Here are the tools Adam is discussing: Proxxon Rotary Tool with AC Adapter: amzn.to/2z9SIF5 Proxxon Rotary Tool with US plug: amzn.to/3bpDGtl Disclaimer: Tested may earn an affiliate commission when you buy through the links here.
I´m using the almost very same tool for now more than 35 years! Not on a daily base anymore like the first years, but frequently. It is still the same tool, and Power converter. Proxxon is one of the top tool companies over here in Germany, and while it is on a lot of areas not the single "best company" but sharing with 2-3 competitors, you can hardly make any mistakes if you buy a new tool, and decide for a Proxxon!
I very much appreciated the guy at the hardware store talking me out of getting the battery operated more expensive Dremel for the much cheaper plug-in model that actually has a slight torque advantage. God bless his soul.
my mother got me the battery dremel years ago when I was in school. Its great that I can take it far away from power, but I cannot tell you how often I run out of battery
I have the battery powered dremel combined with their electric screwdriver, both at the same shared charging station. They are maybe 8 + years old and still going, although the charge isn't lasting long these days, likely the bats are going. Still, they are my go to tools. Maybe the Proxxon will be their replacement.
@JKSSubstandard I love the idea of being able to walk away from a power source in theory, but it took a DeWalt driver for me to become a true believer that a battery can deliver real torque. I think one of the weirdest things to get used to is that a Dremel doesn't really have as much to do with torque, but rather speed, but it still kind of benefits from being plugged into AC power.
No way. I was looking at Rotary tools, stumbled upon one I'd never heard before, tried finding reviews, AND ADAM FRIGGEN SAVAGE USES THEM. That's all the review I need for me to consider them
Hey Adam, I recently found a pair of pliers that blew me away. They are Neji-saurus screw pliers. They have these neat notches that are designed to bite into stripped screws. They have pulled more stripped screws for me in the past few months than I was ever able to pull with a screw extractor kit.
I follow a miniature modelling RUclipsr called black magic craft who sings the praises of proxxon's hot wire cutter when working with foam. There's actually a lot of overlap with the kinds of things Adam does in his one day builds.
I've always used Proxxon tools, when I finally got to handle a Dremel , after years and years of seeing it referred as the go-to tool the first time I came across a Dremel I picked it up and the reaction was "ewww... really?" The Proxxon's I've had never broke or failed, and with the collet system the precision of the spindle is fantastic, highly recommended.
I had the same reaction, the proxxons just feel better and I much prefer the speed control. I've also found I accidentally nudge the speed control on dremels way more
Agreed. Have had Dremels (mid to high-level models), even with proper chucks. Inherited an entry-level Proxxon with a simple drill press stand, waaay better feel to it! Now my go-to kit! All the older model-makers use Proxxon, they have been around for ages...
Workhorse vs Showhorse. Dremel has name recognition with people that don't actually know better, while only people who know their shit have heard of Proxxon.
I'd love to talk a little about this comparison. I specifically work on fiberglass boats. I've used and abused dremmels for a long time as a go-to material removal tool. I truly abused the tool though because of its dual use for me, in which I use it for course material removal with pressure for 20 minutes straight, pulling in fiberglass dust, exhausting into my hand because I always choke up on the tool. But then I run into a detail on the boat that demands the precision that put a rotary tool in my hand in the first place. I've been told I ought to be using a pneumatic die grinder, which I think is true for the course work, but I'd like to retain the precision and feel of the rotary when I get to the details. So. I killed my dremmel. Good and dead. I need to replace it. This Proxxon is really appealing to me, but I'm going to end up doing heavy course work with the tool. Most people I've seen singing praises put 90% of their use on their tool in fine work, and while I do need precision and indulge in the art of taking off an almost invisible layer by feel, 90% of my use time will be trying to maximize removal rate. I don't want to do a disservice to a good tool using it for the wrong thing, but if you have evidence that my workload won't hurt the tool, I want it.
It's a German company. German quality. In europe (or Sweden where I live) Proxxon is commonly seen as the Pro-level tool where Dremel is more commercially available.
@@didgitalpunk german quality is a fact. That is because there are a lot more Industry standards on how to label and test a product (DIN). Therefore, the competition is harder because you can better compare brands. If you buy an expensive german tool, you will get great performance.
You should really take a look at Proxxon's Pen Sander as well. I've been using one for years to clean up small 3d prints. I've 3d printed new tips for it, and just use double sided foam tape for attaching any sandpaper to the tips. It is seriously one of my favorite tools I've ever purchased.
Good day , I am a dental technician and rotary tools are a main stay of our industry. I have looked and purchased endless rotary tools in my life and to be honest. The ones made for dental tech are the bast and most efficient to use. Thankfully you can get the same models in other industries like nail techs. I believe as a maker that moves rather quickly you will LOVE the quarter turn quick chucks of many dental tools. The small micro motors these days are pretty much as powerful or more powerful that the Fordomes to the point that we've packed all of them away even tho they still function. Aslo the variable speed foot control will change your life just as much as the foot control on a tig welder. ...Look for a model around 35k-45k rpm..the digital (pwm) drives have more constant torque but its not a necessity...Hope this advice helps. Keep up the amazing work and stay safe during this pandemic.
I'm new to Dremels, but this thing has been great. ruclips.net/user/postUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR The variable speed is awesome and the cordless aspect makes it so easy to work with. I am constantly finding uses for it that make tasks easier. Recently I put in a new deadbolt on one of our doors. I knew I had to enlarge the hold where the deadbolt goes into the door frame. At first I thought I would have to get a big router and figure out how to use it for that, but then I rermembered we have the dremel. I was able to enlarge the hole almost as easy as if I was drawing with a pen. It's also great for grinding our dog's nails done and so many other household tasks.
I always watch all kind of diy videos and it surprises me how nobody ever think of dental supply kind of rotary tools, they are really precise and not to expensive if you only get the hand piece and you get it working with a universal laptop charger.
Been using the same Proxxon TBM220 pillar drill for the last 8 years at work to drill 0.25m holes under microscope, works perfectly, no run-out or slop in the quill, it's also been used almost daily for drilling sub 2mm holes in titanium and the belts don't slip.
