The truck looks sweet, but an increase in tire size is probably beneficial, the smaller tire combined with that much power makes for an accident waiting to happen, on such a nice investment that would be a sad day. Thx for sharing.
the ground was actually very hard so grip was an issue for everyone. the spikes seemed to be sitting on top and not digging in at all, so with al that power it was tough getting any forward drive for Darren. He tried a different tyre set which worked well, but i had gone by then so did not get to see and film it ;)
That pretty much sums it up: "Big engine sound fast, need to find mom's credit card now!" Gets to track 6 months later: "Why so hard to drive fast-sounding expensive RC?" Hits wall, goes home.
Can anyone tell me why you guys don't have any plastic cylinder shrouds on your cars. I run a modded Baja 5bss with a Zenoah g320 on grass oval like you's & would rather have the shroud off as flywheel sucks grass up into shroud between cylinder & have to clean it out after a couple runs in case of fire. Guys on 1/5th forum inform me that without the shroud the engine heats up more as it's there/designed to take airflow up & around cylinder. Is there much truth to this? Nice rigs by the way! cheers
My mate has the same motor and pipe which I had tune it right. The only problem is that pipe, the header of that pipe, is too small for that motor. We end up putting a drp pipe, and it works much better than the pipe you are running.
Every week you guys have some good filming 4 us noobs lol....Sweet ass ride, he better put rear stearing on that 5 the front wheels won't be on the ground much......
Could also be if he has the baja diff oil too thin then it will break loose quickly and pushing one tire more than the other. Easily the baja diff w that engine should be 100k minimum. Am not sure that possibly as well it has so much torque that tends to pull the car to one side.
Andrey Bo becuase it has the losi 5t chassis and front end and has the hpi baja rear end screwed to it so you can have the durability and fun of the rwd baja and have the stability of the 5t.
Sir I had been searching for nitro RC car since 3 years but I'm not able to buy it it costs high in INDIA so ..plz will u send me a gud one for my b-tech project work
yes mate.. no traction with the tyre setup and grass that day.... its a work in progress ;) the setup has now been changed and the tune is getting there
Why are the builders making exhaust that seems to blow hot heat on the engine? I would much rather like an exhaust that keeps the heat away from the engine.
Yeah definitely needs major tuning huh all I hear is pre detonation (fuel detonation before top dead center) which is all that pop poppoppop pop pop pop lol
I'm no expert but I've watched a few of this channels view now for a while and apparently it's used in the context of it being different parts from different models. I've heard people say the use parts of Baja's combined with parts from losi 5ives though i dunno if that's the case here, I'm clueless mate but that's be my guess. Something to do with the losi chassis being more stable for driving but the Baja parts being more durable with these bigger engines strapped to these cars
Check out my RCMAX playlist here! ruclips.net/p/PLxriWX5SCT-M09eWK4UQgnZOmx-HW0G-S
Como comprar uno de eso
Legend has it, he's still out there trying to lean it out.
Wwwooowww!! That thing is the most beautiful engine and truck I've ever seen!!
yes mate... probably me too
I love the power. With the right gears a speed deamon.
That’s gotta be the baddest all billet machine I’ve ever seen..Kudos bro.
Sweet ride. With bigger better tires and a rallye car chassis tune . Unstoppable
Wow that rc car is beautiful
just beautiful..and the sound...
Goddamn that’s one of the sexiest rigs I’ve ever seen my guy! WOW!
You get that beast dialed in she going to be one mean s.o.b. be insane !
u know it!... Darren was out again sunday. with his 90.. just uploading a few vids from the day...now ;)
They now sell these engines for Goped scooters. They're fast as hell to. Would love to get one of those rcmax 80cc 110mm clutch for my Goped Riot.
Why it is called "Hybrid" - what two sorts a crossed in it?
Thank You!
Why would you paint the fuel tank? I mean would you put a sticker over your fuel gauge in your commuter car?
Awesome. Sounds like dirt 2 stroke bike!!! Like it!!!
