Model Garbage Truck Collecting Mini Bins
HTML-код
- Опубликовано: 5 сен 2024
- Been a while getting this together!
Just finished the new truck, took about a year and was a frustrating process. I hope you enjoy this light Garbage load, will upload Recycling and Greens later.
I hope you like the new truck and notice the improvements over the last one. I will also upload a video of some progress photos that haven't been seen before and some photos that were invaluable when building this, as well as some welding footage I took.
All of the welding, fabrication, wiring, painting and programming was done by me. Building these trucks has taught me so much, mostly what not to do and what to think about more before attempting.
The video also features my new mini bins, being the new Brickwood and Mastec style bins shown near the start.
Enjoy, Cheers!
Those Brickwoods look amazing!
Thanks mate!
As a kid I always had dreams of having a little RC garbage truck sort of thing and thinking how cool it would be to have a mini garbage truck
The fact that someone else clearly had this idea and had the practical skills to actually make it is great I hope you eventually make all sorts of different types of trucks maybe even a spak at some point who knows
Anyway keep it up this your work is legendary
Thanks mate!
This truck and all those 3d printed mini bins are so amazing!! If you ever are selling any trucks or bins i would love to buy one!!
Thanks mate!
I want one so bad, and I love the progress you have made with making the garbage trucks and creating your own 3d printed bins and I think you should start up a series of where you make your own mini collection service with garbage green waste and recycling with both of your trucks such as greens and garbage on week and recycle and garbage the next
Cheers mate! I was thinking of doing that - that would be awesome!
I think so to
Love the ideas
Maybe I can even sell some bins!
*you
Wow this model has come a long way since the last video 3 months ago. Love the attention to detail. Your 3D printed bins of the different sizes really have come together well. And the electronics on the grabber works very well. Love the attention to detail on truck too; puts my 3D printed models to shame. Keep up the great work, love the effort you have put into getting this video together. Well done.
Thanks so much mate! Definitely not mate -your models are awesome! Cheers!
That's dope AF
Im completly amazed by this everything is to detail. That 240 litre brickwood you made is on point
Well done mate this could potentially get huge if ypu mass produced them or even try to trademark it and show the big companies like bucher and iveco
Cheers mate! Glad you noticed the brickwood! That would be cool - it's the goal to get that eventually!
Awesome, looks really good, the new bins look amazing, arm, body, design are all perfect. Love the little details like the hazard sign, and the tail gate. Very good construction as well, can’t wait to see more!
Cheers mate - glad you like it!
@@TassieGarbo sure did! Keep up the good work
that is an amazing model. Super realistic and functions well!!
Thanks mate!
@@TassieGarbowhere are the mini bins from sorry i might of woke you up bc im in the uk as u can tell.
Can't wait to see the 80Ltrs get picked up 😮😊
I'll chuck a heap at the start of the next video for you mate - Cheers!
Thx 👍😊
Could you pls make it so the 80's can slip in the grabs pls 🙏
Im not a person whos interested in bin trucks, this just popped up in my recommended, but this is so cute dude! Keep going, looks amazing!
Thanks mate!
Great talent! I honestly thought it was a shop purchased truck since it looks so well made.
Thank you!
Pretty cool to see a realistic one with the motors to operate the arm! Love the build!
Thanks mate!
Omg I have a 5 year old whos obsessed with garage trucks and bins. He just came across this video ( yep he loves you tube.) And shouted I know what i want for my birthday mummy's. And shows me this video. ( mummy refuses to buy anymore garbage truck and recycling trucks but this is pretty cool) where can i buy one in tassie lol.
3 axel sounds good!
wow this is amazing dude tbe technology and design kind of reminds me of our first gear trucks here in america just much bigger and better
Thanks mate!
❤😂🎉🎉
❤❤❤❤❤❤❤❤❤
Excellent Design mate everything is detailed very well, it amazes me how you have managed to create such a sick craft. Great stuff man looking forward to seeing more videos with this build, keep up the great work 👏🏾 👌🏾.
Thanks mate!
I'd buy this off you mate, this is something I would have always wanted as a kid, hell I would play with it now!! Great work!! Subbed.