@@SegginsProductions proxxon is a German company, but I guess their factory is based in Poland... though my EF & transformer has a Luxembourg sticker on it! 🧐
This video came out on my birthday! I think you actually wished me a happy birthday on a Q&A stream you did this same day but it feels like a lifetime ago now. I use rotary tools daily, I have one older dremel I picked up from a flea market thats got three speeds: High, Low, and Off, which lives in my leatherwork toolbox and is all I need for things like sanding or burnishing seams and drilling the odd hole in a piece of antler or through particularly thick joints. I have a radio shack branded one from an old roommate with five settings plus intermediate settings between those that I keep as my backup tool and my dremel 4000 which gets constant use. ive taken it apart to blow out dust and replace bearings and brushes several times and its been going strong the better part of a decade. But over quarantine ive discovered a love and talent for carving and engraving bone, and a dremel is just too heavy and bulky for that sort of work, and the flexible attachment while handy isnt the kind of long term solution I need as speed cant be controlled at the handpiece side in that configuration. Im considering springing for one of these as it looks like the ideal form factor for what I need with the quality of life concessions the dremel has been lacking. I love seeing the tools youd never come across on your own but suddenly someone pulls out the exact thing you need and suddenly your life changes dramatically, even if it is a video thats been out for a while, i decided to rewatch it to see this tool in action.
I've been using this tool for more than a year now. I'm really happy with it. The chuck lets you use quite a lot of different tools such as cutting discs, engraving tips, drills etc. . The nice thing is, their 12V product line is quite diverse and all of them work with the same transformer. As a architecture student, I build models on a daily basis and using this has helped me a lot. I always thought that Dremel was the better and more reliable brand, but the prices for Proxxon tools are much lower than for Dremel here in Germany (the Brand is German but the products are made in eastern EU countries for a long time now). The tool + the adapter might be too much for someone looking just for a single tool but if you need other things like the pen sander or Styrofoam cutter, the savings add up quickly. It's much quieter than my older Dremel back at home, lacks the torque of a Dremel but still... The flexible cord and how light it is are just enough to sell this thing.
@mrrobotoboto Hi. Is the Proxxon a standard 1/8” chuck shank, like the Dremel? Also, does the Proxxon accept ALL types of Dremel sized bits? I have all sorts of Dremel and knockoff bits. Would be great to use them in a Proxxon. Thank you.
I´ve owned a Proxxon socket wrench set for over twenty years now. It´s still in perfect shape, and I´ve been working on cars, motorbikes and all that stuff with It. In the Netherlands (where I live) Proxxon is an A+ brand, not available in the regular hardware stores. I can recommend It... Stay safe.
I've had Proxxon tools for 15 years or so bought them for an in house architectural modelshop I ran ..Solid German make, I have the TSG250 disk sander , The Proxxon Micromot FET table saw and literall was gifted the PS13 Pen sander this week as a belated birthday gift. I did have the KGS80 chop saw but sold it as I didnt use it much. Pricely tools but can highly recommend them.
Got an amazon card for Christmas... I literally never use amazon, so I bought one of these. I've spent plenty of time using my parents Dremel from the 90s to know I don't want to anymore... needless to say, I'm stoked!
I also have a Dremel 300 for more than 15 years now and it's like a leatherman super tool , not the best tool in the world but it does everything you can possible need well enough. One trick I have learned is if you have to use the little abrasive discs to cut something rather use a pneumatic pencil grinder, it does not snap the discs that easily. And use the thinnest disc possible to speed up the cutting process.
I am really loving the shorter videos! These are perfect for the million places during my day where I have 5 minutes where I'm waiting for my computer to finish doing something.
4 года назад+2
My dad has been using one of these Proxxon drills for high precision woodworking for years and years. Except for a fault in the cable, it's been working great.
Hey Adam, the Proxxon hot wire foam cutter is a staple in the tabletop terrain building scene. It's an absolutely fantastic hot wire table. The only limitation is the 6" throat and a rip-fence that tends to wander. However, after making a very simple yet very effective custom fence plus the addition of a foot-pedal switch, it's an absolute dream to work with for cutting foam. You can even cut some of the lower temp thermoplastics on it if you're careful.
Lightweight precision rotaries are EVERYTHING. For small, detailed work that doesn’t require a lot of horsepower, I use the Dremel Stylo. Still has plenty of zip but it’s small, lightweight and easy to manipulate. It’s made life *so much easier* for certain things
I looked up their site, Proxxon was founded in Germany and they make things like these along with cordless versions and the rig attachments. They even make small mills and lathes.
I Love My Foredom!! Picked mine up at a pawn shop for literally pennies on the dollar. Lightly used without a chuck or chuck key. A few bucks thrown to the Internet and I've been in rotary tool bliss ever since. They truly are a very valuable tool in the shop. Cheers Adam! Zip~
I use a Black And Decker rotary tool which my mom originally got to trim our dog's nails, and besides the tool collar which is very finicky it's a good tool and also has fine speed control. It's seen a lot of use in various projects.
I have a proxxon rotary tool since a few years and later saw that "Miniatur Wunderland Hamburg" is using them too on every makers desk in there workshop. And now Adam has one too, thats awesome :-D
I impulse bought this for my father as a gift few years ago, love it, I did buy rotary extension cord from aliexpress, mainly to avoid putting angled pressure to the engine 😊
I made a 3D printed adjustable guide for that rotary tool today which helps cutting thin strips of materials. I will share it on the Tested discord server in the 3D printing channel and send print files to those who are interested. I purchased this Proxxon tool right after I saw Adam briefly recommending it in a stream a couple of weeks ago.
Proxxon makes great stuff! Their hot wire table is super popular with the model terrain crafting group! I've got one and a ton of 3rd party attachments from Shifting Lands
love my hot wire table. been able to make a ton of stuff with it that i didn't think was possible and the Shifting Lands addons are incredible. cant wait to get their book.
Hey Adam! I'm a moldmaker and have used many sorts of rotary tools in my work. When you dig the Proxxon, I have something new for you: Brushless rotary tools. They are not cheap, but when you have tried a professional brushless rotary tool (I use the Argofile Grande BLH600) you never want to go back. It's like the raw power of a higher end dremel (at low rpm even better) with the vibration of a dental drill (you barely hear it at 50.000 rpm)
If you can handle the crazy 'dental drill' sound, then you may want to also look into air driven. Speeds of 450,000rpm running tiny bits/burrs. I actually had to buy my bits from a jewelry supply shop (about 15 years ago... online much easier now, I'm sure). I used to use my for artwork, but haven't needed it for a while. Extreme detailed work. And, reading Christopher's reply... reminded me that mine was also foot control, you simply control the amount of air going to it. I loved mine for the detail you can do. Plus, it was a simply plastic unit, with a small air tube attached (think aquarium air tube)... so it weighed almost nothing.... literally Sharpie size and weight. Amazing tool, apart from the sound.
