Pioneer SX 780 upgrade to the STK 0050 module II. Is it worth it?

Поделиться
HTML-код
  • Опубликовано: 21 дек 2024

Комментарии • 67

  • @mistermac56
    @mistermac56 Год назад +10

    Nice work on a great receiver. The new discrete modules are a godsend as a replacement for the STK 0050 Darlington modules. They are reasonably priced and the build quality of them is excellent.

  • @Craig_Spurlock
    @Craig_Spurlock Год назад +6

    A buddy bought a very clean SX-780 on Ebay, and it had a defective STK0050 that had already been changed once. I convinced him we should go with the discreet modules, and once I got them installed, they worked perfectly. After adjustments, I measured about 52 clean watts per channel into 8 ohms. The modules sound great too!

  • @Cass48
    @Cass48 11 месяцев назад +5

    I just had this done to my 780. It sounds great.

  • @brianchisnell1548
    @brianchisnell1548 3 месяца назад +2

    Wow Joe. This was fun! I puchased my 780 in 1980. After 6 or 8 years, the power on relay failed. A local tech replaced it . Still going strong 36 years after that. My rig is this receiver, HPM-100s, PL-530, CTF-650. Part time, Man cave use. I was 22 when I bought it. I subbed!!

  • @craigm.9070
    @craigm.9070 Год назад +5

    Excellent work! I've seen several of these STK transplant kits installed now; they seem very well made, durable, and serviceable. Another great, classic receiver prepped for a long run, your customer is most certainly happy with the results. Thank you for your time

  • @Ezzell_
    @Ezzell_ Год назад +4

    Great video. I would like to see a video on your light bulb load box. Could you do a video on it?

  • @TurntableGuy
    @TurntableGuy Год назад +2

    Good job. The aftermarket STK0050s are actually not bad and seem to work well without blowing up, but it's nice to have an alternative.

    • @marka1986
      @marka1986 10 месяцев назад +1

      The quality is variable. I did a repair and went through 4 of them in 6 months. Ordered some more from a different place and no problem since.

    • @acoustic61
      @acoustic61 10 месяцев назад +2

      @@marka1986 Where did you get the good ones?

  • @elsaarmstrong-zp6ng
    @elsaarmstrong-zp6ng Год назад +1

    Best audio amp I have ever heard was a pair of Leak TL50 tube amps. Fronted by point plus stereo pre amps. KT88 tubes/valves give soft clipping on even harmonics distortion. Gives out presence like a live music event! Of course you need decent sized speakers like Tannoy Westminster’s which can shift air! Many guitar players like even harmonics distortion i.e. Fender , Gibsons etc!

  • @Fanan67
    @Fanan67 Год назад +4

    Hi, very nice work. One suggestion. Make a lock for your spinning base. She spins very easy witch is good, but when you are making measures or soldering it should be lock and steady. Because if loose you can make a short or a bad join. Thank you for your videos.

    • @VintageAudioFever
      @VintageAudioFever  Год назад +1

      hey!!! yes I agree it does get away from me sometimes, I unusually wedge something to stop the spinning when I need to, other than that, I find this table very useful, especially when I am all set it for testing the unit, I can access the front/back but rotating the table without disturbing any of my probs....

    • @Fanan67
      @Fanan67 Год назад

      @@VintageAudioFever I have one also, they are a must have. I lock mine when I need to, because I already had the probe hitting a wrong place and got sparks and smoke.

  • @kennethiman2691
    @kennethiman2691 Год назад +7

    If he wants a forever receiver, I would have done a total recap. They are decades over their lifespan.
    Love those STK replacements.

    • @VintageAudioFever
      @VintageAudioFever  Год назад +2

      Hey Kenneth
      Capacitors statement is fair enough!! he will have no issues with those caps on this unit for many years to come but again, it's what the owner wanted....I totally respect that!!

    • @bulgoczacybulgotnik
      @bulgoczacybulgotnik 8 месяцев назад +1

      Also put bigger caps in power supply 10000 to 15000uF would B fine

    • @danielknepper6884
      @danielknepper6884 7 месяцев назад +1

      Yeah until you blow your bridge rectifier​@@bulgoczacybulgotnik

  • @deweydodo6691
    @deweydodo6691 10 месяцев назад +2

    Now I miss my lights on the front face. Think I am down to one bulb on the right side . I bought my sx780 new and its never been serviced. It plays reasonably well yet.

  • @g.fortin3228
    @g.fortin3228 Год назад +2

    Nice job Joe !! If i find one of these ailing but clean,and can pick it up cheap, it's nice to know this is a worthy repair.

  • @piotrfi8004
    @piotrfi8004 4 месяца назад +2

    When Pioneer SX-750? ❤️

  • @rajoconnor
    @rajoconnor 2 месяца назад +1

    Where did you get those meter clips? I need some of those! Also, I’ve used similar stk replacement modules with fantastic results in a sx-680 as well.

  • @alexzildjian
    @alexzildjian Год назад +2

    YOUR NEW SUSCRIBER 😃 love vintage gear Hi from Baja California MÉXICO 🇲🇽😊

  • @apolinarmartinez5723
    @apolinarmartinez5723 4 месяца назад +2

    Great video

  • @thwickman
    @thwickman 3 месяца назад +1

    Do you have any info or a link where to get those stk,s?

  • @Silverface1987
    @Silverface1987 Месяц назад +1

    Can you tell us where these power pack came from. What person or company made them.