Thanks mate!
I like the Brickwood bins you have made. I'd be interested in buying a couple off you if you ever produce more. Cheers
Thanks mate! I reckon I will make a few to sell soon.
Sweet, let me know please@@TassieGarbo
@@VictorianGarbo Will do
Man this is most amazing model I have seen yet. I have always been so jealous about America being the only ones to make garbage truck models, for a long time I wanted something like this that actually has an arm on it fucking left side for once. Now I know Australia does models like locomotives and I myself have one in my possession of an steam locomotive, but in the back of my mind I just needed something like this. I like the detail you put into this one but if any sort of feedback would be from me is possibly adding more detail to the cab such as proportioning the grills, but your not at all far from it, in fact this is quite the spectacle you have built.
Cheers mate! Me too, I think it is about time we see more models with the arm on the left haha. Yeah I need to work on the cab, this cab is the one off of the old truck and I redid the steps and made a new grille but it really needs just a new cab from fresh I think! Cheers!
I love your work! so inspirational! Roman-
Thank you!
@@TassieGarbo I hope you will make more really cool videos like this!
Amazing video the trucks look insane I was wondering if I could buy one
Awesome mate, great to see another upload. This new truck looks great, love the detailing on the arm and the grabber, I'm sure that would've taken a lot of trial and error to get to where it is today. Love the new mini bins as well. Can't wait to see more uploads mate!! Cheers!
Cheers mate, bloody oath it did. I started working on this grabber/arm last November, and has taken so many tries to get it to look even close to a GenV setup. I use 'TinkerCAD', and have about 40 different files full of truck stuff haha. Cheers!
@@TassieGarboThats sick as mate. Completely unrelated, but I found a video that included an Aussie Waste Isuzu Raptor drive by and collection at 16:23
ruclips.net/video/OhCnf_iiRfQ/видео.htmlsi=n4VJMLEJV9I_7htx
First time I can properly appreciate them haha, also included a clip of 71059 in Derwent Valley Council and some of the JJs Buchers
That video is sick! So many undocumented areas and trucks. Those Aussie waste isuzus look good, got the newer different sigange on em too! Old mates got the dog along for the ride haha. And first footage in derwent valley! Blokes a legend if only comments were on
@@TassieGarbo yeah it was sick, love the clip of 59 looking mint, I used to have a clip of it somewhere shortly before it was sold, looked pretty rough. I remember that newer signage, theres a couple of bins in Kingston with Aussie Waste stickers on them with that logo. Haha yeah, I loved the more layed back energy of Aussie Waste, as little silly little rules as possible (which is what got them into trouble). I really want to get out to Derwent valley and see what they have running now, will try and do that over the holidays. Same, he needs to know how much iconic stuffs in that video. Cheers mate!
@@wasteintasmania nice mate! Cant wait to see what you get out that way, Ive been trying to get the thorp 07 acco but he hasnt been running it since I got it last time. Haha aussie waste drivera didnt even have to wear hi vis haha. Also have you noticed that the drivers dont wear seatbelts while operating? I had a read of road rules and garbos are exempt from heaps of stuff if collecti g rubbish and have a flashing/rotating amber light on. Cheers!
love it mate can not wait for recycling and then green waste should do a glass run like broken up bottles or somthing of course it would be heavy but mabye do a small bit in each bin idk just a idea
love it mate have a grate one
Cheers mate! Got a couple of bins ready full of steel bottle caps and other metallic objects, sounds good in the hopper. Your idea is great, will definitely do that! Cheers mate - you too!
I thoroughly love your attention to detail.
I have two questions:
• is it possible to slow the electronics down to give an even more realistic touch?
• Have you consider making and selling these as working models for those passionate about garbage trucks?
Cheers mate! Means a lot from you!