Used these at work for years. Great stuff, work perfectly. -There is an even smaller version, you hold it like a fountain pen and you can go extremely precise-
Once I bought a rotary tool I started using it all the time. ALL THE TIME. So I'm very glad I bought proper one (Dremel 300) and it still serves me after few years.
I have the slightly "bigger brother" version (38481). It has a heft that screams quality and you can tell the motor and bearings are first class. It also has the advantage of plugging directly into your wall. If you are doing a lot of fine detail hand work, you may get some hand fatigue with it. But I mostly use mine in a router base so that isn't an issue. It doesn't come with the 3 jaw chuck either but comes with a 5 or 6 pc collet set beyond the 2 that usually come with Dremel. Ryobi used to make a great little corded rotary tool but they've discontinued it. These are very similar in style to the one Adam is demonstrating and the quality runs somewhere between the Proxxon and the Dremel. They were great value for money. Consequently, I've bought up a lifetime supply of them on ebay.
I have a Proxxon IBS/E 220 volt version. The only thing I am missing for that is the small chuck, as it made to fit an extender. I settled on that after burning up 3 genuine dremels, 2 cheap clones ones and a ryobi oscillator. Proxxon also has a great customer service, spare parts for everything..
Hi Adam, thanks for the tip; I just ordered it. I've got a couple of Proxxon tools in my workshop (I'm an architectural model maker and signpainter) and the one I strongly recommend is the BS/E belt sander. It has a nice grip, good weight and is very powerful. Especially handy for those hard to reach spots.
Raw crazy speed you say 🤔 my cheapest rotory tool was a NIB original dremel and that thing cranked to the max sounds like it's trying to trip through time and space even though it doesn't vibrate. I replaced the bearing and in doing so I realized how serviceable the internal electronics are along with the main components and it's never given me trouble.
The Proxxon hot wire table is the gold standard among tabletop wargaming/rpg crafters who use foam. With addons from a company called Shifting Grounds, it can do absolutely amazing stuff. Even without, it's pretty awesome, but you'll want to make a better guide fence.
In Europe we can find Proxxon tools easily! I have several and my prefered one is my tiny disc sander (TG 125/E). I also have a Proxxon rotary tool (for almost 20 years), but mine is 220v (plugs directly to the wall socket). Cheers and stay safe
I've bought a proxxon ibs (bigger brother of the micromot) and i absolutly love it. It allows extremly precise cutting, the speedcontrol is rpm based and not power based so you actually get the rpm you set while cutting and it has enouth power to cut trough 4 mm mild steel with an 3mm carbide milling bit.
Proxxon has been making rotatry tools for decades, it's their key product. I own one, they're actually inexpensive in gemani where they're made (they're made in Luxembourg actually but HQ is in gemani)
All Proxxon tools are great. They aren't cheap, they look old fashioned and basic, but you're getting German manufactured quality every time. I use their collects in my CNC machine. All under the spec'd runout.
I vouch for the Proxxon mini-lathe. Awesome little machine. All Proxxon stuff really.. never tried a low-quality tool from them. These german brands like Proxxon or Knipex won't let you down..
Proxxon is a great brand, most of their older designs are built for life, they also have handtools and especially their Socket wrenches and ratchets were indestructible, had my set for ages and even with occasional really severe abuse, they never failed me.
I use Dremel a lot, you can also get a chuck for a Dremel drill, the ones i use the most are cordless and have great speed controls, my very first drill when i was just a small kid was a minicraft drill that didn't have a speed control so i built one for it
I have the heavy duty transformer from Proxxon and I love it. I like it because I can keep all my tools plugged into it, like their soldering iron. I've also mmodifed other tools to run off of it.
I have a similar Black & Decker rotary tool I believe from the 80s and I love it, the speed control is built into the power supply so the "pen" tool is very light. It also has a chuck, but with a button on the main tool housing that locks it to make it easy to open/close twisting by hand! I used to have two different pens for it, not sure where the other ran off too...
Proxxon is is unsurprisingly very popular in Germany. Honestly, give the lineup a closer look. They have a fantastic range of specifically model maker scale tools. They aren't heavy duty tools at all. But they absolutely excel at fine work. And for a German product I find them really quite affordable. And many of their tools are modular and versatile.
Proxxon is a German company and I actually pick and ship orders for them in our North America/Canada/Mexico headquarters here in North Carolina. I might have even been the one that picked/shipped that tool you have depending on when and where you bought it. We fulfill orders from amazon,ebay,walmart,home depot etc. etc. and our companies website as well and now orders for this tool have increased like crazy because of this video! ;)
I went with the Dremel flex shaft attachment and affixed it to the end of my Milwaukee M12 rotary tool, it's a direct fit which is awesome! It's super light too since the motor and everything in in the M12 tool itself!
I picked up this same bit of kit - works wonderfully. I can manipulate it with much more precision of movement than my Dremel. Excellent recommendation.
@Steve Pilant Music @mrrobotoboto Hi. Is the Proxxon a standard 1/8” chuck shank, like the Dremel? Also, does the Proxxon accept ALL types of Dremel sized bits? I have all sorts of Dremel and knockoff bits. Would be great to use them in a Proxxon. Thank you.
Proxxon also makes an adapter wich has an onboard speed control, so you can drop the speed even more. This model is excelent for scale modelling cause you cannot burn through the plastic as with other high speed rotary tools. Also getting the 3 point jaws instead of the collets, allows you to use any kind of bit, from any manufacturer. My only complain is that it doesnt have a seperate on/off button that you can press while using it instead of turning the speed dial.
I have owned one of these for 10 years and could not live without it! There are dozens of different versions of this tool and numerous accessories. The nice thing about Proxxon rotary tools is that they are double suspended, so there is no shaking and high precision (You can see the long black "neck" at the front, that's where the magic happens; in fact if it shakes: your bit is bent, it is never the tool). If you are starting out or don't use these every day: I recommend the kit version that comes with dozens of different bits that make it an almost universal tool. Proxxon also makes various other tools (like sanders, saws, etc.) - many of them at the right size for model working or fine detailed working. They are to European model makers what Bosch is to European contractors. So far the only Proxxon tool that does not work well is the small K230 table saw - it is underpowered and burns out easily. Let's see how its big brother behaves in my upcoming projects.
I've been using the Proxxon IBS/E model for several years now, it's more or less the big brother of yours, goes directly into the wall outlet and comes with like 5 or 6 different grip sized tips. Unfortunately not with the three adjustable jaws, but stil good enough for most of the light work that I'm doing with it. Well worth its money in my book.
