@@MyGamePlay27use 3BM22. On paper it does seem like 3BM15 has better pen, but it has less ANGLED pen and therefore ricochets more easily, thus rendering the extra pen useless
Just questions AI The 3BM15 and 3BM22 are both types of APFSDS (Armor-Piercing Fin-Stabilized Discarding Sabot) rounds used in Soviet tanks like the T-72A and T-64A. Here are the key differences between them: 3BM15 Penetration: At 10 meters, it can penetrate 440mm of armor at 0 degrees, 360mm at 30 degrees, and 169mm at 60 degrees1. Muzzle Velocity: 1780 m/s1. Weight: 3.88 kg1. Cost: Generally cheaper and easier to obtain1. 3BM22 Penetration: At 10 meters, it can penetrate 425mm of armor at 0 degrees, 360mm at 30 degrees, and 193mm at 60 degrees1. Muzzle Velocity: 1760 m/s1. Weight: 4.83 kg1. Cost: More expensive and takes longer to unlock1. Summary Penetration: The 3BM22 has better penetration at angled armor but slightly less at flat angles compared to the 3BM151. Weight and Spalling: The 3BM22 is heavier, which can result in better spalling (fragmentation inside the target) due to its higher mass1. Cost and Availability: The 3BM15 is cheaper and easier to obtain, making it a more practical choice for many situations1. In essence, the choice between the two depends on your specific needs and the tactical situation. If you need better performance against angled armor and can afford the higher cost, the 3BM22 might be the better option. Otherwise, the 3BM15 is a solid, more economical choice.
7:48 bro's snorkel device is floating 💀
The fastest way to reverse is turning around 😂
that's the best way👌
1:31 when last did u feed the snail
8:00 lolllll
Very capable for overpressure shots, 125 for FIVE kilos similar kilos of an old 152
The reverst speed 😂
😢
weak spot T72 di mana bang kalo lagi one on one depan-depanan?
Should I buy the T72 pre, or should I continue to wait for amx40?
Dont prem the t72 its a average platoon ztz tier 9 much better
But i like the bmp2 It's fun to use
@@katsudonnn Decent enough
How's the t64 and bmp 2?
I think the T-64 is not much different from the T-72A, the BMP-2 is very fun and also good.
T-72 NEVER RETREAT!!!
so which is better between the 3bm15 and the 3bm22.
@@ruckerchen2252 I use 3BM15
@@MyGamePlay27use 3BM22. On paper it does seem like 3BM15 has better pen, but it has less ANGLED pen and therefore ricochets more easily, thus rendering the extra pen useless
Just questions AI
The 3BM15 and 3BM22 are both types of APFSDS (Armor-Piercing Fin-Stabilized Discarding Sabot) rounds used in Soviet tanks like the T-72A and T-64A. Here are the key differences between them:
3BM15
Penetration: At 10 meters, it can penetrate 440mm of armor at 0 degrees, 360mm at 30 degrees, and 169mm at 60 degrees1.
Muzzle Velocity: 1780 m/s1.
Weight: 3.88 kg1.
Cost: Generally cheaper and easier to obtain1.
3BM22
Penetration: At 10 meters, it can penetrate 425mm of armor at 0 degrees, 360mm at 30 degrees, and 193mm at 60 degrees1.
Muzzle Velocity: 1760 m/s1.
Weight: 4.83 kg1.
Cost: More expensive and takes longer to unlock1.
Summary
Penetration: The 3BM22 has better penetration at angled armor but slightly less at flat angles compared to the 3BM151.
Weight and Spalling: The 3BM22 is heavier, which can result in better spalling (fragmentation inside the target) due to its higher mass1.
Cost and Availability: The 3BM15 is cheaper and easier to obtain, making it a more practical choice for many situations1.
In essence, the choice between the two depends on your specific needs and the tactical situation. If you need better performance against angled armor and can afford the higher cost, the 3BM22 might be the better option. Otherwise, the 3BM15 is a solid, more economical choice.
เห็นแล้วช้ำใจ
How do u kill this thing reliably when faced front, even dm63 struggles at its lower front plate
just right at the very top of the lower front plate, it will directly hit the ammo
Shoot at the driver view for onehit
This tank: good or bad?
@@Sønofed_OfficialYTPretty good
@@MyGamePlay27But not reverse speed 💀
First comment:p
Second comment :p