I believe this is very old instruction manual for installing Casoline MF ceiling. As I have noticed first MF7 main bar was even more than 1200 from the wall. Especially when you are trying to fix 2 skins on the ceiling… if MF ceiling starting to fall, it falls as a full ceiling and videos which I seen are very dangerous… could lead to a death ☠️ Regarding boards direction - must be cross fix to MF5, and not along the top hats (MF5) I can see that video done a while ago and as you aware drywall specs and details evaluate every year, a lot of specs which were using years ago - not accepted any more due to different reasons. 👌
Not the worst I've ever seen. But.... 1. 600mm is too far between fixings on your mf6a 2. Fix your mf7 to the wall or to the trim. 3. You need to properly level your mf7. Using your hangers as a guide will almost never work. 4. If this is in your home, I'd recommend using the tek screws rather than mf9 clips to secure the mf5 to the mf7. It's nothing structural, just that the clips can creak if theres slight movement or air conditioning in the house. 5. Always use 2 screws when fixing mf7 to hangers. 6. Always stagger your joints on mf7 & mf5. Never have them all in a line. 7. Boards always run across the mf5, never with it. 8. Never start with a cut board. Put a full sheet up, away from the wall, at a perfect 90° to the mf7.
Yes it can provide good sound proofing if you use double plaster board together or sound proof plaster board. Please fill the gap with sound proof filler. On the floor please use thin sound proof mat under carpet. Hopefully it will pass the soundproof test.
The boards should run opposite way to the metal which he does not do on both layers.the boards tend to bow inbetween the studs doing it the way he has.
I believe this is very old instruction manual for installing Casoline MF ceiling.
As I have noticed first MF7 main bar was even more than 1200 from the wall.
Especially when you are trying to fix 2 skins on the ceiling… if MF ceiling starting to fall, it falls as a full ceiling and videos which I seen are very dangerous… could lead to a death ☠️
Regarding boards direction - must be cross fix to MF5, and not along the top hats (MF5)
I can see that video done a while ago and as you aware drywall specs and details evaluate every year, a lot of specs which were using years ago - not accepted any more due to different reasons. 👌
Just 4 hangers for +/- 15 square meters? Is it enough?
come here to the Philippines... to know how to install different type of ceiling...pinoy is most talented among other..
Not the worst I've ever seen.
But....
1. 600mm is too far between fixings on your mf6a
2. Fix your mf7 to the wall or to the trim.
3. You need to properly level your mf7. Using your hangers as a guide will almost never work.
4. If this is in your home, I'd recommend using the tek screws rather than mf9 clips to secure the mf5 to the mf7. It's nothing structural, just that the clips can creak if theres slight movement or air conditioning in the house.
5. Always use 2 screws when fixing mf7 to hangers.
6. Always stagger your joints on mf7 & mf5. Never have them all in a line.
7. Boards always run across the mf5, never with it.
8. Never start with a cut board. Put a full sheet up, away from the wall, at a perfect 90° to the mf7.
Would have given you two thumbs up - thanks
Isn't the mf7 supposed tb running in the middle of the board to reduce the chance of cracking
Wow good job 🙏😁😷👌
Excellent informative video cheers
A really useful guide to get me going. Thanks.
Pro tip : watch movies on Flixzone. Been using it for watching loads of movies during the lockdown.
@Nathan Emiliano Yea, been using flixzone} for since november myself :)
@@nathanemiliano6209 who talk here about movies?
I know this isn't the thing to take from this video but what's the background track?
Do MF ceilings like this need ventilation?
Wouldn't you board the opposite way to the mf5 as you would with a joist
I've seen anyone board a ceiling the way they have
Hello dear,
Your vedio was very helpfull.
Im planing to make my ceiling modification. Kindly let me know how we can fix mounting to concreet slab
Buddhika Dinesh 98
Use no more nails, it’s basically really strong glue, it should be fine
Boa tarde lindo trabalho
Thanks for the video
What is the minimum distance from the ceiling that can be applied to the sheet
phil can you help us with a ceiling system for and led project using fluted baord
good method
great instructional video!!
Very low ceiling there.
😂😂😂
Good
Wonderful
Some segments in the video are stamped not adjacent to each other
How can i plaster the carport? I should build the stud metal first or...anyone gives me the solution, please.
Does this type of ceiling system provide good sound proofing for both airborne and impact sound transmission?
Yes it can provide good sound proofing if you use double plaster board together or sound proof plaster board. Please fill the gap with sound proof filler. On the floor please use thin sound proof mat under carpet. Hopefully it will pass the soundproof test.
@@mansoorhaq5837you can also get hangers with a rubber casket that can reduce sound and vibration transfer
really , i learn somthing special... for leveling we can use laser which is easy and right method ....
966969
6999699
9669
966
9696969y969
Nice
The boards should run opposite way to the metal which he does not do on both layers.the boards tend to bow inbetween the studs doing it the way he has.
Paul Edbrook and the other ummmmmmmmmmmmmmmmm I don't know how much you love me 😳😳😳😳😳😳😳😳😳😳😳
Ye but had to scroll down comments before this was pointed out
nice work
thank you alot
we have ceiling gun to do it convwniently
need proper names of the board an other stuffs like the tape that use to ceil of this joints an the plaster mix
height of that room deserving laugh
for demo purpose only?
hehe
Jyotirmoy Chamuah
it's a room for ants... or over grown umpa lumpas
Its for hobbits youuu.. fool*
Can i also work at your company.
I want job 10years experience
👍👍👍
This is wrong u boarded it the wrong way round.
Paul Edbrook why it's wrong??
The boards are supposed to go the other way lol
Boss, why so serious 😀
Mf7 exstention, why put it on other side of channel just put it over one and nother,... 4.23 time
my advise go in Germany and learn how it's easy and faster to instal MF.. or I can show you but with Germany MF not with that
I think this guy is 7 foot high
MF = metal frame
metal furring
www.british-gypsum.com/white-book-system-selector/systems-overview/floors-and-ceilings/casoline-mf
مرحبا اريد ان اتعلم انا من سوريا لا جئ في تركيا
Hi
حلو
Md eslam
رؤؤؤعه
too much MF MF MF MF Can you give names please.
:D
why this stupid method? is gyproc not beter to do it?