Fun! We are in quarantine and my rommate just received a Dremel pen version in the mail today. We were having great fun testing it out and right after I get back to my computer I see this video. Proxxon does really quality stuff for miniature makers. For instance: If you need an affordable foam cutter that is also a work horse, Proxxon has your back. What I wanted to get at is this: There are cheaper options for precision rotary tools, even the Dremel one cost only roughly 50 Euro. Maybe not as versatile as this one but it does make a good starter unit.
Proxxon is just a great brand. In Europe it is all around, the variety of tools and machines is quite big. It is for miniatures - and dentists^^ I used it quite a lot.
The control is why I like the Dremel brand foot pedal. Fits in line to the power cord. Let's you full speed to barely nothing. It strong and durable. It used to by my dads. Probably 1960ish
I'm a huge fan of Proxxon tools, especially the Professional Rotary Tool IBS/E, the machined nose piece makes it easy to mount for hand free use and the double bearing make it really robust. I used several of them as auxiliary high speed spindles on my CNC mill until I replaced them with a water cooled 3 phase spindle motor. Great tool!
@Ward Shelley @mrrobotoboto Hi. Is the Proxxon a standard 1/8” chuck shank, like the Dremel? Also, does the Proxxon accept ALL types of Dremel sized bits? I have all sorts of Dremel and knockoff bits. Would be great to use them in a Proxxon. Thank you.
I use a 230V Proxxon tool (basically the bigger version of the one adam has) for over 10years without any issues,its MUCH better than any Dremel or other brand, plus you can use it with any tools as it has clasps and holders for any metric size tool shafts.
Adam I’m in love! With Proxxon! Newer didn’t know that this tool-line was available. I use Amazon.ca so the pricing is a bit higher but within reach. But they have a maker equipment that is out of this world. Thanks for today video much appreciated.
I have a proxxon ratchet set, I love it, so much so that someone time ago I bought a second one to keep in my car and afterwards a 3rd one so I could trow most of the first one in my toolbox and still have a complete set in the workshop...
I have been using a Dremel with a flex shaft for years and love the precision and control. My Dremel has a variable speed, although not a dial. It also has a chuck and works really. If it ever stops working, I will check out one of these guys.
I've used a highly versatile corded Craftsman tools for years. It even has a flexible shaft that increases it's usefulness. However, it's big, heavy and reliant upon 120Vac power. I recently added Ryobi's rotary tool to my assortment of 18v One+ tools and am, so far, pretty pleased. It too has earned a place in my electronics set up, and will be super handy to take anywhere for a quick, small job.
The Foredom flex shaft tools are excellent in situations where you need actual torque, rather than speed. They are the standard in the jeweler and metalsmith world.
Funny thing, I went to use their affiliate link to buy the Proxxon and was reading reviews when someone mentioned Foredom. After some research, I decided to go with the Foredem due to the torque and ability to run in reverse. If you are left handed or ever need to use your left hand to use a rotary tool, the ability to run in reverse is invaluable!
Proxxon are nice tools, thanks for sharing your find. My brother and I have invested in a small desktop proxon milling machine that was made into a CNC mill. It serves us well as a small part prototyping tool, PCB manufacture and also making parts and accessories for our RC and other hobbies. With all the Proxxon accessories out there you can really build up a tool to serve all sorts of diverse maker needs.
I ❤️️ my dental handpiece and set of diamond burs that I got off E-Bay for literally $20. It's a great option for detail work, and making holes in glass. Something most makers never thought of. 🔧
Перевод с русского на английский выполнен по технологии PROMT Hello Adam Savage! Proxxon is a good tool. 60/E I don't, but I have BFB 2000! I really liked MythBusters. Learned a lot about the tool and mechanisms. Thank you. Be healthy!
Here are the tools Adam is discussing: Proxxon Rotary Tool with AC Adapter: amzn.to/2z9SIF5
Proxxon Rotary Tool with US plug: amzn.to/3bpDGtl
Disclaimer: Tested may earn an affiliate commission when you buy through the links here.
Your first amazon seller is out of stock - might want to find another seller to get that good good affiliate cha-ching. :) Thanks!!
Proxxon also makes some of THE best foam cutters out there. Very nice heat control, similar to the small rotary tool in this video.
Elio Rose I second this. It’s easily one of the most popular tools of the tabletop crafting community and for good reason.
I´m using the almost very same tool for now more than 35 years! Not on a daily base anymore like the first years, but frequently. It is still the same tool, and Power converter.
Proxxon is one of the top tool companies over here in Germany, and while it is on a lot of areas not the single "best company" but sharing with 2-3 competitors, you can hardly make any mistakes if you buy a new tool, and decide for a Proxxon!
adam if you need a tiny little drillpress for very exact jobs, take one from proxxon. they are golden.... use one for decades...
This series should be called "Adam Savage adds stuff to your Amazon Wishlist"
You don't want to know how long my AMAZON wish list has gotten ever since I have been subscribed to @tested.com.
Tom Arnd ugh. No. We don’t order garbage tools
@@lonerider5315 If you think, Adam is recommending, and working with, "garbage tools", why are you looking this channel?
"Go get the one at your local hardware store." #CancelPrime
"Adam Savage wipes out my stimulus check"
I very much appreciated the guy at the hardware store talking me out of getting the battery operated more expensive Dremel for the much cheaper plug-in model that actually has a slight torque advantage. God bless his soul.
my mother got me the battery dremel years ago when I was in school. Its great that I can take it far away from power, but I cannot tell you how often I run out of battery
I have the battery powered dremel combined with their electric screwdriver, both at the same shared charging station. They are maybe 8 + years old and still going, although the charge isn't lasting long these days, likely the bats are going. Still, they are my go to tools. Maybe the Proxxon will be their replacement.
@JKSSubstandard
I love the idea of being able to walk away from a power source in theory, but it took a DeWalt driver for me to become a true believer that a battery can deliver real torque. I think one of the weirdest things to get used to is that a Dremel doesn't really have as much to do with torque, but rather speed, but it still kind of benefits from being plugged into AC power.
doesn't the plug in model have plastic threads instead of metal?
No way. I was looking at Rotary tools, stumbled upon one I'd never heard before, tried finding reviews, AND ADAM FRIGGEN SAVAGE USES THEM. That's all the review I need for me to consider them
Hey Adam, I recently found a pair of pliers that blew me away. They are Neji-saurus screw pliers. They have these neat notches that are designed to bite into stripped screws. They have pulled more stripped screws for me in the past few months than I was ever able to pull with a screw extractor kit.
Those are legit amazing pliers. I second your recommendation. If their utility fits your needs, it's a 100% must have
I follow a miniature modelling RUclipsr called black magic craft who sings the praises of proxxon's hot wire cutter when working with foam. There's actually a lot of overlap with the kinds of things Adam does in his one day builds.
