ATS Chemical 505 CRF Fuel Cleaner Review! As Seen on Scotty Kilmer Channel! Engine Carbon Cleaner!
HTML-код
- Опубликовано: 25 июн 2024
- video of me testing out the ats chemical 505 crf fuel cleaner
You can buy the fuel treatment here- amzn.to/49pkBof
please like and subscribe if you find the video helpful! I am trying to grow the channel!
my local dealership keeps telling me they want to carbon clean my engine and they are asking around 350$, In the video you can see there is some carbon on top of my piston heads but I wouldn't say it is anything unusual, most 11 year old engines will have some amount of carbon on the piston heads. In fact, if the piston heads are completely clean that would be suspicious for a head gasket leak as the water from your coolant would be boiling in the combustion chamber and cleaning the carbon.
I apologize as the footage of the combustion chambers isn't the best as I am using a very cheap camera (boroscope). However, I think it gives you a descent idea of how much carbon is there before and after.
Results
I didn't notice a huge change in the amount of carbon cleaned on the piston heads, however the car does feel more responsive and the cold start up noise has gone away. I am not sure if carbon on top of the piston heads is the best measurement of how well this product works
The only other channel I have seen talk about the ATS Chemical 505 CRF Fuel and Oil Cleaner products is the Scotty Kilmer Channel and I have found him to be a very reliable source for automotice knowledge so I figured I would check this product out
I will be doing a review of the oil cleaner in the future so subscribe to make sure you dont miss out on the video
about the ats fuel cleaner from their website
An advanced pour-in fuel treatment that enhances gasoline to remove carbon deposits from the internal combustion engine and engine components. This chemical mixture is proven to remove carbon from; fuel injectors, induction ports, induction valves, and combustion chambers. Carbon deposits on the injectors can cause drivability problems and poor fuel mileage. This advanced formula can clean coking from the port style injector and the direct style injector; increasing engine performance and fuel economy. 
Авто/Мото
This is why I change my oil every 3 months 3000 miles and I drive a 2004 Buick park Avenue with the Buick 3800 3.8L Supercharged V-6 and its super clean on the inside never needed to due this as my car was serviced by the previous owner of 17 years he did it every 3 months 2000 miles 5 to six times a year. The elderly man took religiously good care of the car . I have all receipts he even changed the antifreeze and trans fluid every 25k to 30k mile intervals or every 3 years. The car is 19 years old with 144,915 miles. Fluids and oils are cheap engines and major engine repairs are expensive. Just change your oil every 3000 miles.
I replaced a valve cover gasket on my 2006 Honda Accord (2.4L) 3000 miles ago at 205k (+/-). Visually checked top of pistons and saw minimal build up of any kind. Maybe a bit of speckling, very clean. It was mainly due to a spark plug tube leak which was addressed immediately, the same day a misfire code was given.
Beneath the valve cover, it was clean as could be. No caked on film of any kind. If you wipe with a rag, you get pure, clean shiny metal. Very impressive. This was due to never neglecting oil change intervals, and lots of highway driving on top of that. Changed plugs as well. They were not fouled up, however it was evident while the misfire occured as the one plug had oil residue on it. I cannot stress enuugh to people to not neglect your oil changes!
I just did the same job on a 2001 Corolla (1.8L) with only (129k miles) that had all the same problems except the check engine light was on for months before the problem was addressed. It was also evident that the oil was not changed frequently enough. It was also driven much less frequently, also hardly any highway driving. The oil should have been changed before recommended intervals. In this case time was a factor before mileage was the reason to change the oil. Beneath the valve cover showed a golden and light brown glaze of old oil. Prep and clean up for the new gasket took a very long time. Changed the plugs(All which had, wet, oily threads and were severely fouled with carbon build up and an oil crust), valve cover gasket and fuel injectors.
For the Toyota, I am willing to put a fuell additive to gently clean the inside of the combustion chambers a bit. But a bit weary to put an additive in the oil for over the head, because of what I saw. However I have seen much worse and there were no signs of serioud sludge build-up. But in mu opinion any sludge is scary and a sign of neglect. But the check engine light immediately came off on its own after it was serviced, and the car ran better than it had in a long time.
