CLAMP UNIT DESIGN | BIW FIXTURE | CATIA

For any queries reach us at [e-mail]
Here is an video of clamp unit design used in biw fixture design domain, hope this video helps for who are interested in learning the BIW fixture design

[@rajeshjejurkar26]

Make more videos on fixture and gauge design.... will be lot of helpful

[@caddscience8822]

sure, will upload more videos on this topic

[@emirrasgido9033]

Thank you crack!!! Best regard from Argentina 🫶🏻

[@caddscience8822]

So glad to see someone from overseas, Thank you !!

[@KarthickR-tt7yb]

Make more tutorial videos for Biw fixture design

[@caddscience8822]

sure !!

[@manasops4372]

Make more videos, me and my friend waiting for your next videos, really This type of video we need for study, but this type of videos not found on RUclips

[@caddscience8822]

sure, will upload more on this topic

[@ManivannanK-kf5ee]

Why you are not using coincidence command, offset command in assembly design.

[@caddscience8822]

Assembly constraints are not much used in catia as snapping is very easier and faster

[@anwarbraham9549]

In companies that work on large assemblies on CATIA, they prefer not using constrains because it would create update loops that will take a lot of time, instead they use a common axis system for all the parts, then design them in their final position so when you bring the part in the assembly is will come in its good position.
If the part is used in different positions they would just snap it to the other position without constrains
I hope this helps

[@mayurshinde7361]

Axis system symbol not shown at my system 3:35 .

[@caddscience8822]

may be this will help
www.learnvern.com/catia-course/reference-axis

[@RAhinr214]

bro could you give the website for downloading the panel

[@caddscience8822]

I downloaded it from grabcad, you can check there

[@Raja_Ram19]

Sir how can download this type panel for precticing in my system

[@caddscience8822]

Check in grabcad website, you'll find some

[@ashokchakravarthi8465]

can you please share the cylinder and clamp arm links to download?

[@caddscience8822]

There are many cylinder makers like smc tunkers destaco you can visit their official website and download, this link is to tunkers cylinders and clamp arms
www.tuenkers.com/publish/92342d91_da54_cb89_add9bde5c193b028.cfm?l1=Clamping

[@newtechnology9263]

In two way shimming firstly said one is horizontal (-) and vertical side( | )shimming but later you said chopping side (perpendicular) shimming why sir

[@caddscience8822]

Hi, shimming should always be parallel or perpendicular to principal planes, please mention the time where I said perpendicular to chopping, I will explain, thanks

[@newtechnology9263]

​@@caddscience8822 no sir, I am asking one default x direction shimming and another one coming z direction shimming why sir , I believe that x and y direction shimming required not in z direction please clarify sir

[@caddscience8822]

Ok i understood your concern, default shimming is the nearest principal plane for the chopping, it can be x y or z

[@newtechnology9263]

@@caddscience8822 in two way shimming we can take xy or xz if x is default direction shimming,thank you for clarifying sir

[@caddscience8822]

@@newtechnology9263 yes, if x is default direction and less than 15 degree then only x direction is enough, I will also upload video on shimming very soon, please watch it for more information on shimming

[@abhigowda8376]

❤❤tq bro

[@caddscience8822]

welcome, hope it helped

[@jyotibakesarkar1590]

Make more videos sir😊

[@caddscience8822]

Sure !! Planning to do next video on cylinder selection