As being a welder for 30 years I am really happy to see the trade I put my life into going to some awesome young welders keep it up I am proud of what yall are doing there are some pretenders out there that can't weld a lick ...
Ahhhh my good friend, Travis... I’ve seen this guy in GRB where I work... I’ve seen him testing, practicing, and experimenting with welding... I’m proud to call him a good friend... he’s dedicated
You can learn a lot from Travis just from watching the years of his videos. I've watched and re-watched them over and over so many times I'm surprised they're not worn out 😏👍
The fact yall brought travis down..says alot. Super glad yall teamed up...travis a weld fanatic extremely precise, very good , and funny as hell 😂. Really stoked up yall did this vid. Thanks. RayWelds, Gonzales TX.
hahaha. I'd have to say this dudes quite a bit cooler than sheldon, so yeah I guess you could he is sheldon of welding. I think it's safe to say that welding is his life
That’s the best part too me not all of us are dumbass welders this guy is on the top of the food chain of pipe hands!!!!! I would love to work a job with this guy!!!!!
Totally awe-strucken! Didn't intend on watching the whole 40+ minutes but did! SouthCoast, hats off to you for your humbleness, you will be rewarded. Second, always knew Fieldres knew his shit, but damn! After watching this, it's obvious he's borderline genius, but he seems genuine. I used to watch his old vids and even followed on IG once, but then he seemed arrogant. I'm glad you had him on!
Travis, you should do more talking on your YT channel man, you're a very good teacher and I'm sure you would be even better when you're not trying to pack a lifetime of knowledge into one 40 min video. Thanks for info brother, very much appreciated.
Right hand and left hand welder papa! Nobody does this anymore brotha nice video its amazing the advantage people have in the field when you can weld with both hands. Awesome job bro.
Everytime i watch a welding video, i realize how much more knowledge and info there is to learn in the welding industry, & how ive only dabbled in my infancy stage as a intermittent hobby welder. Holy f#%k man! I never heard of him before, but looking at the comments below, in addition to watching the whole clip (that i wasnt prepared on doing, initially), it’s obvious that it’ll be best for me, if i absorb EVERYTHING this guy says about welding. Thanks for sharing this w/us, guys. One last thing - wtf is that sound at 30:17/18?! Camera man fartn around, literally?! Lol. Have a great day guys. Aloha
When i weld titanium I usually start at the bottom, move my torch left and right until i get to the top. oh and i use argon, and a trail cup if they ask me too.
He's probably a WET (welding engineering technology) student - we have that up here in Canada north of the wall. They usually start out as welders first.
Awesome video with the one and only FieldRes! I kept wondering why he kept mentioning "antifreeze", but then when they bought out the Heet, I was like oh, that's why he keeps calling it gasoline antifreeze......methanol alcohol!
Todo o soldador TIG sabe que existe óxidos mas limpeza com lixa manual deixa impurezas empreginadas. O mais indicado para limpeza são escovas tantos rotativo ou manual. Bom vídeo com uma equipe excelente. Parabéns! Já deixando o meu Like
He's using memory cloth first. It doesn't smear like a wire brush does. If you watch, he uses the memory cloth back and forth and the wire brush only one direction right after, then he wipes it down clean with a cloth.
good afternoon my Brothers, the here Aldo in from Brazil Paraná I like Very welding!,. I am welder in petróleo in Petrobrás Brazil. I watch all the videos on your Channel. very nice your esplication.
i weld titanium in 14 years and it's all field weld, tie in, 100% X-ray all passed> but i never used a trailer gas and it's still the same color you've got. all you gonna do is just maintained clean, clean, clean every time before you started weld that's simple!
Nice, when welding alloys I use nuts of the same materials instead of bridge taking. Would titanium nuts cause contamination even though it's going to be removed before filler wire is added?
TrAvis Field. You are something else. Brother it would be my pleasure to work with you. Too many "welders" and shop foreman today don't know, don't listen, and just plain don't care to take their time, do their homework. Study their metal, get to know their ,psycho" personality or whatever the case. I applaud you for doing it right brother. Great job I hope you burn n earn!!!
those professionals who weld a lot titanium (and other exotic steels) have a lot of fun with this film and the canadian welding master. the Canadian master still does not know how to make the correct tie-in and nice regular root.
