Got a 2021 GMC Canyon I called and purchased the blade light bar and the recommended harness for my truck. Got it all setup yesterday very simple and it looks amazing!
Is the blade driver box able to be disconnected to feed wiring through? I have a rollpan instead of a bumper, not sure how I could route the wiring if the driver box is not removable (I would reinstall it obviously)
I just ordered the Putco blade 92009-60 60" light bar and Putco 529004 - Blade Connect Harness. The light bar has the white wire but I do not have the last red wire. Am I missing something? Any help would be appreciated. 2017 Sierra
My light bar is lighting up but flashing red anytime my signals go on. When in reverse, it flashes white...I called Putco today, and they said I need to buy a whole new set ?
@Putco I have. They all seem ok. When I called customer service, they said it could possibly be a bad box, but there's nothing that can be done. I don't understand how it's working sometimes but not properly
Hello, we are sad to hear you are having an issue with your lightbar. Please email support@putco.com and the support team will find a solution for you.
This installation is fairly similar on the Ridgeline as the plug and play harness is the exact same. You aren't able to fit a full 60 in blade however.
I see the Putco BLADE LED Light bar is .375" tall; my '08 Tundra tailgate gap is .5"; since I do not want a permanent install, I would like to use the standoff clips; however, with the adhesive strip > standoff > light bar, will I exceed .5" and crush the lights when the tailgate is down? I'm unable to find the dimensions with this setup to verify fitment--any insight would be greatly appreciated.
I cannot find the wiring harnesses as pictured in the instructions for the 529005 wiring harness, which is needed for the 2019 models. I see a wiring block on the driver side which I am still not completely confident on which wire is needing to be removed. On the passenger side, I think its saying that it is located between the bumper and exhaust. Nothing there. Anyone have any idea where this harness plugs in? I think the instructions are for the 2020 model, which could have greatly changed.
Hello... I have seen a Led Taillight Bar that has a " Solid Amber " all the way across , while Driving, as well as the Red Brake Lights, and Turn Signals Flowing... Does Anybody Know What Name Brand , and Model Light bar that would Be...? Please Answer Back Here. Thank You in Advance, BillinL.A 5/6/22.
I have a OBT7 Redline Triple LED Tailgate light bar Installed on my 2022 Tundra 1794. Everything worked great. No codes/errors on Dash. Then, I noticed on one of my cameras that when backing up and then stopping and then go forward from Braking that the whole light bar flashed Yellow. Sometimes it even does it when moving forward from stop. Has anyone experience that or can check their OBT7 lightbars
We hear this a lot actually, get the ultimate updrade for a direct fit/installation of your 22 Tundra 1794!, guaranteed satisfaction.... @ www.putco.com/product/blade-tailgate-light-bar-plug-n-play/v/Toyota/Tundra/2022/
Just received the Putco Blade 92009-48" light bar said its compatible with my 2021 GMC Canyon...is it? Also, would the Quick Connect harness I need be # HD-529005?
Unfortunately with the way that Ford decided to do their tail light system it is not. You would have to splice wires if you were to use this setup. We have a plug and play solution for the F150 but it is a different part number. Please find our site linked below and all you should need to do is add in your info to get the correct part number. www.putco.com/bladedirectfikits
J Fike I have a 2019 Sierra 1500. You need a putco harness that plugs into the rear tail light plugs under the back of the truck if you get that harness there will be no hardwiring and the light bar works flawlessly. I just installed it two weeks back
We offer a harness for nearly every truck, for this particular harness it depends on the model. For anything Non-Ford and 2018+ GM, the answer is YES! For 2015+ Ford and 2018+ GMC/Chevy we recommend ordering one of our Blade Plug & Play Kits as harnesses do vary by vehicle model within the Ford and GM family.
Got a 2021 GMC Canyon I called and purchased the blade light bar and the recommended harness for my truck. Got it all setup yesterday very simple and it looks amazing!
Very glad to hear it! Feel free to tag us in any pics or dm us on social media, we would love to see it!
@@PutcoInc will do today!
Just what I was looking for
Thank you for choosing Putco!
Wish the underside was that clean on my truck 😳😳😳😏
Is the blade driver box able to be disconnected to feed wiring through? I have a rollpan instead of a bumper, not sure how I could route the wiring if the driver box is not removable (I would reinstall it obviously)
Yes, it comes with a quick disconnect wires for easy installation!
I just ordered the Putco blade 92009-60 60" light bar and Putco 529004 - Blade Connect Harness. The light bar has the white wire but I do not have the last red wire. Am I missing something? Any help would be appreciated. 2017 Sierra
Hello Samuel, do not worry about that RED wire on the harness, it is a constant 12V power source but does not need to be pluged-in into the blade.
Putco thanks. I was just worried as my light bar just had the 4 Pin and White wire.
Putco 529004
My light bar is lighting up but flashing red anytime my signals go on. When in reverse, it flashes white...I called Putco today, and they said I need to buy a whole new set ?
Hello John, have you checked all your Connections?
the only reason we would not cover it under warranty is if you are outside of the 3 year warranty.
@Putco I have. They all seem ok. When I called customer service, they said it could possibly be a bad box, but there's nothing that can be done.