Yes, theoretically it should be. At the end of last year when I started making this truck one of the goals was to slow the arm down and increase the controllability, as this truck doesn't operate like a Bucher etc., as the joystick acts as a potentiometer to map the arm to a specific position rather than just up of down at a certain speed. Therefore the joystick has to be held in position to keep the arm halfway up. These motors are servo motors which are fairly weak and difficult to control, so I was going to use stepper motors which would allow the truck to be controlled like a Bucher etc. and would slow the arm speed, but I'm not very good at programming so I could not figure it out, however if I was to figure it out I think I would implement it to this truck.
I definatley want to, but they take a long time to make. I considered reducing features or making just the arm/body/subframe, but I'm not sure - but to answer your question at some point in the future hopefully.
Thanks for the comment mate - cheers!
Also, your video of the whithorse GenVs when they were new was very helpful when making the grabber. 😊
@@TassieGarbo My pleasure, you've done a fantastic job and deserve every bit of kudos for it.
Soon enough you'll be enjoying, using the real thing.
@@MegaDirtyHandscheers mate, hopefully!
I wanna see one of these compact a old minibin
This is so sick nice job
Thanks mate glad you like it!
Thats bad ass, i need one of these dude. Keep up the awesome work dude. You could make alot of money selling those
Thanks mate!
@@TassieGarbo no problem
I absolutely love this mini model and the bins are so accurate especially those brick woods id love to see this made available to all collectors that want and wish to buy a mini garbage truck or their own and those brickwood 240l I kinda want one would u be able to print a split bin brickwood 240l ? That would be epic anyway can’t wait to see more of this keep it up bro 😎
Cheers mate! I certainly could - I'll work on making one!
And maybe some trucks you can sale to!
This truck is so cool. I wosh I had one.
This is actually incredible. A proper RC garbage truck. I love how you’ve made it so well that it actually looks like a real manufactured model. Stellar work! If I may ask, what motors and method of control do you use? Again, absolutely insanely cool model. Great work. Awesome video!
Thanks mate! I used Arduino Unos and servo motors, and little joysticks for control. I will show the controls in the next video! Cheers!
WOW man, I have to hand it to you bro you are a very good builder I couldn’t do that or pay 30 bucks for those? Keep bringing these model videos coming
Thanks mate! For the mini bins you mean? Cheers!
Lovely video mate looks so good the model u did epic wondering if u can do a Hino in future thanks 😀
Cheers mate! I definitley can, want to do some other truck cabs in the future too!
@@TassieGarbo yeah and I know they will turn out to a big success 😀
awesome!
Thanks mate!
Wow mate this is very impressive! You’re very talented. Absolutely love the 3D printed mini bins, do you plan to print anymore? Would definitely love to buy some if I could. Cheers 👍🏼👍🏼
Bro plz make a turtorial of how to make one of how to make this and the supplies you need
Sorry I’m late. Anaways awesome like normal mate! Keep it up!
Thanks mate!
Btw did you some of the bins yourself? Bc you’ve done such an amazing job.
I did, I made all of the grey bins with black lids, and the green bins with black lids but not the 240l dark green/black lid bins.
awesome
Thanks mate!
Now you’ve done this, I’ve toyed with the idea to have a crack at making a JJRE sideloader, due my obsession with their massive older 35m units. I’ve thought about it being a lot easier to control the arm speed operation using linear actuators (more expensive than servos😬), however the amount of pivots/linkages in the setup of their lifters adds to the challenge. kinda hard to find the time for a hobby like this when you drive them for 50-60 hours a week. Love the work mate, it’s an absolute tease with the infrequent updates/videos on but it’s understandable with a work in progress. Wouldn’t happen to be able to share what 3d printer setup you’ve got going on?
Shit mate sorry it took me so long to reply! I've got a few new ideas and trucks in the works now. That's understandable mate - haha sorry! I've got an ender 3 s1 at the moment but it isn't working. I'm going to try and fix it but I don't think they are especially good. Thanks for the comment mate cheers!
The local waste stream gets wooden objects in it occasionally over here. The garbage truck doesn't care, it just compacts it all. What size and grade of wood do you reckon the compactor would safely handle? The real life compactor doesn't care what kind of wood it is, it just busts it apart with several thousand pounds of hydraulic pressure per square inch. Another thing we get a lot of in the waste streams here is styrofoam, the lightweight white molded variety that TV's and most electronic goods are packaged in. Would be interesting to see what scaled down diameter would fit in the hopper.