Love your vids man I wish for your continued success. I was wondering if you ever going to make vids using simpler easier to puncture materials like 1x1 square pipes etc on how to fully fuse them together cause I got a client that is trying to get some handtrucks made from scratch using stick welding. Now I’ve only been welding for a couple of months and mostly used tougher material and I’ve been having problems with this even though in theory is such a simple task i will much appreciate it if you ever post a vid on that.
I am an Edmontonian working in the oilpatch but im an electrician/instrument mechanic...hes not kidding about the weather.. we got shut down once in peace river(shiver) at -53c(-63.4F)... think spitting and it bouncing because it freezes before it hits the ground. shit'll put hair on yor chest.
"...And if you already got hair on your chest, it'll migrate to your neck and back." 😂 Holy shit that's crazy cold. We get -30 C once in a while here here in Iowa, I can't fathom -50. Stay warm partner, winter is back again.
Dat is some specialty type skills.... And, this is a great tut video.... Too expensive to learn for now... But, great video non da less.... Big money with the Titanium ... Aircraft specialties...
👇WeldTube Store👇
www.weldlife.com
Hearing this guy talk and explain things is mind blowing! Much Respect!
As being a welder for 30 years I am really happy to see the trade I put my life into going to some awesome young welders keep it up I am proud of what yall are doing there are some pretenders out there that can't weld a lick ...
Awesome stuff right there! Anxiously awaiting the following vids you guys shot together.
Ahhhh my good friend, Travis... I’ve seen this guy in GRB where I work... I’ve seen him testing, practicing, and experimenting with welding... I’m proud to call him a good friend... he’s dedicated
You can learn a lot from Travis just from watching the years of his videos. I've watched and re-watched them over and over so many times I'm surprised they're not worn out 😏👍
Yeah Travis rocking the GRB shirt!!!...way to represent for us Alberta boys!!!
Who are the fools who give dislike in a video of these ??? Congratulations to all involved, one of the best contents on Internet welding.
@@XYZ-lw1gu your proof? Seems like your full of shit. Travis seems legit.
@@marsbase3729Did you even get the message? You´re full of shit
You´re as well one of my favorite welding teachers!
you have my respect!
@@osdanvillagrand5497 lol, I don't even what my comment was in response too
What dislikes? >:)
This video made me smile guys Dr Travis is the Einstein of welding...
And somebody's got a pretty good sense of humor keep up the great videos
The fact yall brought travis down..says alot.
Super glad yall teamed up...travis a weld fanatic extremely precise, very good , and funny as hell 😂.
Really stoked up yall did this vid.
Thanks.
RayWelds, Gonzales TX.
Never heard of this guy but damn hes got some knowledge. Pure natural on camera and how he teaches. Love it.
Travis is the man. Check out his stuff. He had some funny videos too but he took them.
He's got his own channel Fieldres and he is a badass
he is the Sheldon Cooper of welding, very informative😎😎😎
hahaha. I'd have to say this dudes quite a bit cooler than sheldon, so yeah I guess you could he is sheldon of welding. I think it's safe to say that welding is his life
That’s the best part too me not all of us are dumbass welders this guy is on the top of the food chain of pipe hands!!!!! I would love to work a job with this guy!!!!!
You can just tell Travis’ brain is going about 800mph, total legend... much respect from the uk
Weldtube and Fieldres who else liked the before watching !? 💯
Totally awe-strucken! Didn't intend on watching the whole 40+ minutes but did! SouthCoast, hats off to you for your humbleness, you will be rewarded. Second, always knew Fieldres knew his shit, but damn! After watching this, it's obvious he's borderline genius, but he seems genuine. I used to watch his old vids and even followed on IG once, but then he seemed arrogant. I'm glad you had him on!
WAAAAAY over my head brothers. I love your work!
Travis has been legend of welding for years! I always looked up to him.
Absolutely love Dr. Travis and all the Instructors of South Coast Welding Academy 😃
Travis, you should do more talking on your YT channel man, you're a very good teacher and I'm sure you would be even better when you're not trying to pack a lifetime of knowledge into one 40 min video. Thanks for info brother, very much appreciated.