I don't understand how it's working sometimes but not properly
@@eclipsespyder9805 please submit a warranty request, even if outside of warranty we can still assist you
@@PutcoInc ok. It says take a picture of the proof of purchase and the issue/defective. How do I take a picture of the light not flashing properly?
I purchased the Putco Tailgate bar and had it intalled on my 2020 Silverado. The right side of the bar has stop lighting up. What can be the problem?
Hello, we are sad to hear you are having an issue with your lightbar. Please email support@putco.com and the support team will find a solution for you.
Love to see you install the bar on a 2021 Ridgeline
This installation is fairly similar on the Ridgeline as the plug and play harness is the exact same. You aren't able to fit a full 60 in blade however.
Do you make a connector to fit a 16 Colorado for the putco 48" light bar?
They have one just call them. That’s what I did they hooked me right up. Just fyi
Thank you for choosing Putco!
Nice! Is the install/plug and play connect the same on 2022 Silverado 2500HD?
It should be very similar, if you have any questions feel free to give us a call at 800-247-3974
I see the Putco BLADE LED Light bar is .375" tall; my '08 Tundra tailgate gap is .5"; since I do not want a permanent install, I would like to use the standoff clips; however, with the adhesive strip > standoff > light bar, will I exceed .5" and crush the lights when the tailgate is down? I'm unable to find the dimensions with this setup to verify fitment--any insight would be greatly appreciated.
I cannot find the wiring harnesses as pictured in the instructions for the 529005 wiring harness, which is needed for the 2019 models. I see a wiring block on the driver side which I am still not completely confident on which wire is needing to be removed. On the passenger side, I think its saying that it is located between the bumper and exhaust. Nothing there. Anyone have any idea where this harness plugs in? I think the instructions are for the 2020 model, which could have greatly changed.
Is the harness needed for a 2016 silverado
Yes, this harness will work on your silverado www.putco.com/product/blade-quick-connect-harness/529004/
Hello... I have seen a Led Taillight Bar that has a " Solid Amber " all the way across , while Driving, as well as the Red Brake Lights, and Turn Signals Flowing...
Does Anybody Know What Name Brand , and Model Light bar that would Be...?
Please Answer Back Here.
Thank You in Advance, BillinL.A 5/6/22.
Brand NEW this month! We now have a Fully Sequential LED tailgate Light bar. check it out! www.putco.com/product/freedom-blade/
I have a 21 Ram Rebel with every option available. Would this video be the same for my truck???Thanks and keep these great vids coming....Helloooo
Yes it would be, did you get one yet? @ www.putco.com/product/blade-tailgate-light-bar-plug-n-play/v/Dodge/Ram%201500/2021/
I have a OBT7 Redline Triple LED Tailgate light bar Installed on my 2022 Tundra 1794. Everything worked great. No codes/errors on Dash. Then, I noticed on one of my cameras that when backing up and then stopping and then go forward from Braking that the whole light bar flashed Yellow. Sometimes it even does it when moving forward from stop. Has anyone experience that or can check their OBT7 lightbars
We hear this a lot actually, get the ultimate updrade for a direct fit/installation of your 22 Tundra 1794!, guaranteed satisfaction.... @ www.putco.com/product/blade-tailgate-light-bar-plug-n-play/v/Toyota/Tundra/2022/
The light bar comes with the white wire not plug & play. How do you get the black end cap on to make it plug and play?
please take 15seconds and read the description.... part # 529005 thats a harness that part is not in box you must order it extra!
Just received the Putco Blade 92009-48" light bar said its compatible with my 2021 GMC Canyon...is it? Also, would the Quick Connect harness I need be # HD-529005?
Yes.
Hey all of this should be the same on a 2021 f150 correct?
Unfortunately with the way that Ford decided to do their tail light system it is not. You would have to splice wires if you were to use this setup. We have a plug and play solution for the F150 but it is a different part number. Please find our site linked below and all you should need to do is add in your info to get the correct part number.
www.putco.com/bladedirectfikits
whats the part number for the lightbar with the 2 quick connects for the reverse light that is supposed to plug into this harness?
Putco 529004 Blade Quick Connect Harness
The harness where this link came from DOESNT LOOK LIKE THAT!
Thanks
I have a 2019 ram 2500 have quick connect and can’t get reverse? Wtf this is crazy
There is a white wire with a black plug that is the wire for the reverse light. we hope this helps!
this disables the safety sensors. isn't there a better way
what do you mean disables? and what safety sensors? and what model/ year vehicle?
J Fike I have a 2019 Sierra 1500. You need a putco harness that plugs into the rear tail light plugs under the back of the truck if you get that harness there will be no hardwiring and the light bar works flawlessly. I just installed it two weeks back
Rich Kesteloot does anyone make a plug and play harness that directly connects into the a tail light harness ?
@@Fliptheswitch. Yes, we have a plug & play harness available for your truck. > www.putco.com/529005
Putco have this harness for a 2020 ram 1500 rebel ?
Does this quick connector avoid the “trailer connected,disconnected warnings people get and anything to do with the blind spot detection system.
We offer a harness for nearly every truck, for this particular harness it depends on the model. For anything Non-Ford and 2018+ GM, the answer is YES! For 2015+ Ford and 2018+ GMC/Chevy we recommend ordering one of our Blade Plug & Play Kits as harnesses do vary by vehicle model within the Ford and GM family.