Yeah, I just ordered one of the hot wire tables because of BMC. I can't wait to try it.
I have one including the shifting lands add-ons (guider pro, circle jig, and angle cutter) and it's fantastic. I use it every day.
I've always used Proxxon tools, when I finally got to handle a Dremel , after years and years of seeing it referred as the go-to tool the first time I came across a Dremel I picked it up and the reaction was "ewww... really?"
The Proxxon's I've had never broke or failed, and with the collet system the precision of the spindle is fantastic, highly recommended.
I had the same reaction, the proxxons just feel better and I much prefer the speed control. I've also found I accidentally nudge the speed control on dremels way more
Agreed. Have had Dremels (mid to high-level models), even with proper chucks. Inherited an entry-level Proxxon with a simple drill press stand, waaay better feel to it! Now my go-to kit!
All the older model-makers use Proxxon, they have been around for ages...
Workhorse vs Showhorse. Dremel has name recognition with people that don't actually know better, while only people who know their shit have heard of Proxxon.
Yep proxxon is really amazing, at the place where i work as an apprentice we even drill pcb holes down to 0.3mm by hand with this tool, just amazing
I'd love to talk a little about this comparison.
I specifically work on fiberglass boats. I've used and abused dremmels for a long time as a go-to material removal tool. I truly abused the tool though because of its dual use for me, in which I use it for course material removal with pressure for 20 minutes straight, pulling in fiberglass dust, exhausting into my hand because I always choke up on the tool. But then I run into a detail on the boat that demands the precision that put a rotary tool in my hand in the first place. I've been told I ought to be using a pneumatic die grinder, which I think is true for the course work, but I'd like to retain the precision and feel of the rotary when I get to the details.
So. I killed my dremmel. Good and dead. I need to replace it. This Proxxon is really appealing to me, but I'm going to end up doing heavy course work with the tool. Most people I've seen singing praises put 90% of their use on their tool in fine work, and while I do need precision and indulge in the art of taking off an almost invisible layer by feel, 90% of my use time will be trying to maximize removal rate. I don't want to do a disservice to a good tool using it for the wrong thing, but if you have evidence that my workload won't hurt the tool, I want it.
It's a German company. German quality.
In europe (or Sweden where I live) Proxxon is commonly seen as the Pro-level tool where Dremel is more commercially available.
@Beezle Dude, seriously?
@@georgg.5730 what, too soon for you? he's just making fun of the whole "german quality" thing. Face it: "german quality" is an american invention.
@@didgitalpunk german quality is a fact. That is because there are a lot more Industry standards on how to label and test a product (DIN).
Therefore, the competition is harder because you can better compare brands.
If you buy an expensive german tool, you will get great performance.
@@didgitalpunk No, it's not american. The btritish government invented it, to tell their people not to buy german products. But it backfired...
@@didgitalpunk German quality is a thing, they make great tool. And I am not from the US, I am french
The Proxon "Flexi Shaft" is an amazing addition to that rotary tool. It will give you even more freedom and finesse!
I've been using it for years, and I would never go back!
Does it also have a collet
I have one for my Dremel. A great way to reduce the weight of holding the whole tool.
@@Xtafa It does, yes. You can swap out the flexi-shaft's collets with different sizes. Very straightforward accessory.
You should really take a look at Proxxon's Pen Sander as well. I've been using one for years to clean up small 3d prints. I've 3d printed new tips for it, and just use double sided foam tape for attaching any sandpaper to the tips. It is seriously one of my favorite tools I've ever purchased.
Good day , I am a dental technician and rotary tools are a main stay of our industry. I have looked and purchased endless rotary tools in my life and to be honest. The ones made for dental tech are the bast and most efficient to use. Thankfully you can get the same models in other industries like nail techs. I believe as a maker that moves rather quickly you will LOVE the quarter turn quick chucks of many dental tools. The small micro motors these days are pretty much as powerful or more powerful that the Fordomes to the point that we've packed all of them away even tho they still function. Aslo the variable speed foot control will change your life just as much as the foot control on a tig welder. ...Look for a model around 35k-45k rpm..the digital (pwm) drives have more constant torque but its not a necessity...Hope this advice helps. Keep up the amazing work and stay safe during this pandemic.
I'm new to Dremels, but this thing has been great. ruclips.net/user/postUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR The variable speed is awesome and the cordless aspect makes it so easy to work with. I am constantly finding uses for it that make tasks easier. Recently I put in a new deadbolt on one of our doors. I knew I had to enlarge the hold where the deadbolt goes into the door frame. At first I thought I would have to get a big router and figure out how to use it for that, but then I rermembered we have the dremel. I was able to enlarge the hole almost as easy as if I was drawing with a pen. It's also great for grinding our dog's nails done and so many other household tasks.
I bought a ROK branded rotary tool for about $25-30 CAD several years ago. Best entry-level power tool I have ever owned. Still use it to this day.
The rotary tool in the video is the Proxxon 28512 12-Volt Micromot 60 EF. The one in the description is a different tool that's a little bigger.
I noticed this too. Added the 60EF to my amazon wishlist (which was still in stock.)
Ive been running a proxxon for 20 years now and its going strong still. The flexible penshaft makes it even better and lighter.
I always watch all kind of diy videos and it surprises me how nobody ever think of dental supply kind of rotary tools, they are really precise and not to expensive if you only get the hand piece and you get it working with a universal laptop charger.
I've been looking at a few dental micromotors! Which handpiece do you have? So you don't necessarily need the unit thing most seem to come come with?
When you get a tool for Christmas, check it out on RUclips, and Adam Savage made a video about it. It's the best feeling.
Been using the same Proxxon TBM220 pillar drill for the last 8 years at work to drill 0.25m holes under microscope, works perfectly, no run-out or slop in the quill, it's also been used almost daily for drilling sub 2mm holes in titanium and the belts don't slip.
Proxxon is a very well known brand here in Europe, it mostly stands for high quality products.
Erebos I was wondering if this was European, the color scheme reminds me of some of the classic train liveries over there!
