How to Apply AwlWood to Teak on your Boat

Have you ever looked at your boat and wondered when the day would come when you wouldn't have to mess with your teak ever again? Well, that day may never come but I've learned that AwlWood is a great, professional grade varnish that will keep your teak looking "yacht-like" for up to 5 years with minimal maintenance. I've sat on the task of revarnishing my teak for a long time and after trial and error with other teak products and I finally decided to try AwlWood.
As an Amazon Associate I earn from qualifying purchases. Purchasing products through the links listed below is a great way to make it possible to create more videos like this one and will not change price of your purchase.
Added corrections
-Only 1 coat of primer is needed. Sand with 120 grit when it dries and apply your first coat of gloss the same day.
-Do not use acetone, as it made the cured varnish sticky. I used a damp towel to remove excess dust and followed with a dry lint free towel and it was fine.
Suggested Products and the amount I purchased:
AwlWood Gloss (2-3 quarts)
amzn.to/48NTDXz
AwlWood Brushing Reducer (1 quart)
amzn.to/3RQZuEj
AwlWood Primer Red (1 quart)
amzn.to/3RPzuJN
AwlWood Primer Yellow
amzn.to/3vrHKYM
Heavy Duty Gloves
amzn.to/3U9j4if
Orbital Sander
amzn.to/41W9dhy
Interface Pads
amzn.to/4aM5TcC
Gator 120 Grit Sandpaper (and 320 grit)
amzn.to/4aM61sC
Heat Gun
amzn.to/41R5QZ8
Anvil
www.homedepot....
Tshirt Towels
amzn.to/3TYuKE2
Dyson (I wouldn’t know what to do without it!)
amzn.to/4aTP13K

[@byronsmith1947]

Nice life you have there! Will follow.

[@sprezzatura8755]

If you apply the clear gloss over the primer within 12 hours you will get a chemical bond. This is ideal.

[@petermackay4437]

Should be wearing a mask while applying Awlwood. Applies better with a foam brush.