The truck looks sweet, but an increase in tire size is probably beneficial, the smaller tire combined with that much power makes for an accident waiting to happen, on such a nice investment that would be a sad day. Thx for sharing.
how much would something like that cost? its a beautiful bit of kit,
Bruh that's just insane I love it
cheers buddy
One sick looking beast dude awesome,
😎👍
Not enough grip with them rear tires . Sliding around , is the grass wet also ?
the ground was actually very hard so grip was an issue for everyone. the spikes seemed to be sitting on top and not digging in at all, so with al that power it was tough getting any forward drive for Darren. He tried a different tyre set which worked well, but i had gone by then so did not get to see and film it ;)
King 👑 of 5th scale💪👊🔥💨
yup!
What a Beast 🏁🏁🏁
Bad ass! Do u run a diff locker for grass bashing? Im building one need opinion;)
That looks awesome!
cheers mate ;)
Such a beast 👍
Wow blue is my favorite color so this thing is making me drool I want it lol
😮 OMG love the big engines in the 5th scale sounds good I need one ☝️
me too mate
That pretty much sums it up: "Big engine sound fast, need to find mom's credit card now!" Gets to track 6 months later: "Why so hard to drive fast-sounding expensive RC?" Hits wall, goes home.
It doesn’t need oil mixing rigth?
I’m gonna shit when I see somebody drop their rc on the ground, pop out the lever, jump on and kickstart their rig 😆😂
Holy Lean!!!!
Excellent 👍👍😎
it is mate! ...epic rc
Where is this field mate?
Is that the 90gt?
That’s SWEET!
I want one - where can I get the parts to build it ???
Dam!! Super bad ass !!
what is the body/chassis? I want it so I can build the 46cc 12hp OBR on it and rip xd
i just looked at the items installed on this rig price wise that is,
5000 freaking quid atleast...
this deserves a wow.....
Whatever it is, DEFINITELY too much in power. You need larger wheels and tires...BAD!
Can anyone tell me why you guys don't have any plastic cylinder shrouds on your cars. I run a modded Baja 5bss with a Zenoah g320 on grass oval like you's & would rather have the shroud off as flywheel sucks grass up into shroud between cylinder & have to clean it out after a couple runs in case of fire. Guys on 1/5th forum inform me that without the shroud the engine heats up more as it's there/designed to take airflow up & around cylinder. Is there much truth to this? Nice rigs by the way! cheers
I am a fan of 1/5 but it's just the size of the wheels that don't look big enough.
a bigger wheel set has just come out actually... 190mm i think...
RC Maxx UK hmm get some, to me it looks like it needs something like a big ass monster truck wheels and tyres.
I was thinking the same thing. Maybe it wouldn't spin out as easy with larger tires.
That was cool blue 👍
thanks mate
That sounds so good!!!
My mate has the same motor and pipe which I had tune it right.
The only problem is that pipe, the header of that pipe, is too small for that motor. We end up putting a drp pipe, and it works much better than the pipe you are running.
Crazy that it was run with out a shell I know it was being tuned and run in but if it flipped that would be a expensive day.
itsisme1993 not so bad out there thanks to the grass/lawn ! It’s definitely a work of art !!
fancy piece of equipment U gat der dude!!😂😂clean set up powerful af!!💪💪💨💨💨
Is he running lean?
Wow!!!! 😍😍
indeed mate. crazy build!
Man that thing is a beast I would be afraid to drive it lol nice build.
Sick! When it's tuned and broken in I think he will need that wheelie bar and some new tires! Lol!
true mate ;)
Holly shit Batman that looks awesome 🔥👍👌🤜🤛
up close in person it looks even more amazing!
What's with the 1/8 scale tires?
As Steve Irvin would say....."What a RIPPA"!!!!!
Wow looks so sick!!! Completely metal, 90cc without flipping over thats insane!
Without flipping? Can't even keep it straight! Why sooo much power and you can't even drive it...cool shelf-queen though.
Every week you guys have some good filming 4 us noobs lol....Sweet ass ride, he better put rear stearing on that 5 the front wheels won't be on the ground much......
true mate... steer from the rear! ;)
Nice truck man. I would love to race it
cheers ... just put out a vid on the ALX 85cc hybrid... another MONSTER!