I have added solvents to the oil in the Honda about two times in 50k miles and would only do it 150-200 miles prior to an oil change. I don't know if this helped. But driving at highway speeds for 30-45 mins at least once a week is very good for any vehicle at minmum once a week. Especially if a majority of your driving is done in the city. Another alternative is to run an entire tank of premium gasoline every other time or 1 out of 3 times you fill up (if mostly city driving). Otherwise you should consider at least adding an oil and fuel additive before fill up on empty or a a couple hundred miles before an oil change. Just dont overdue the additives. There is a formula to apply with all of this stuff honestly. It all depends on how well you keep up on preventative maintanence and how often you drive and what type of driving you do (city/highway). I honestly cannot stress paying attention to these enough. It will save you so much hassle in the long-run and keep your car running wonderfully. You shouldnt look at how many miles your car has vs a car that has fewer miles that is driven less and neglected. They are meant to be driven. Cars will rapidly develop issues if they aren't driven at all and sit for months at a time.
The most problematic vehicle I ever bought was only $400, eas clean looking, but an older vehicle, but had less than 50k miles on it. It sat around all the time waiting to be driven when the owner visited in winter time. All fuids start to breal down and seperate, leaks occur, things started to fail.
Drive and maintain, repeat. Drive less, maintain even more, repeat.
thanks for commenting, if you have not already please subscribe to see future updates and have an awesome day
thanks for commenting, if you have not already please subscribe to see future updates and have an awesome day
Except synthetic which is every 5,000 right? Or no?
Flush the brake and steering fluid to keep your car safe too.
Did full bottle treatment on my 2014 Cruze TDI. 280,000 mi. Reduced black diesel smoke. Improved 2.3 mpg. Greatly improved power and as a result improved shifting. Been over 6 mo and still runs better than before treatment. Will do it again on next oil change
i have also noticed an increase in mpg by about 2, thanks for commenting and subscribe to see my update video I am doing soon
@@MoOutdoorsandReviews where can I purchase some of this?
@@vladimpaler9274 only on line through ATS...... I just got on their in stock notification list.
280k miles on a Chevy? Unbelievable
@@KC1986JRProbably the third motor and trans lol
Did not neven know locking extensions existed. Thanks for that recommendation!
for sure, thanks for commenting, make sure to subscribe for future updates and have an awesome day!
Outstanding review. I really like your calm, pleasant tone and patient delivery. I have a 2011 Honda Pilot with 170K and use the 505 CRF about once a year. It truly runs close to like new with great acceleration and no oil burning between changes which I do every 5K. Thanks man!! I plan to take my Honda to 250K plus.
I used the ATS chemical 505 cro oil system treatment in my 2014 Hyundai sonata 2.4L. As you know these cars are notorious for burning oil out the exhaust in the form of blue smoke. Since I did the treatment and changed my oil, my car went from 23-24 mpg to 28 mpg. I am now 800 miles into the fresh full synthetic oil change since the oil system treatment. I check the oil dipstick constantly. It has been 800 miles of driving and I have burnt no oil. I still have the same level on the dipstick, a smidge over the F dot on the dipstick. Before the oil system treatment, I was consuming at least a quart by this point, now I' am consuming no oil. I also experimented on my 2010 Hyundai accent gs with 176000 miles on it. It has burnt oil ever since I can remember, to the point where I had to add a few quarts between oil changes. I added 4 oz of marvel mystery oil to the crankcase and drove it for 200 miles and then changed the oil and filter. I have now clocked 700 miles since the oil change and the dipstick shows that it's still a bit above the F dot on the dipstick as well. I hope this information can help other people.
glad it worked, thanks for commenting, make sure to subscribe to see more and have and awesome day
My 2006 Corolla has suddenly started getting less miles per tank than before. I’m gonna try this stuff and the oil system cleaner before my next oil change.
it improved my mpg by about 2mpg, went from 24.8 to 26.7 (measured by the cars computer), I will be doing an update video soon, subscribe so you do not miss out and have an awesome day
If you can find an ethanol free pump near you , try that. Although it will be more expensive. The price may not offset the benefit in fuel mileage. But your car will run a lot better.