Right hand and left hand welder papa! Nobody does this anymore brotha nice video its amazing the advantage people have in the field when you can weld with both hands. Awesome job bro.
Great video, this is one you save for later to refresh your memory
Awesome video, love all the info and science of it in the beginning!
Keep it up guys!
Best welding video on RUclips
Everytime i watch a welding video, i realize how much more knowledge and info there is to learn in the welding industry, & how ive only dabbled in my infancy stage as a intermittent hobby welder. Holy f#%k man! I never heard of him before, but looking at the comments below, in addition to watching the whole clip (that i wasnt prepared on doing, initially), it’s obvious that it’ll be best for me, if i absorb EVERYTHING this guy says about welding. Thanks for sharing this w/us, guys. One last thing - wtf is that sound at 30:17/18?! Camera man fartn around, literally?! Lol. Have a great day guys. Aloha
In depth and motivational. Thanks for sharing the wealth of knowledge.
Damn y’all brought out the welding scientists
Fantastic video guys. Well done Travis. Some fantastic knowledge and skills.
I love your products HUNTINGDON FUSION.Using more than 10years.AWESOME
Golden Arm Weld Doc! Love it!
Don't worry, Travis makes us all look bad and we thank him for SHARING his considerable experience . Thanks all.
I gotta take this test In a couple days. Thank you for the video.
For welders like us its interesting..GOOD JOB SIR TRAVIS FIELD...
Hey dude you got skills... Greetings from Azerbaijan
Right on Travis!!! You have the man on there now!
When i weld titanium I usually start at the bottom, move my torch left and right until i get to the top. oh and i use argon, and a trail cup if they ask me too.
Holy... this info is out of my pay rate
Jes Us glad I’m not the only one
He's probably a WET (welding engineering technology) student - we have that up here in Canada north of the wall. They usually start out as welders first.
Awesome video with the one and only FieldRes! I kept wondering why he kept mentioning "antifreeze", but then when they bought out the Heet, I was like oh, that's why he keeps calling it gasoline antifreeze......methanol alcohol!
Super boring to normal people, unbelievably interesting to all us welders lol
fuck yea its like porn to us lol
@@xchrispykilla21 yeah I just get a nice pipe with some real nice welds and bang it all night long
Howzit buddy?
those professionals who weld a lot titanium (and other exotic steels) have a lot of fun with this film and the canadian welding master.
Worlds best all round welder????
Travis Field the GOAT
This is a infomercial for GRB college of welding. I was so intrigued by the information in the video that I’ve looked into the school
Todo o soldador TIG sabe que existe óxidos mas limpeza com lixa manual deixa impurezas empreginadas. O mais indicado para limpeza são escovas tantos rotativo ou manual.
Bom vídeo com uma equipe excelente.
Parabéns!
Já deixando o meu Like
36:33 He's smearing it. Probably not a huge deal but if you're not supposed to brush back and forth doesn't the same apply with emery cloth?
He's using memory cloth first. It doesn't smear like a wire brush does. If you watch, he uses the memory cloth back and forth and the wire brush only one direction right after, then he wipes it down clean with a cloth.
Great video. Learned a lot. Thanks
The metallurgy of titanium is insane
good afternoon my Brothers, the here Aldo in from Brazil Paraná I like Very welding!,. I am welder in petróleo in Petrobrás Brazil. I watch all the videos on your Channel. very nice your esplication.
Very informative video. Great knowledge
i never thought id take advice from a guy with a tongue ring.
Advice on what? welding or.........
very good info, I didn't know a lot of this stuff ,,thanks for the video..
great skit....well done....
i weld titanium in 14 years and it's all field weld, tie in, 100% X-ray all passed> but i never used a trailer gas and it's still the same color you've got. all you gonna do is just maintained clean, clean, clean every time before you started weld that's simple!
How is welding work there and how many salary getting for Tig mig arc welder with 10 years experience X-ray welder
Wow smart dude good video much respect
Yall are too cool! 😎👨🏽🏭
Hats off to you all, that man is a genius!
