Thank you for this. Been changing every part known to man on my 01. Gonna change all this and see if it solves my issues. Truck starts fine when cold. Get warms. Shut off. Won’t start til she’s cold again. Had some advice saying change the pickup coil. Anyway thanks man. 🤙🏻
Good luck, I hope it fixes your issue. If not you might have do to the dreaded plenum gasket. Im actually doing mine whenever it stops raining and or freezing here. Thanks again for watching! Please like and subscribe every little bit helps during these times. Seize the day each and everyday-Are Jay Here is our Dodge playlist inncase you ever need it. Top 2nd gen 1994-2002 Dodge Ram repairs and upgrade videos: ruclips.net/p/PLQ0kUxbVWpJ-ebGroH9mPPUSfTWONjU-0
okay i know this was 5 months ago, but i have the exact same problem, and i was wondering, did you ever find out what the problem was? because ive changed bout every part too lol
It helped for about 2-3 months. You dont want to know what finally fixed it. I did this repair 4 months ago, but just got around to uploading it. Good luck! Please like and subscribe every little bit helps during these times. Seize the day each and everyday-Are Jay Here is our 2nd gen playlist in case you ever need it Top 2nd gen 1994-2002 Dodge Ram repairs and upgrade videos: ruclips.net/p/PLQ0kUxbVWpJ-ebGroH9mPPUSfTWONjU-0
Your welcome, I actually filmed this a month ago and never got around to merging the parts and uploading. Just went through a little rough patch, that had me questioning everything. But I hope I'm back now and can continue making videos people need. Thanks again for your continued support, it means alot. Seize the day each and everyday-Are Jay
100% agree. It tears up your stomach laying across the radiator and engine. Hope it helped you. Thanks for watching! Please like and subscribe every little bit helps during these times. Seize the day each and everyday-RJ
Yes, I used to use a furniture moving pad as well, but mine got messed up, I should get some new ones since we just got our son his first truck and have lots of wrenching to do. Thanks again.
Hope this helps me. I got the p0340 cam sensor/phaser code intermittent but doesn't always keep it from starting when the engine lights on. Not good to have as a pizza driver. Can't get stranded at the hotels or apartments having to kill it for security.
Ive got a 98 ram 1500 thats been sitting for 4 years. Its giving me a crank but no start condition. Fuel pump kicks on for 3 seconds and then goes off when key is placed to on position. While cranking, the tach gage doesn't show and deflection. No spark coming off the coil either. So my initial thought was crank position sensor. Hooked it up to a scanner and im getting two codes: Crankshaft position sensor and Camshaft position sensor which I believe is the distributor "pickup" as you described here. Seems odd they would both be bad?? Any advice? change em both I guess?
Thanks " are Jay." Now I did my passanger exhaust manifold that wasn't fun at all I took off fender and inner complete fender all bolts was rusted garbage took me month alone to fix it, Now driver side back firewall exhaust gasket leaking, here I go same crap but worse, electrical box there, brake lines, what pain in butt. Mine runs but dude that had truck did nothing to it since 2001 lucky oil changes was good 👍 fuel rail lines was junk, replaced, others wise it okay for 4x4 2500 extended cab Comments welcome 🙏
You're welcome! Thanks for watching! We are glad it helped you. Please like and subscribe every little bit helps during these times. Seize the day each and everyday-Are Jay. Here is our 2nd Gen playlist in case you ever need it. Top 2nd gen 1994-2002 Dodge Ram repairs and upgrade videos: ruclips.net/p/PLQ0kUxbVWpJ-ebGroH9mPPUSfTWONjU-0
Have you took off your air filter housing and looked through your throttle body with a flashlight? If you do and see oil sitting in the intake manifold, you have a bad plenum gasket. The best fix is the hughes plenum gasket kit. If it ends up being that be carefull removing the bolts into the block. Pb blast them repeatedly you do not want to brake a bolt off into the block. I am actually contemplating doing a plenum gasket kit soon. But i am currently doing timing chain gasket and timing chain and replacing temperature seding sensor and thermostat and housing while I am in there. Good luck. Also check the vacuum hoses on the back left side of the engine by where the ac lines go through the firewall. They brake alot and cause vacuum issues. Thanks for watching! Seize the day each and everyday-Are Jay
Thank you for this. Been changing every part known to man on my 01. Gonna change all this and see if it solves my issues.
Truck starts fine when cold. Get warms. Shut off. Won’t start til she’s cold again. Had some advice saying change the pickup coil.
Anyway thanks man. 🤙🏻
Good luck, I hope it fixes your issue.
If not you might have do to the dreaded plenum gasket.
Im actually doing mine whenever it stops raining and or freezing here.