    • @VintageAudioFever
      @VintageAudioFever  Месяц назад

      You can get them on ebay...look up stk-0050 module 2

  • @bonno666
    @bonno666 Год назад +1

    I had an Akai PA-W04 amp with similar STK 0050-II, and the paint came off too. It could have been that way from factory.
    Would these STK replacements work for a STK0070-II. So with the suffix II behind the number. He is selling them without the type 2 suffix

    • @VintageAudioFever
      @VintageAudioFever  Год назад +3

      I beleive that these STK modules are for several models, I know the seller will answer better on your question than I could and he does responds to questions...

  • @terencekaye9948
    @terencekaye9948 5 месяцев назад

    Is there a schematic for those modules?

  • @DaveofAllTrades75
    @DaveofAllTrades75 5 месяцев назад +1

    Hey joe could you provide a link or name of seller you got the discrete replacements from? I have found some on various places on eBay but they’re the ones you have to build yourself and I would rather get a set that are already made and done professionally like the ones in your video for my pioneer 780. If you could let me know I would appreciate it

    • @VintageAudioFever
      @VintageAudioFever  5 месяцев назад +2

      my buddy Tim is the guy that bought those STK modules from ebay, I think. I will make sure he see's your comment and hopefully he will get back to you with your question.

    • @darylsans
      @darylsans 5 месяцев назад +1

      @@VintageAudioFever I am interested in the modules as well.

    • @jedhatcher252
      @jedhatcher252 3 месяца назад

      I want one for the 950 if possible?

  • @Luke-12V
    @Luke-12V 11 месяцев назад +1

    good evening, I really like watching your videos, I really appreciate it, could you please tell me how to easily calculate the power of the amplifier According to RMS, as you showed in the video, 21rms is equal to 51 watts, or something like that, thank you very much for any explanation, All the best

    • @VintageAudioFever
      @VintageAudioFever  11 месяцев назад +2

      Hi Luke...thank you for watching my videos.
      The watts per channel are measured RMS X RMS and you decide that number by the ohm you used...so let's say 21 rms would be...
      21x21 / ohm resistance...

    • @Luke-12V
      @Luke-12V 11 месяцев назад

      @@VintageAudioFever thank you very much

  • @John-N-541-ym7dx
    @John-N-541-ym7dx Год назад

    Have a SX 780 that eventually will need the STK transplant done, but not until my SX 980 goes down and cannot be brought back to life.

  • @geoepi321975
    @geoepi321975 13 дней назад

    Hi joe, how you align this stk amps can you advise, cause I have a Hitachi old one that has sentimental value for me 😢

    • @VintageAudioFever
      @VintageAudioFever  12 дней назад

      Hi Geo
      If your talking about the stk...you can't align the powerpack...already set to go once they are replace....

  • @brunY741
    @brunY741 8 месяцев назад

    Hi. Any video on the LX-690 Pioneer?. Mine lights up but no click/relay. I changed the stk0039 with no result. Humm....

    • @VintageAudioFever
      @VintageAudioFever  8 месяцев назад

      affraid not a audio ive worked on as of yet....
      why did you change the STK's we're they short? and your saying it didn't correct it'self after you change STK?

    • @brunY741
      @brunY741 8 месяцев назад

      @@VintageAudioFever hi. Thanks for coming back. No I tried to change the stk because I had a couple of it. With poor diagnose method! Shame on me.

  • @albertoortizsanchez7229
    @albertoortizsanchez7229 Месяц назад +1

    40:27 Excelente reparación, poseo un Pionner STK, 780.
    Los STK fallaron. Por favor indíqueme en dónde puedo adquirirlos y seguir disfrutando del excelente sondio
    GRACIAS. COLOMBIA.

  • @fedinkov
    @fedinkov 6 месяцев назад +1

    🤘

  • @stevenjosephs9
    @stevenjosephs9 4 месяца назад

    What State are you in ( United States ) ?

  • @billpeirce7
    @billpeirce7 Год назад

    Where can I buy these modules?

    • @VintageAudioFever
      @VintageAudioFever  Год назад

      @VintageAudioFever
      • 0 seconds ago
      the customer bought them on ebay , type in STK-0050 module II

  • @markmurray5619
    @markmurray5619 Год назад +1

    The new STK modules look just like the modules xraytonyb designed.

    • @VintageAudioFever
      @VintageAudioFever  Год назад +1

      I seen xraytonyb video on these STK, I didn't know he designed them, I thought he had bought the disassembled kit and he put it all together...I could be wrong tho...
      xraytony is a great channel for sure!!

    • @videocast3655
      @videocast3655 Год назад

      correct. xraytonyb credits the designer in his video@@VintageAudioFever

  • @RalphRacc00N
    @RalphRacc00N Год назад +2

    I believe those are original power packs, The paint falling off is most likely age. Now if someone would remake the FM integrated circuits.

    • @VintageAudioFever
      @VintageAudioFever  Год назад

      Hi Ralph...the reason I say they may not be original STK is simply the paint rubbing off.. I was suppose to compare with one that I believe is original but I miss to show it on this video, regardless if they were or not, the customer find them working nicely on this receiver before changing them to the new modules...

    • @videocast3655
      @videocast3655 10 месяцев назад

      @@VintageAudioFever I am a one owner of a 780 and replaced the original packs on it several years ago. They are clearly marked Sanyo on the face. all the replacements I bought just say darlington or whatever on them. I guess there may be some knock offs out there with sanyo on them, but I doubt if they are real this far down the road

  • @AN-ce1nd
    @AN-ce1nd Год назад

    I had one brand new in 1980. I also had a Marantz 2216B. Guess which one I kept? The Marantz, pioneer is absolutely pure junk.

  • @len9518
    @len9518 3 дня назад

    Nice, but you talk too much. You could have easily cut thiis down to 20 minutes, 25 at most.