Cheers mate, I reckon this is about the limit of it haha, these motors are pretty weak when running at lower rpm like the packer one does. It would, I'll have to cut up some small bits of it!
@@TassieGarboWith motors for the purpose you're using them for, you need to look at what gives the best torque. More torque will mean better compaction. Scaled down to the model of course. 😀
Very nice Model and carts! Are u thinking of selling a trucks? And what would happend if a cart fell in and u dident take it out?
Thanks mate! Maybe, and the packer in this one isn't strong enough to crush the bins unfortunatley. I'd like to upgrade it in the future though.
Could you please put the 3D models of the bins online to download because they are so cool?
very cool truck. would you sell it for 5k dollars? very very keen
How are you powering this and what motors are you using? Been thinking of making a truck like this for a while now.
Servo motors, arduino unos and 6 volt batteries.
Fucking Awesome! I loved how the truck said "stinky" 😂 loved the unloading and the hopper footage. Is this truck based off a Thorp Waste truck? Cheers mate!
Cheers mate! Haha yeah, it will get to living up to its name pretty soon I think! Thorp Waste was definitely an inspiration for this truck and especially the two tone. Cheers!
where did you get it, I really want one.
he made it
Hi Tassie Garbo,
I am a psychologist who has a young client who is a huge fan of your channel. We were looking into 3D printing and were wondering if you were selling the models or the files of the models, specifically of the 140 L Mastec, 120 L Brickwood, 120 L Mastec and the 240 L Brickwood mini bins, and any other models of mini bins that you might have. I would love to be able to get in touch with you to talk about it further as my client is really passionate about bins. Hope to be able to get in touch soon :)
Send me an email 😊 I would love to send you some bins.
oehengineering@gmail.com
@@TassieGarbo Hello! Thank you so much for responding. My client is really excited to hear back from you. We just sent you an email. Hope to hear from you soon :)
Sup mate Love the trucks btw gl for 600 subs. btw will theses trucks be for sale
Sup Hayden
Cheers mate! Thank you - getting close now! And maybe, I need to make my process more efficient and make a few to sell.
@@Launceston_garbo1 sup mate
hey mate nice vid!
is there a chance u could make a gold coast jj richards truck?
I reckon mate, working on an spak bin grab now.
@@TassieGarbocool
Where can I get a mini binfrom?
You shoul sell the 3d printed minis
Can u make a bin fall in pls
Sure mate
are you thinking of making a spak?
Yeah mate working on bin grab now.
@@TassieGarbo that is great and would it be possible for me to buy a truck once you are done one i know you are not selling one yet but if you can it would be much appreciated
@@TheShoalhavenGarbo I reckon mate it would be a lot though like 1000
@@TassieGarbo oh ummmmm
Do you think you can make a tutorial video on how to make one so us you are not as smart as you can build one? @TassieGarbo
And how to make 3 bins plz bro plz
And to make the truck Js one truck pls
Great! If I give you my email, would you be able to send me the files for the mini bins if possible?
Cheers mate! Sure can, which style would you like?
@@TassieGarboAs many as you don’t mind sharing haha. Do you have Instagram? Would just rather not leave my email in a comments section 😂
hey mate if i had given u $200 would u be able to make me one of those trucks let me know
or 250
Hey mate, I have a 3D printer and I was wondering if you were able to send me the file to the brick wood bin as I wouldn’t mind printing one off. If you are fine to do that I will give you my email
Yeah mate of course, chuck us your email and I'll send through the STL for slicing to a gcode. Cheers.
Did you get the email address?
@@NSWGarbo47 sent.
That’s so cool! How did you get those mini brick woods they are awesome 😊
@@BaysideGarbo1234 Thanks mate! I 3D printed them.
do you have any sort of social media i’d love to have a chat with you this is so cool
Hey mate yeah I do, got Instagram or discord. Cheers.
theaustraliangarbologist*
instagram
Do you have discord or facebook or snap? Just want to ask you somthing