I noticed my V6 Honda engine barely sips it when running about 50/55mph I barely touch the pedal.
Never really got that with the 10% ethanol stuff.
@@TheAgentAssassin Thanks. I will definitely try that.
@@TheAgentAssassin Straight 100% gasoline will be about 10% more efficient. Cost difference from 90/10 versus 100% is well more than 10% where I am.
This is really designed to clean up your injectors and also LIMIT carbon build up. A good test to show this, on an older car, would be to show the long term and short term fuel trim before and after. And also MPG before and after. Good video!
ill do that next, make sure to subscribe so that you do not miss out and have an awesome day
I found your video because I’m a fan of Scotty and I’m glad I did… Thank you for the honest review!!!! I don’t trust these products to deliver on what they promise and I wonder if repetitive use of a cheaper one like sea foam would actually be better than spending a lot of $$$$$$ in an overpriced one…
Liked and subscribed…..
that is awesome, thanks for subscribing and have and awesome day
Seafom is garbage
Thanks for demonstration and results. What did the bottle say about "up to the amount of gallons of gas this treats"?
treats up to 20, subscribe for future updates and have an awesome day
Definitely trust Scotty’s judgment. Good video
thanks! make sure to subscribe to see more and have an awesome day!
I remember Scott Kilmer rising RPMs for several minutes.
that is what i did, thanks for commenting and make sure to subscribe and have an awesome day!
Thanks for letting me know which bore camera NOT to buy...!
lol, i know right
THANKS for the honest review! Looks to me like that additive that costs $60, did little more than if you dumped in a bottle of Techroline. The main difference is the Chevron product costs $10. Also IF you didn't feel like the first time adding it to the gas actually achieved anything, you could just try it a couple more times to give the cleaner more time to work however well it is going to. But at $60 per nobody in their right mind is doing that with the 505 product. Also the ATS people give no option to just buy either the fuel cleaner or the oil cleaner, you have to buy both of them. Think I'll stick to techroline and do the frequent oil changes really
I just pour 5 oz sea foam in the crank case and the rest in the gas tank. Never had any issues.
@@abdullahal-shimri3091 Well that's one approach - Honestly I feel obliged to warn you against leaving any kind of solvent product like Sea foam in your oil for long. In fuel yes, Sea foam probably helps clean the engine a bit and I add similar products all the time. But from bitter experience of 40 years in automotive work, I don't add Sea foam to the oil and then run the engine, unless I was changing the oil afterwards. Seafoam has no lubricating properties, after all, and will do no good for the rings, camshaft, or bearings as a result. The only product I feel comfortable flushing my engine with is doing a couple of oil changes and short interval, with the cheapest engine oil I can find.
If an engine were so sludged up inside that running a solvent was needed, I'd want to at least drop the oil pan and valve covers and clean off whatever I found inside. Then put it all back together and do several oil changes within 100 miles, then reduce my oil change interval from then on.
I agree with this. I have a 2017 5 speed manual Nissan Versa with 110,000 miles on it and it runs like a new car(I use high mileage oil on it) and a 2009 Honda CRV with 104,000 miles on it and it too runs like a new car(Full Synthetic oil for it). If one keeps that oil changed regularly, one will avoid some costly repairs. In fact, all I've ever done is brakes, tires, filters and oil changes.
@@gregzeigler3850 LOL that is not a lot of miles these days....maybe 70 years ago but that is nothing these days.....
Seafoam is a joke, MMO or BG
I’ve used Amsoils fuel cleaner/ treatment and it actually works. In conjunction the fuel I use is either Shell V power 91 or Chevron Reg or premium it doesn’t matter with Chevron. But check out Amsoils fuel treat or if it’s too expensive I also suggest BG 44K.
