Great to see my old car getting some well deserved TLC. Be great to see it back on the stages. It always had the induction side water manifold off the back of the head when I swapped it over to the laminova, I never got it to run cool enough on a retroford water rail. Nice one Josh and team 👍🏻
I like the way Josh is lifting a gearbox up balancing it and doing other stuff all in one go and the dude filming is just ripping the piss 😂😂 bit quality engineering going on nice job guys that cars a work of art can’t wait to see you ripping some doughnuts in it 👍
Mr reed certainly knows how to build an engine Should be fairly lively as they are the next gen on from the c20xe and he built them well Great episode as usual boys And john if your watching this use some wd40 on your wallet for some sponsorship for the lads as they advertise your engines take a hiding the way the rev the nuts ofc them all the time and not advertise a jre let go (because its rare they do )😂
Yeah he certainly does. He’s built all the XE engines we’re currently running in various vehicles. We’ll make sure we’ve got a can of WD40 ready for him next time he pops up 😂😂
@avin_the_crack he used to build my dad's hotrod engine plus other people's we know He can build an engine but he's bloody tight 🤣 Glad he's back building again as the best xe builder I've known
@avin_the_crack that would be cool as you seem to had every other ford going lol. I don't know what is about old fords they just cool growing up that's all my dad had I have always wanted one but because I have epilepsy I am not allowed to drive. That's why I like watching you guys because you do what I would do if I had the knowledge 😉
Hi , I've got 2 pairs of 4 pot brake calipers and 2 sets of vented drilled/un-drilled discs that came of Ford hubs for sale if you'd be interested, thanks Willie.
1 set are genuine Ford 4 pot calipers, they don't have a id No , the other set are AP LB10TY008AC , can't see how i could send you pictures of them, thanks Willie.
Great to see my old car getting some well deserved TLC. Be great to see it back on the stages. It always had the induction side water manifold off the back of the head when I swapped it over to the laminova, I never got it to run cool enough on a retroford water rail.
Nice one Josh and team 👍🏻
Hopefully not much longer and the old girl will be turning some wheels in anger 👊🏼
I like the way Josh is lifting a gearbox up balancing it and doing other stuff all in one go and the dude filming is just ripping the piss 😂😂 bit quality engineering going on nice job guys that cars a work of art can’t wait to see you ripping some doughnuts in it 👍
That gearbox weighs bugger all 😂 I do put the camera down sometimes to help 😂
Looking forward to this fellas 👍🏻😂
Good man 🤙🏼
That engine hoist is about 50 years old had one beat ever made💪💪
Still going strong after all that time. Testament to how well it’s made 💪🏼
Another great video, these are so addictive to watch , nice one guys 👌
Cheers! Nice to know you’re enjoying them 👍🏻
If in Doubt, give it a clout. Love the way you lads build things, just get the job done & it all works on your rare builds. 👏🏼
Best way of doing it! Doesn’t work all the time though 😂
Great to see JR making his RUclips debut!
Chose the perfect day to adorn his Avin The Crack hoodie 🤩
Always nice to see the Bristol Ari vataen doin a bit
👍🏻👍🏻
Coming on lovely lads! Nice bit of fabrication on the fly…. Pass the ‘ammer over ‘ere! 😂😂
That hammer was used far too much that day! 😂
Great laugh has usual thanks 😅
Glad you enjoyed it 🤙🏼
Excellent work chaps and a right old giggle along the way 😂😂😂
The way it should be 😁
Get on boys, enjoying the build, currently doing mine but mine needs a lot more metal work than this did!
Keep on grinding you’ll get there 👊🏼
Great fun had by all, coming along nicely now. Keep it up lads
Cheers, will do 🤙🏼
Love you boys from Swindon
Cheers! 🤙🏼🤙🏼
Enjoyed that
Good to hear 🤙🏼
Spot on as usual.
🤙🏼🤙🏼
Cracking job boys coming on now 👍
Cheers, she is indeed 🤙🏼
love the content brilliant as always
Cheers! Hopefully we’re getting a bit better!
great video lads
Cheers 🤙🏼🤙🏼
Some toys lads 👊💚
Keeps us busy!
@@avin_the_crack love the vids keep it up 💚👊
Cheers! We’ll try 😅
@@avin_the_crack away a good laf watching 👊💚
I had to cut the input shaft by 6mm when I fitted my tractive to my 2.0 ltr duratec. Engine wouldn’t turn when the box was bolted up.
The engine and box have already been in and running so if that was needed originally then I’d say it has already been done. Good to know though 👍🏻
Mr reed certainly knows how to build an engine
Should be fairly lively as they are the next gen on from the c20xe and he built them well
Great episode as usual boys
And john if your watching this use some wd40 on your wallet for some sponsorship for the lads as they advertise your engines take a hiding the way the rev the nuts ofc them all the time and not advertise a jre let go (because its rare they do )😂
Yeah he certainly does. He’s built all the XE engines we’re currently running in various vehicles. We’ll make sure we’ve got a can of WD40 ready for him next time he pops up 😂😂
@avin_the_crack he used to build my dad's hotrod engine plus other people's we know
He can build an engine but he's bloody tight 🤣
Glad he's back building again as the best xe builder I've known
Sshhh he’ll get a big head and put his prices up 😂
guys any chance of finding a mk5 cortina put it on air ride and make a show stopper
There was chat of a mk5 Cortina a little while back actually 👀
@avin_the_crack that would be cool as you seem to had every other ford going lol. I don't know what is about old fords they just cool growing up that's all my dad had I have always wanted one but because I have epilepsy I am not allowed to drive. That's why I like watching you guys because you do what I would do if I had the knowledge 😉
You should let me buy your mk2 Granny.
👀
Hi , I've got 2 pairs of 4 pot brake calipers and 2 sets of vented drilled/un-drilled discs that came of Ford hubs for sale if you'd be interested, thanks Willie.
What make are calipers mate?
1 set are genuine Ford 4 pot calipers, they don't have a id No , the other set are AP LB10TY008AC , can't see how i could send you pictures of them, thanks Willie.
I've added pictures of the 2 sets of calipers and a 3rd set that I don't know much about to my profile, cheers Willie.
Will ask the lads if we have any use for them and let you know 👍🏻👍🏻