Mercedes Sprinter Limp Mode Intake Flaps Stuck OM642 Engine

Поделиться
HTML-код
  • Опубликовано: 19 дек 2024

Комментарии • 16

  • @leeb3644
    @leeb3644 Год назад +1

    Place a 4.7K ohm 2W Resistor in the swirl connector plug, across position 2 and 3.
    This will trick the ecu and stop the limp mode.
    Here in the UK it still passes the emissions test, it may not be the same in the US.
    The OM642 is a super engine.
    I believe it is the Nag1 transmission on the van, and again it’s excellent.
    I know of some Mercedes and Chrysler vehicles with over 300k miles and no issues.

    • @BellcoVans
      @BellcoVans Год назад

      have you tried to trick a computer by doing this resistor trick? if so on what year and make?

    • @leeb3644
      @leeb3644 Год назад

      Been used on vehicles dated from 2005-2010, but any year will be fine if it’s an om642

  • @LAactor
    @LAactor Год назад +3

    but don't forget, that can the guy took camping and either got stuck and spun the tires or they were trying to use it to pull vehicles or tug out of mud to burn the trans like that. Hope you do not associate with them anymore. They will abuse your goodwill.

  • @ztech6596
    @ztech6596 Год назад +2

    OM642 at least doesn't fail catastrophically like BMW N57 and many other modern engines with failed crank or rod bearings....

  • @LAactor
    @LAactor Год назад +3

    That's a lot of risk to take on for what returns you might get from it. I think stay with your S class as the only Mercedes in the family for now. With fair market for this 07 Dodge 2500, it's about 6k and that's not considering the windshield and major EGR replacement. If I'd buy, I'd only deduct the cost of the repairs first. And that's of the set if tires are still usable.

  • @Esteban_Herrera
    @Esteban_Herrera Год назад +1

    Wow that was depressing. 😞

  • @tjts1
    @tjts1 Год назад +2

    After replacing the intake, replace the steel pipe between the EGR valve and intake with block off plates. You might get a CEL for low EGR flow but no limp home mode and the new intake stays clean.

  • @murat5163
    @murat5163 Год назад

    Could i get an appointment to bring my 2005 Sprinter which has black death ?

  • @monolitomonolito2191
    @monolitomonolito2191 Месяц назад

    Hi there l do have dodge sprinter 2007 l will like to take to your shop to get fix let me know thanks

  • @TH-cl5be
    @TH-cl5be Год назад

    hello good vids, i have a problem with my 08 sprinter its fine when its cold and started it will drive all over the country but as soon as its up to temperature and its turned off then restarted it starts up in some sort of limp mode and wont come wright until its cooled back down usually takes 2hrs but if i dont turn it off it will drive fine all day, theres no fault codes coming up , any idea what could be wrong with it ?

  • @goatman702
    @goatman702 Год назад

    Thinking of buying the 04 dodge sprinter 2.u turbo diesal, drives fine but not sure on overall review, it's 10k $ with 220k miles, any input? I've watched every RUclips video I could find for the last 2 weeks lol

  • @kathryntokarska1738
    @kathryntokarska1738 Год назад

    sir, are you available for hire?

  • @ranat5526
    @ranat5526 Год назад +3

    Just remove them and by pass with a resistor.

    • @tjts1
      @tjts1 Год назад +1

      Doesn't work

    • @LAactor
      @LAactor Год назад +1

      why not? egr is useless system for g0v regulation@@tjts1