@@SegginsProductions proxxon is a German company, but I guess their factory is based in Poland... though my EF & transformer has a Luxembourg sticker on it! 🧐
This video came out on my birthday! I think you actually wished me a happy birthday on a Q&A stream you did this same day but it feels like a lifetime ago now. I use rotary tools daily, I have one older dremel I picked up from a flea market thats got three speeds: High, Low, and Off, which lives in my leatherwork toolbox and is all I need for things like sanding or burnishing seams and drilling the odd hole in a piece of antler or through particularly thick joints. I have a radio shack branded one from an old roommate with five settings plus intermediate settings between those that I keep as my backup tool and my dremel 4000 which gets constant use. ive taken it apart to blow out dust and replace bearings and brushes several times and its been going strong the better part of a decade. But over quarantine ive discovered a love and talent for carving and engraving bone, and a dremel is just too heavy and bulky for that sort of work, and the flexible attachment while handy isnt the kind of long term solution I need as speed cant be controlled at the handpiece side in that configuration. Im considering springing for one of these as it looks like the ideal form factor for what I need with the quality of life concessions the dremel has been lacking. I love seeing the tools youd never come across on your own but suddenly someone pulls out the exact thing you need and suddenly your life changes dramatically, even if it is a video thats been out for a while, i decided to rewatch it to see this tool in action.
I've been using this tool for more than a year now. I'm really happy with it. The chuck lets you use quite a lot of different tools such as cutting discs, engraving tips, drills etc. . The nice thing is, their 12V product line is quite diverse and all of them work with the same transformer. As a architecture student, I build models on a daily basis and using this has helped me a lot. I always thought that Dremel was the better and more reliable brand, but the prices for Proxxon tools are much lower than for Dremel here in Germany (the Brand is German but the products are made in eastern EU countries for a long time now). The tool + the adapter might be too much for someone looking just for a single tool but if you need other things like the pen sander or Styrofoam cutter, the savings add up quickly. It's much quieter than my older Dremel back at home, lacks the torque of a Dremel but still... The flexible cord and how light it is are just enough to sell this thing.
@mrrobotoboto Hi. Is the Proxxon a standard 1/8” chuck shank, like the Dremel? Also, does the Proxxon accept ALL types of Dremel sized bits? I have all sorts of Dremel and knockoff bits. Would be great to use them in a Proxxon. Thank you.
I´ve owned a Proxxon socket wrench set for over twenty years now. It´s still in perfect shape, and I´ve been working on cars, motorbikes and all that stuff with It. In the Netherlands (where I live) Proxxon is an A+ brand, not available in the regular hardware stores. I can recommend It... Stay safe.
I've had Proxxon tools for 15 years or so bought them for an in house architectural modelshop I ran ..Solid German make, I have the TSG250 disk sander , The Proxxon Micromot FET table saw and literall was gifted the PS13 Pen sander this week as a belated birthday gift.
I did have the KGS80 chop saw but sold it as I didnt use it much.
Pricely tools but can highly recommend them.
If you like the chuck, you're gonna love the collets! three-way split and hardened, super precise
Anyone who is into miniatures should definitely check the rest of the products from Proxxon.
They make amazing foam cutters and miniature power tools.
Got an amazon card for Christmas... I literally never use amazon, so I bought one of these. I've spent plenty of time using my parents Dremel from the 90s to know I don't want to anymore... needless to say, I'm stoked!
I also have a Dremel 300 for more than 15 years now and it's like a leatherman super tool , not the best tool in the world but it does everything you can possible need well enough. One trick I have learned is if you have to use the little abrasive discs to cut something rather use a pneumatic pencil grinder, it does not snap the discs that easily. And use the thinnest disc possible to speed up the cutting process.
i have the 230v Version. Got it it for 60€. Proxxon also sells wrenches and ratchets that are quite good and affordable.
I am really loving the shorter videos! These are perfect for the million places during my day where I have 5 minutes where I'm waiting for my computer to finish doing something.
My dad has been using one of these Proxxon drills for high precision woodworking for years and years. Except for a fault in the cable, it's been working great.
I bought a proxxon kit thing with a dremal and saw and stuff like that it's around 50 or so years old and still works brilliantly
Hey Adam, the Proxxon hot wire foam cutter is a staple in the tabletop terrain building scene. It's an absolutely fantastic hot wire table. The only limitation is the 6" throat and a rip-fence that tends to wander. However, after making a very simple yet very effective custom fence plus the addition of a foot-pedal switch, it's an absolute dream to work with for cutting foam. You can even cut some of the lower temp thermoplastics on it if you're careful.
I used a Proxxon 36-piece ratchet/socket set for 5 years in harsh industrial settings and it worked extremely well. Very high quality and precision.
Lightweight precision rotaries are EVERYTHING. For small, detailed work that doesn’t require a lot of horsepower, I use the Dremel Stylo. Still has plenty of zip but it’s small, lightweight and easy to manipulate. It’s made life *so much easier* for certain things
I looked up their site, Proxxon was founded in Germany and they make things like these along with cordless versions and the rig attachments. They even make small mills and lathes.
I Love My Foredom!! Picked mine up at a pawn shop for literally pennies on the dollar. Lightly used without a chuck or chuck key. A few bucks thrown to the Internet and I've been in rotary tool bliss ever since. They truly are a very valuable tool in the shop. Cheers Adam! Zip~
I changed my dremel collets over to the chucks... best upgrade you can do!!!
I use a Black And Decker rotary tool which my mom originally got to trim our dog's nails, and besides the tool collar which is very finicky it's a good tool and also has fine speed control. It's seen a lot of use in various projects.
I have a proxxon rotary tool since a few years and later saw that "Miniatur Wunderland Hamburg" is using them too on every makers desk in there workshop.
And now Adam has one too, thats awesome :-D
I impulse bought this for my father as a gift few years ago, love it, I did buy rotary extension cord from aliexpress, mainly to avoid putting angled pressure to the engine 😊
I made a 3D printed adjustable guide for that rotary tool today which helps cutting thin strips of materials. I will share it on the Tested discord server in the 3D printing channel and send print files to those who are interested.
I purchased this Proxxon tool right after I saw Adam briefly recommending it in a stream a couple of weeks ago.
Proxxon makes great stuff! Their hot wire table is super popular with the model terrain crafting group! I've got one and a ton of 3rd party attachments from Shifting Lands
love my hot wire table. been able to make a ton of stuff with it that i didn't think was possible and the Shifting Lands addons are incredible. cant wait to get their book.
I came here to say this. I agree, that table is fantastic for cutting XPS foam!
Word. The Proxxon Thermocut is a great tool and the Shifting Lands add-ons really release its full potential.
Hey Adam!
I'm a moldmaker and have used many sorts of rotary tools in my work.
When you dig the Proxxon, I have something new for you: Brushless rotary tools.
They are not cheap, but when you have tried a professional brushless rotary tool (I use the Argofile Grande BLH600) you never want to go back.