I will, thanks for commenting, make sure to subscribe to see more and have and awesome day
Just used this stuff and it was a waste of time honestly
I have alot of carbon build up in a magnum dodge ram and it didnt touch it
My Go To - Hard Core Cleaner is BG EPR
I’ve looked in my area Cincinnati northern Kentucky area for a service center that uses the ATS 3 C cleaning machine and also emailed ATS directly several times to ask if there are any within a 100 miles or so of me. They have not even bothered to respond. I have 2 cars with gdi engines. I used this treatment also. I’m curious to see the oil treatment video. Thanks for doing these!
thanks for commenting, will have the oil treatment video up next saturday
I did reach them- They won’t share who bought the machine… I think for privacy and liability; they don’t disclose their clients. They NEED an opt-in list online so shops that have bought their machine can list themselves online!
I think I still have a can of BG44K. I will photo my cylinders before and after treatment to see if there were any affect using this stuff.
They suggest using it in a 1/4 or 1/2 tank of gas. On the fuel system cleaner.
uug- he screwed up… 1/2 the potency, invalid tSt👋😔
Confused. The website says it treats 5-20 gallons of gas. I did not see what you stated about using it with 1/4-1/2 tank of gas.
@@Methodical2 the original website had it in 5 gallons of gas. I guess that got enough people confused that they have simplified it to put it in the tank.
I’ve found is very high priced for the results you get. I bought a case and tried it in a bunch of different cars. It really didn’t perform any better than chemtool B-12.
@@texaspowerman Sounds good. I will keep B-12 in mind if I need to use this stuff. I will visually check my 94 Ranger to see what it looks like in the cylinder bore. If dirty, I will try this stuff.
IMHO, as long as you are using Top Tier gasoline (Arco, Chevron, Shell, Costco, Exxon, Phillips 66, Texaco, Mobil, etc.) instead of the cheap stuff from Corner Bob, you'll be fine. You won't need those additives and other snake oil products.
Top Tier fuel is recommended by: Audi, BMW, GM, FCA, Ford, Honda, Toyota, Mercedes-Benz, Navistar, VW and Detroit Diesel. Those vehicle manufacturers write and enforce the Top Tier standards.
Full disclosure: My four year old VW has been on a steady diet of Shell with no issues.
Same goes for engine oil. Change it every 5K (dino or synth), or every 6 months, if you drive less than 5K.
I just realize we have ethanol free gas down the road from me. I'm using that from her on out. My SUV runs better on it.
thanks for commenting, subscribe to see further updates if you have not already and have an awesome day!
thanks for commenting, subscribe to see further updates if you have not already and have an awesome day!
My GDI sounds like a diesel ......! If I keep the oil high and use 91 octane it doesn't.....
Carbon on the pistons is not a big deal. Carbon embedded in the the rings is. No cleaner will fix that. Too much oil burning in that case. This product is used to clean the injector nozzles. Help with better atomization of the fuel. Your test will not show that.
for sure
Except for the def system, chevy actually did a good build on the Cruze diesel. Over 300,000 mi on it now
for sure
This works
its does! thanks for commenting, make sure to subscribe, and have an awesome day
Scottie's got me curious as well. Shouldn't this be added right before a fill up, at the pump, in order to mix better? While the motion of the car will mix it, it seem like it would take longer to mix and possibly even create hotspots while burning through the cats in the meantime.
thanks for commenting, subscribe to see further updates if you have not already and have an awesome day!
Yes. Dump it in the tank at the fill station, then fill with fuel.
They actually say it works best when your car has 1/4 to 1/2 a tank left.
@@seanm2216who?
Great video, after 110,000 miles, I replaced the ignition coils, spark plugs; runs much smoother and the check engine light turns off, but slight vibration at redlight, any suggestions? Is this a carbon issue?
it could be the battery, make sure your battery cables are tight, could be the alternator, my alternator just failed at 112,000 miles
Man, clean that engine compartment.
Ok, I need to update my comment to be fair! I finally did get the product in that I ordered. Plan to try it out soon and will post my results. I'm really hoping it works! Supply chain issues and building back is *%^&#&!
I have a Chevy Metro with 275000 miles. I was getting detonation with 87 Octane so I was having to use 89. After using this ATS 505 (oil version) , I can use 87 octane again no problem. Did the carbon get cleaned? I do not know how much, but enough got removed to where I can use 87 octane again.