Great info thanks guys
Nice, when welding alloys I use nuts of the same materials instead of bridge taking. Would titanium nuts cause contamination even though it's going to be removed before filler wire is added?
this was very impressive
He’s so good I don’t think I’ll even watch him. I never even touch titanium let alone weld it.
Thank you sir, you are great
I’ve used stainless rods off the ground the weld turned out fine lol
His no hood bead video was a classic. Stay safe brothers.
TrAvis Field. You are something else. Brother it would be my pleasure to work with you. Too many "welders" and shop foreman today don't know, don't listen, and just plain don't care to take their time, do their homework. Study their metal, get to know their ,psycho" personality or whatever the case. I applaud you for doing it right brother. Great job I hope you burn n earn!!!
AWESOME video man. I wanna be this guys helper. I love learning new shit.
Skilled shark. Makes me wanna go and turn my Lincoln on and start burning...good looking out SouthCoast y’all are badAss bro.
What kind of filler was used for the titanium and is there a certain mix of gas needed
This is so badass!!!
How do you keep your feeding wire hand still?? I move soo much and I feel like that’s the only thing hold me back from making a good weld, please help
Travis you're the best thank nfld
Please tell the titanium grade and filler metal used ?
I couldn’t quite see what amp range he was in. I know with the pedal it doesn’t tell the whole story but I like to know these things.
So, rather than thinner, you're using anti-freeze as a degreaser?
Yellow heet is methanol, red heet is isopropyl
How hot\temp was he running for this
WHERE DO I GET ONE OF THOSE HOODS
When you realize you’ve been using your brush wrong all along 😐😂
those professionals who weld a lot titanium (and other exotic steels) have a lot of fun with this film and the canadian welding master. the Canadian master still does not know how to make the correct tie-in and nice regular root.
Travis big fan! Whats a good welding book with all this info?
Great stuff Learn something new today
Anyone know where he went to college and who was in charge at said college?
Love your vids man I wish for your continued success. I was wondering if you ever going to make vids using simpler easier to puncture materials like 1x1 square pipes etc on how to fully fuse them together cause I got a client that is trying to get some handtrucks made from scratch using stick welding. Now I’ve only been welding for a couple of months and mostly used tougher material and I’ve been having problems with this even though in theory is such a simple task i will much appreciate it if you ever post a vid on that.
Didn't realize that the oils from the gloves could containment the filler. Will put that in the brain library
Wanted to ask whay sheild is that thanks
Soo good 😍
Can u plzz explain the purging arrangement
Very good stuff I wish I would want to this school
I am an Edmontonian working in the oilpatch but im an electrician/instrument mechanic...hes not kidding about the weather.. we got shut down once in peace river(shiver) at -53c(-63.4F)... think spitting and it bouncing because it freezes before it hits the ground. shit'll put hair on yor chest.
"...And if you already got hair on your chest, it'll migrate to your neck and back." 😂 Holy shit that's crazy cold. We get -30 C once in a while here here in Iowa, I can't fathom -50. Stay warm partner, winter is back again.
Awesome! 😄
Fuck yeah way to have Canada represent! Multi process welder here in Manitoba and Ontario. Alberta produces some crazy talented welders.
Great Info
Plenty of precious information till Friday then
Super smart that guy is.
Where your school at and how much you charge
Gotta love Canada and the great Canadians! Texas away from Texas...
*Minus Justin Trudeau of course!*
U need to make a video with trey from Alabama pipe welding academy
Ayyy 🇨🇦 from Toronto but went to SAIT in Calgary
ACC baby
First arc strike at 32 minutes!
Which welding school did he go to again? I think I missed it 🤣
Dat is some specialty type skills.... And, this is a great tut video.... Too expensive to learn for now... But, great video non da less.... Big money with the Titanium ... Aircraft specialties...
What size gap on the fit up
mhudson631 it was 1/8
The guy is a god
Did you do your hexchrome assessment?
Well I be damned! Travis Field in the H?! You definatley have to get him a wing dinner from Timmy Chans before he goes back to Cananda!!
Expertos estos soldadores pero me quede enamorado de las caretas alguien sabe donde puedo conseguir una
WeldTube thank you
Encounter titanium already but was just ah plug en a vessel very tricky weld a lot off metrology