Hi...I just started working on a CNC machine recently so I am fairly new. However the manual guide used to load automatically on startup of the machine but now it doesn't and I have to use NC programming mode...how do I fix this?
Yes, that's exactly what that is. I use CC to break all sharp edges by using it after every face, call a .030 radius with CC, then calling out a left move OD length.
Also sorry for the double post but you don't need to account for the .030 CC on your UP move. You up move to the OD you wish to go, use CC, then left for length of that OD. Now CC does have it's limit (I think it will error around .2 CC) then you will need to call out an arc instead.
I don't think this is a wise tutorial. Why wouldn't you teach us how to do facing inside of the Outer Roughing Cycle because you know that TAB4 offers facing in it making this tutorial, obsolete on the sheer premise that to do it the way you suggest here is longer...
in 12 minutes I would have already made 50 pieces by writing the same program in ISO, this means that the graphical interface can only be used in the phases of emptying pockets or complex contours ...
50 parts in 12 minutes is just comic... But programming something like this in ISO would be so much faster... we have a program where we have all cycles we use kinda pre-written, so when I need to program something fast or just make one part, I´ll open that program, copy every operation I need to the top, make it M05; M30; and re-write the coords.... Easy as that, no fucking around in Manual guide...
@@Joshua-dg6re Yes the Mori Seiki caps is much better.. even the okuma igf from over 20 years ago was better then this.. very simular to mori caps... just draw the part and add the tool information
@@kuei1215Used Mazatrol for 20 plus years.. Love it. But here in Oklahoma the MAZAK customer service is non existent!!! Therefore we are moving forward with Hyundai. Hopefully I will be able to be somewhat proficient with this programming..
Great in detail video, answering all the question i had. This is very helpful for new machinist.
It was helpful to me, so thank you for making this video.
Hi...I just started working on a CNC machine recently so I am fairly new. However the manual guide used to load automatically on startup of the machine but now it doesn't and I have to use NC programming mode...how do I fix this?
Saludos jorge de mexico siempre queriendo aprender gracias por los videos
Are CR and CC for Connecting Radius and Chamfer? Wondering how to do corner rounding without having to call out an arc move.
Yes, that's exactly what that is. I use CC to break all sharp edges by using it after every face, call a .030 radius with CC, then calling out a left move OD length.
Also sorry for the double post but you don't need to account for the .030 CC on your UP move. You up move to the OD you wish to go, use CC, then left for length of that OD. Now CC does have it's limit (I think it will error around .2 CC) then you will need to call out an arc instead.
I have question, after i finished drawing and program when i simlate alarm on at G1456 say figure is not closed please help me on this problem.
might be a little late, but your ending point within your figure must be equal to the starting point.
Like some help with Fanuc 21-t from starting and programing
is this still the same in 2022? or have updates been made?
After running Mazak for 20 years, this looks like it takes a lot more time for the same operation then Mazatrol.
depends on how used you are on the machine i guess.
Hello! Where can I download manuals ?
If u didnt finish writing program, can u start off from where u ended?
It depends on where you stopped. If you do not insert the program, no. If you insert the program, yes.
I’m looking for programs to work on at home. CAN SOMEONE HELP ME ON THIS
Podrías pasar explicaciones en español somos muchos los españoles con ganas de aprender
I don't think this is a wise tutorial.
Why wouldn't you teach us how to do facing inside of the Outer Roughing Cycle because you know that TAB4 offers facing in it making this tutorial, obsolete on the sheer premise that to do it the way you suggest here is longer...
Someone can tell me, if i have manual guide key. Can i somwere download program from my pc ?
❤❤
Is a student version available for download?
i asked my employers this all the time, they said it costs them money to do that
Hi.do you have manuale guide at linguage italien??thanks
salem khoya ruclips.net/video/LHvYg80Au58/видео.html buona programmazione
how can i get this foftware for download
It is paid software, you must be an existing FANUC customer.
I WOULD IKE TO DOWNLOAD THIS SOFTWARE
اريد تحميل هذا البرنامج
in 12 minutes I would have already made 50 pieces by writing the same program in ISO, this means that the graphical interface can only be used in the phases of emptying pockets or complex contours ...
Please make a video to educate us.
Did you make the 50 pieces in 12 minutes with the face diaper on or off?
50 parts in 12 minutes is just comic...
But programming something like this in ISO would be so much faster... we have a program where we have all cycles we use kinda pre-written, so when I need to program something fast or just make one part, I´ll open that program, copy every operation I need to the top, make it M05; M30; and re-write the coords.... Easy as that, no fucking around in Manual guide...
Mori has a way better conversational. Just draw the part.
@@Joshua-dg6re Yes the Mori Seiki caps is much better.. even the okuma igf from over 20 years ago was better then this.. very simular to mori caps... just draw the part and add the tool information
Step 1. Buy a Hurco
I bet I could type the program faster line per line for how long its taking you to use this mess just to write the program ... 🤣😂🤣
This is fanuc's desperate attempt to compete with Mazatrol.
@@kuei1215Used Mazatrol for 20 plus years.. Love it. But here in Oklahoma the MAZAK customer service is non existent!!! Therefore we are moving forward with Hyundai. Hopefully I will be able to be somewhat proficient with this programming..
@@mrniceguy3750 Hyundai wia machines ? which one are you getting , and what are your thoughts about it if you already started using it ?
@@mrniceguy3750 im in the same boat bud, trying to learn fanuc to expand me abilities but its frustrating using fanuc for basic operations.