It's like the raw power of a higher end dremel (at low rpm even better) with the vibration of a dental drill (you barely hear it at 50.000 rpm)
My wife does a lot of jewelry working which requires a lot of precision with tiny tiny bits. This looks like a fantastic addition to her studio
Ben Burnes better to get one with a foot control. Marathon make wonderful ones, perfect for a jeweller
If you can handle the crazy 'dental drill' sound, then you may want to also look into air driven. Speeds of 450,000rpm running tiny bits/burrs. I actually had to buy my bits from a jewelry supply shop (about 15 years ago... online much easier now, I'm sure). I used to use my for artwork, but haven't needed it for a while. Extreme detailed work. And, reading Christopher's reply... reminded me that mine was also foot control, you simply control the amount of air going to it. I loved mine for the detail you can do. Plus, it was a simply plastic unit, with a small air tube attached (think aquarium air tube)... so it weighed almost nothing.... literally Sharpie size and weight. Amazing tool, apart from the sound.
@@Chris_Hannan Good point! :D
I got their disc sander 250mm and man its good!! Bought it second hand and learned that it was around 20 years old and still runs very good.
Used these at work for years. Great stuff, work perfectly.
-There is an even smaller version, you hold it like a fountain pen and you can go extremely precise-
I love my Dremel. I have the dremel chuck attached directly to the flex cable. Works amazing for me
Once I bought a rotary tool I started using it all the time. ALL THE TIME. So I'm very glad I bought proper one (Dremel 300) and it still serves me after few years.
I have the slightly "bigger brother" version (38481). It has a heft that screams quality and you can tell the motor and bearings are first class. It also has the advantage of plugging directly into your wall. If you are doing a lot of fine detail hand work, you may get some hand fatigue with it. But I mostly use mine in a router base so that isn't an issue. It doesn't come with the 3 jaw chuck either but comes with a 5 or 6 pc collet set beyond the 2 that usually come with Dremel. Ryobi used to make a great little corded rotary tool but they've discontinued it. These are very similar in style to the one Adam is demonstrating and the quality runs somewhere between the Proxxon and the Dremel. They were great value for money. Consequently, I've bought up a lifetime supply of them on ebay.
I have a Proxxon IBS/E 220 volt version.
The only thing I am missing for that is the small chuck, as it made to fit an extender.
I settled on that after burning up 3 genuine dremels, 2 cheap clones ones and a ryobi oscillator.
Proxxon also has a great customer service, spare parts for everything..
Hi Adam, thanks for the tip; I just ordered it. I've got a couple of Proxxon tools in my workshop (I'm an architectural model maker and signpainter) and the one I strongly recommend is the BS/E belt sander. It has a nice grip, good weight and is very powerful. Especially handy for those hard to reach spots.
Raw crazy speed you say 🤔 my cheapest rotory tool was a NIB original dremel and that thing cranked to the max sounds like it's trying to trip through time and space even though it doesn't vibrate. I replaced the bearing and in doing so I realized how serviceable the internal electronics are along with the main components and it's never given me trouble.
The Proxxon hot wire table is the gold standard among tabletop wargaming/rpg crafters who use foam. With addons from a company called Shifting Grounds, it can do absolutely amazing stuff. Even without, it's pretty awesome, but you'll want to make a better guide fence.
In Europe we can find Proxxon tools easily! I have several and my prefered one is my tiny disc sander (TG 125/E). I also have a Proxxon rotary tool (for almost 20 years), but mine is 220v (plugs directly to the wall socket). Cheers and stay safe
I've bought a proxxon ibs (bigger brother of the micromot) and i absolutly love it. It allows extremly precise cutting, the speedcontrol is rpm based and not power based so you actually get the rpm you set while cutting and it has enouth power to cut trough 4 mm mild steel with an 3mm carbide milling bit.
Proxxon has been making rotatry tools for decades, it's their key product. I own one, they're actually inexpensive in gemani where they're made (they're made in Luxembourg actually but HQ is in gemani)
All Proxxon tools are great. They aren't cheap, they look old fashioned and basic, but you're getting German manufactured quality every time. I use their collects in my CNC machine. All under the spec'd runout.
I vouch for the Proxxon mini-lathe. Awesome little machine. All Proxxon stuff really.. never tried a low-quality tool from them.
These german brands like Proxxon or Knipex won't let you down..
I have the MICROMOT 50/E. It's 9-10 years old now and I use every excuse to take it out of its case and grind/drill/cut something :)
Proxxon is a great brand, most of their older designs are built for life, they also have handtools and especially their Socket wrenches and ratchets were indestructible, had my set for ages and even with occasional really severe abuse, they never failed me.
Nice!
Wondering if you'd do a short video showing the variety of bits that you use in this tool and what you do with them...
:-)
I use Dremel a lot, you can also get a chuck for a Dremel drill, the ones i use the most are cordless and have great speed controls, my very first drill when i was just a small kid was a minicraft drill that didn't have a speed control so i built one for it
I have the heavy duty transformer from Proxxon and I love it. I like it because I can keep all my tools plugged into it, like their soldering iron. I've also mmodifed other tools to run off of it.
My dad had one for over 20 years and still works really well. I highly recommend it!
I love my Harbour Freight Formal rotary tool an also my Dermel rotary tools too. Thanks for showing this rotary tool , Adam !!!!!!!!!!
I have a similar Black & Decker rotary tool I believe from the 80s and I love it, the speed control is built into the power supply so the "pen" tool is very light.
It also has a chuck, but with a button on the main tool housing that locks it to make it easy to open/close twisting by hand!
I used to have two different pens for it, not sure where the other ran off too...
I got my first rotary tool at age 14 for working on my model railroad. That's over 30 years ago. I still have it and it still works.
The robotics team I'm on has this mini chop saw made by proxxon and it's just wonderful for cutting aluminum bars, of which we cut a lot of.
Proxxon is is unsurprisingly very popular in Germany.
Honestly, give the lineup a closer look. They have a fantastic range of specifically model maker scale tools.
They aren't heavy duty tools at all. But they absolutely excel at fine work.
And for a German product I find them really quite affordable. And many of their tools are modular and versatile.
Proxxon is a German company and I actually pick and ship orders for them in our North America/Canada/Mexico headquarters here in North Carolina. I might have even been the one that picked/shipped that tool you have depending on when and where you bought it. We fulfill orders from amazon,ebay,walmart,home depot etc. etc. and our companies website as well and now orders for this tool have increased like crazy because of this video! ;)
I went with the Dremel flex shaft attachment and affixed it to the end of my Milwaukee M12 rotary tool, it's a direct fit which is awesome! It's super light too since the motor and everything in in the M12 tool itself!
I picked up this same bit of kit - works wonderfully. I can manipulate it with much more precision of movement than my Dremel. Excellent recommendation.