Thanks again for watching!
Please like and subscribe every little bit helps during these times.
Seize the day each and everyday-Are Jay
Here is our Dodge playlist inncase you ever need it.
Top 2nd gen 1994-2002 Dodge Ram repairs and upgrade videos: ruclips.net/p/PLQ0kUxbVWpJ-ebGroH9mPPUSfTWONjU-0
okay i know this was 5 months ago, but i have the exact same problem, and i was wondering, did you ever find out what the problem was? because ive changed bout every part too lol
R J you the MAN ! Did this fix the IDLE !
It helped for about 2-3 months.
You dont want to know what finally fixed it.
I did this repair 4 months ago, but just got around to uploading it.
Good luck!
Please like and subscribe every little bit helps during these times.
Seize the day each and everyday-Are Jay
Here is our 2nd gen playlist in case you ever need it
Top 2nd gen 1994-2002 Dodge Ram repairs and upgrade videos: ruclips.net/p/PLQ0kUxbVWpJ-ebGroH9mPPUSfTWONjU-0
Thank you sir, this is the video I needed to see.
Your welcome, I actually filmed this a month ago and never got around to merging the parts and uploading.
Just went through a little rough patch, that had me questioning everything. But I hope I'm back now and can continue making videos people need.
Thanks again for your continued support, it means alot.
Seize the day each and everyday-Are Jay
This job is HELL!! Damn distributor is buried and can barely be seen!
100% agree. It tears up your stomach laying across the radiator and engine.
Hope it helped you.
Thanks for watching!
Please like and subscribe every little bit helps during these times.
Seize the day each and everyday-RJ
@@RJsGarages I used two thick furniture pads to lay across the fan shroud and engine. It helped a lot, but it is still a very tough job.
Yes, I used to use a furniture moving pad as well, but mine got messed up, I should get some new ones since we just got our son his first truck and have lots of wrenching to do.
Thanks again.
Gracias EXELENTE cuánto necesitaba ver un video así y lo encontré ..Bendiciones!
Hope this helps me. I got the p0340 cam sensor/phaser code intermittent but doesn't always keep it from starting when the engine lights on. Not good to have as a pizza driver. Can't get stranded at the hotels or apartments having to kill it for security.
Ive got a 98 ram 1500 thats been sitting for 4 years. Its giving me a crank but no start condition. Fuel pump kicks on for 3 seconds and then goes off when key is placed to on position. While cranking, the tach gage doesn't show and deflection. No spark coming off the coil either. So my initial thought was crank position sensor. Hooked it up to a scanner and im getting two codes: Crankshaft position sensor and Camshaft position sensor which I believe is the distributor "pickup" as you described here. Seems odd they would both be bad?? Any advice? change em both I guess?
Nice video, thanks.
Thanks " are Jay." Now I did my passanger exhaust manifold that wasn't fun at all I took off fender and inner complete fender all bolts was rusted garbage took me month alone to fix it, Now driver side back firewall exhaust gasket leaking, here I go same crap but worse, electrical box there, brake lines, what pain in butt. Mine runs but dude that had truck did nothing to it since 2001 lucky oil changes was good 👍 fuel rail lines was junk, replaced, others wise it okay for 4x4 2500 extended cab Comments welcome 🙏
Thank you....
You're welcome!
Thanks for watching!
We are glad it helped you.
Please like and subscribe every little bit helps during these times.
Seize the day each and everyday-Are Jay.
Here is our 2nd Gen playlist in case you ever need it.
Top 2nd gen 1994-2002 Dodge Ram repairs and upgrade videos: ruclips.net/p/PLQ0kUxbVWpJ-ebGroH9mPPUSfTWONjU-0
I have a vaccum leak as well I can't find causing a rough an high idle. Please do a video on vaccum leaks
Have you took off your air filter housing and looked through your throttle body with a flashlight?
If you do and see oil sitting in the intake manifold, you have a bad plenum gasket.
The best fix is the hughes plenum gasket kit. If it ends up being that be carefull removing the bolts into the block. Pb blast them repeatedly you do not want to brake a bolt off into the block.
I am actually contemplating doing a plenum gasket kit soon.
But i am currently doing timing chain gasket and timing chain and replacing temperature seding sensor and thermostat and housing while I am in there.
Good luck.
Also check the vacuum hoses on the back left side of the engine by where the ac lines go through the firewall. They brake alot and cause vacuum issues.
Thanks for watching!
Seize the day each and everyday-Are Jay
Yes sir good video thank you
Thanks for watching, we're glad you like it.
Seize the day each and everyday-Are Jay
👍🏼
Do you have sound of engine B4 your fix?