1332 snowblower . Save future problems.
Copper anti seize I use here amzn.to/4eUvdPv
Check out Facebook Group here; facebook.com/groups/180228506224122
Keep the maintenance tips on those newer Hondas coming..we need you. Thx for the great vids
Thanks for watching. Always open to suggestions.
Great video Anthony! Never seen a video showcasing taking this newer Honda apart. Kudos
Thanks RUclips buddy. I just got my HSS models so will be having more videos for them.
@@HondaSnowblowerEnthusiasts311 that’s awesome. Glad to have you on board with the newer one. Will be watching for sure. Keep up the great videos!
@@HondaSnowblowerEnthusiasts311 is there a way to disconnect the hour meter on the Honda 1332? I read the manual and couldn’t find anything
Thanks!
thank you.
Isn't there a way to increase the reverse speed by moving a bolt to a different location/position 2?
not on hss models.
but cable can be adjusted.
@@HondaSnowblowerEnthusiasts311 New subscriber, thank you.
Hello Anthony. I saw your videos on chute moters. Very good. I have a HS724 and the motors are very different. Would you have a video on how to remove these please. Paul
nope. have you removed cover and looked? maybe get the Honda shop manual for guidance.
Those magnetic trays are great. Just got one from HF
I have 6-7 but need more. Invaluable.
@@HondaSnowblowerEnthusiasts311 I just got a Daytona jack from hf. Love it.
There's no way to grease the auger shafts or the impeller shaft without taking them out unlike the old HS models where you can take the 12mm bolt off & spray grease in them is there?
other than spraying some light grease around the auger gearbox area, I do not know . you can remove the shear pins and spin the augers to see if it needs more servicing though.
Thanks for the video Anthony. Should one remove the oil and gas from the machine before putting it in service mode?
That is what Honda recommends. I figured a way around that , that is covered in several videos.
HOW DO YOU ADJUST THE BELTS ON A HONDA HSS724A SNOW BLOWER. THE IDLER PULLEY HAS NO SLOTS FOR ADJUSTMENT. REALLY NEED SOME HELP. THANK YOU!
I'll have to check my HSS928. Why does yours need adjustment? is it the right size? please pose this question here facebook.com/groups/180228506224122/