@Steve Pilant Music @mrrobotoboto Hi. Is the Proxxon a standard 1/8” chuck shank, like the Dremel? Also, does the Proxxon accept ALL types of Dremel sized bits? I have all sorts of Dremel and knockoff bits. Would be great to use them in a Proxxon. Thank you.
Proxxon also makes an adapter wich has an onboard speed control, so you can drop the speed even more. This model is excelent for scale modelling cause you cannot burn through the plastic as with other high speed rotary tools. Also getting the 3 point jaws instead of the collets, allows you to use any kind of bit, from any manufacturer. My only complain is that it doesnt have a seperate on/off button that you can press while using it instead of turning the speed dial.
I have owned one of these for 10 years and could not live without it! There are dozens of different versions of this tool and numerous accessories. The nice thing about Proxxon rotary tools is that they are double suspended, so there is no shaking and high precision (You can see the long black "neck" at the front, that's where the magic happens; in fact if it shakes: your bit is bent, it is never the tool). If you are starting out or don't use these every day: I recommend the kit version that comes with dozens of different bits that make it an almost universal tool.
Proxxon also makes various other tools (like sanders, saws, etc.) - many of them at the right size for model working or fine detailed working. They are to European model makers what Bosch is to European contractors.
So far the only Proxxon tool that does not work well is the small K230 table saw - it is underpowered and burns out easily. Let's see how its big brother behaves in my upcoming projects.
I have the table-mounted hot wire cutter from Proxxon. It's invaluable to me for making miniature scale terrain.
I've been using the Proxxon IBS/E model for several years now, it's more or less the big brother of yours, goes directly into the wall outlet and comes with like 5 or 6 different grip sized tips. Unfortunately not with the three adjustable jaws, but stil good enough for most of the light work that I'm doing with it. Well worth its money in my book.
Proxxon Thermocut - foam cutter for modelling, brilliant tool once you get the hang of it.
Fun! We are in quarantine and my rommate just received a Dremel pen version in the mail today. We were having great fun testing it out and right after I get back to my computer I see this video. Proxxon does really quality stuff for miniature makers. For instance: If you need an affordable foam cutter that is also a work horse, Proxxon has your back.
What I wanted to get at is this: There are cheaper options for precision rotary tools, even the Dremel one cost only roughly 50 Euro. Maybe not as versatile as this one but it does make a good starter unit.
I've used a proxxon rotary tool for years now. It is bigger and heavier since the power source is built in but it's so good.
Proxxon is just a great brand. In Europe it is all around, the variety of tools and machines is quite big. It is for miniatures - and dentists^^ I used it quite a lot.
Proxxon is super helpful to the maker community, i want to get their hot wire table for cutting foam as soon as possible
All the replacement saws for the table saw and the pedal for tools work great
The control is why I like the Dremel brand foot pedal. Fits in line to the power cord. Let's you full speed to barely nothing. It strong and durable. It used to by my dads. Probably 1960ish
I'm a huge fan of Proxxon tools, especially the Professional Rotary Tool IBS/E, the machined nose piece makes it easy to mount for hand free use and the double bearing make it really robust. I used several of them as auxiliary high speed spindles on my CNC mill until I replaced them with a water cooled 3 phase spindle motor. Great tool!
@Ward Shelley @mrrobotoboto Hi. Is the Proxxon a standard 1/8” chuck shank, like the Dremel? Also, does the Proxxon accept ALL types of Dremel sized bits? I have all sorts of Dremel and knockoff bits. Would be great to use them in a Proxxon. Thank you.
@@mikeike7114 It comes with 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" collets, worked with everything I've tried so far.
I use a 230V Proxxon tool (basically the bigger version of the one adam has) for over 10years without any issues,its MUCH better than any Dremel or other brand, plus you can use it with any tools as it has clasps and holders for any metric size tool shafts.
Adam I’m in love! With Proxxon!
Newer didn’t know that this tool-line was available. I use Amazon.ca so the pricing is a bit higher but within reach. But they have a maker equipment that is out of this world.
Thanks for today video much appreciated.
I have a proxxon ratchet set, I love it, so much so that someone time ago I bought a second one to keep in my car and afterwards a 3rd one so I could trow most of the first one in my toolbox and still have a complete set in the workshop...
Would appreciate Adam's guidance on proper use of the speed control: what materials, which tools, etc.
I have been using a Dremel with a flex shaft for years and love the precision and control. My Dremel has a variable speed, although not a dial. It also has a chuck and works really. If it ever stops working, I will check out one of these guys.
I used to have old black and decker that did all that from 1980s really good I still got it in my tools works well still
I've used a highly versatile corded Craftsman tools for years. It even has a flexible shaft that increases it's usefulness. However, it's big, heavy and reliant upon 120Vac power. I recently added Ryobi's rotary tool to my assortment of 18v One+ tools and am, so far, pretty pleased. It too has earned a place in my electronics set up, and will be super handy to take anywhere for a quick, small job.
I have had one of these Proxxon tools for years and it is worth every cent, it is a quality tool.
After my dremel 4200 crapped out on me i switched to proxxon and never looked back. They are incredible and well worth the pricetag.
The Foredom flex shaft tools are excellent in situations where you need actual torque, rather than speed. They are the standard in the jeweler and metalsmith world.
Funny thing, I went to use their affiliate link to buy the Proxxon and was reading reviews when someone mentioned Foredom. After some research, I decided to go with the Foredem due to the torque and ability to run in reverse. If you are left handed or ever need to use your left hand to use a rotary tool, the ability to run in reverse is invaluable!
Ic an also highly recommend the tiny lathes and Mills Proxxon makes, very good for any sort of maker.
Proxxon are nice tools, thanks for sharing your find.
My brother and I have invested in a small desktop proxon milling machine that was made into a CNC mill. It serves us well as a small part prototyping tool, PCB manufacture and also making parts and accessories for our RC and other hobbies.
With all the Proxxon accessories out there you can really build up a tool to serve all sorts of diverse maker needs.
I ❤️️ my dental handpiece and set of diamond burs that I got off E-Bay for literally $20. It's a great option for detail work, and making holes in glass. Something most makers never thought of. 🔧
I'm using a Marathon N7R Micro-Motor System at work and it's a great machine.
I have this one for years for drilling tiny holes in PCBs. With the seperatly sold drill press stand. It's a great tool.
Перевод с русского на английский выполнен по технологии PROMT
Hello Adam Savage! Proxxon is a good tool. 60/E I don't, but I have BFB 2000!
I really liked MythBusters. Learned a lot about the tool and mechanisms. Thank you.
Be healthy!