I would love to race it as well
Could also be if he has the baja diff oil too thin then it will break loose quickly and pushing one tire more than the other. Easily the baja diff w that engine should be 100k minimum.
Am not sure that possibly as well it has so much torque that tends to pull the car to one side.
Awesome !!
What motor do you recommend for the losi DBXL?
Also that the body can fit as well
Mamba monster XLX 8s system with 800kv castle
Dave's discount motors upgrades.. no longer in bizznesss locss
Nice what is a Price I have buy
Definitely a nice set up and you have big money in that. The motor alone is 2500, But I will still wax you with my x Max
It's got nothing to do with speed or over the counter bought buggies. It's the fact it was most likely all hand built.
Wowww,fiwwitwitwit...I like it,next
Ok so where do I make my order
Nice dude
Where's the body ?
COOL!!!
On such a model you need huge wheels !!! From the MTXL!))))
And why is it called * HYBRID * ????
Andrey Bo becuase it has the losi 5t chassis and front end and has the hpi baja rear end screwed to it so you can have the durability and fun of the rwd baja and have the stability of the 5t.
Karrie Bhurgari
AAAAAAAAAAAAAAA. Exactly.))))
Immediately did not realize!))))
yup! thats it. mtxl tyres?... that would be a laugh to watch...PIZZA CUTTERS! if they stayed on for more that a cpl seconds! ;)
Holy jeezus freaking xmass!!!!! Dude that is badd asssss...very nice.
Where you get wheelie bar,I want one for my rc max 70cc thank
Sir I had been searching for nitro RC car since 3 years but I'm not able to buy it it costs high in INDIA so ..plz will u send me a gud one for my b-tech project work
بونجور🤩🤩🤩🤩
Were can i buy
I really like it but the anodising looks cheap like its from an old hsp anodising. The number of parts done too. But its probably 3-4k sterling.
Poke Mon for sure... likely £4K+😵
what gearing numbers?
Di indonesia ada gak hrga brp ya
90 cc? Isn't that the size of the piston?.. if so than how is my 80cc dirt bike piston bigger than this whole motor?
That’s actually a good question, here’s the answer: I don’t know.
That’s a goddam go cart if you could sit on it you could drive it
That is one bad ass bitch I think flies it's like my RC boats
Nice 😍😍 what is total cost of build ? If I can ask heh?
I always wanted to to take a 80cc rma or kx engine and put it on an rc car and have it shift gears but I guess that's stupid
High quality gear
Dam anouther level 👍
Why run tiny tires on the front and fat tires on the back? It's 4 wheel drive not 2wd. Just saying...
$?
Looks like its got lots of power but poor traction? Not great at cornering from the clip
yes mate.. no traction with the tyre setup and grass that day.... its a work in progress ;) the setup has now been changed and the tune is getting there
Wau amazing
90cc gosh that has a moped engine on it almost
That is one hell of a Rc bro very handsome 👍🏼👍🏼💥💥👍🏼👍🏼
👍👍👍👍
Is that a airplane motor?
Why are the builders making exhaust that seems to blow hot heat on the engine?
I would much rather like an exhaust that keeps the heat away from the engine.
Links on motor/hybrid parts, would like to build one
Yeah definitely needs major tuning huh all I hear is pre detonation (fuel detonation before top dead center) which is all that pop poppoppop pop pop pop lol
This shit should go for drift king
When you first started driving it i was like that sounds awful then i see the guy start tuning it.
Rx king
Why is it called a "Hybrid"? It doesn't have an electric motor.
I'm no expert but I've watched a few of this channels view now for a while and apparently it's used in the context of it being different parts from different models. I've heard people say the use parts of Baja's combined with parts from losi 5ives though i dunno if that's the case here, I'm clueless mate but that's be my guess. Something to do with the losi chassis being more stable for driving but the Baja parts being more durable with these bigger engines strapped to these cars
I bet that thing weighs a ton
it does! ;)
RC Maxx UK is this over or under 23 kilos?
For sale
mantul
Que chido
elle es purement magnifique