Any update on this product works? Thanks in advance.
how long did it take to ship? Been 2 days and still no shipping notification. Just wondering
Unfortunately vide0 Eye is no longer with us.
thanks for commenting, subscribe to see further updates if you have not already and have an awesome day!
Mmm, I think the real test would have been to see if the fuel injectors were improved. That slight amount of carbon on the pistons is not really a thing to worry about, but the injectors are. Of course that would have meant pulling the injectors and spray testing them before, and after using the cleaner, which just about no one can do at home.
Looking forward to the oil treatment vid.
thanks for commenting, yea checking the injectors is a little bit over my amateur mechanic skill level, the oil treatment video has already been posted, check it out
@Biz Wize absolutely. Normal amount of carbon buildup. You wont see any difference in carbon cleaning if there isnt a crazy amount of carbon. Yep, the fuel injectors might got some cleaning, but you dont really know til its tested. If you follow scotty, ur car is probably in great condition.
Doesnt carbo build up cause engine performance efficiencies and cause bad component failure
@@JuanRodriguez-gj5zk you cant get rid of all carbon, carbon is always building up, cant avoid it, its the result product of combustion, kinda like ashes when u burn a piece of paper. But you can avoid large amounts buildups that can potentially mess the engine performance
You should really be checking the manifold side of the intake valves. That is the main problem area with GDI engines. Carbon builds up and reduces air flow into the cylinders.
Is this better that the gumout you had recommended?
way better, subscribe to see see more and have an awesome day
Can you add the oil treatment and fuel treatment products at the same time?
yes you can, do the oil treatment with the oil change, then pour the treatment into the gas tank
the fuel additive cleans the fuel injectors
thanks for commenting, subscribe to see further updates if you have not already and have an awesome day!
I wonder what the valves look like...that is where I expect a lot of improvement...
maybe in a future video, I just bought a better camera, subscribe and stay tuned, have an awesome day
When scotty used it he followed instructions on the bottle. He said you had to hold or prop the gas pedal to maintain a certain RPM for so many minutes. Just adding it to the tank and driving the car would not get maximum results.
hey, i think you are referring to the oil treatment, this video is about the gas treatment, I also reviewed the oil treatment, you should check out that video and subscribe and have an awesome day
@@MoOutdoorsandReviews yes you are correct, thanks.
@MO Outdoors and Reviews! even with the gas treatment is good to run it harder than normal....run it at higher rpms at the least.
But on the site it said for best results to use it with the tank being from 1/2 to 1/4 tank full. Still great vid
great video, earned a subscribe from me
thanks for commenting, subscribe to see further updates if you have not already and have an awesome day!
For fuel treatment is cyclo max 44 just as good? I can't get the ATS crf.
hard to say, I think most fuel treatments, including this one do not work very well, oil treatments seem to work better
BG 44k is the best, 2nd best is Redline fuel treatment, and Royal Purple is also good
Thanks I'll check.
Do you add the 505 CRF before or after an oil change?
before
This is an old video but if you added the cleaner to the tank after fuel up it didnt do any good, always add any cleaner before you fill up so that it gets thoroughly mixed
No
Will this clean out exhaust? Catalytic Converter etc?
I do not think it will clean out the exhaust or catalytic converter because they do not advertise it as doing this, I would buy a product specifically advertised to do this (there are several, I know crc makes one)
I heard paint lacyer( thinner) in tank will do it
i like BG 44K
Friend of Scotty I take it
just a fan, appreciate you checking out my channel, subscribe so you don't miss out
@@MoOutdoorsandReviews are you going to send me some of the ats additives ? Like you have Scotty Kilmer ? 😂
@@catslivesmatter1268 i am still waiting for my sponsorship offer
@@MoOutdoorsandReviews okay just wondering because Scotty has been building you up 😂 love that Scotty Kilmer though
where did you buy the 505CRF?
on line. Google ATS 505
if you google it several places to buy it come up
Should have known that Scotty was pushing snake oil.
for sure, make sure to subscribe to see future updates and have an awesome day
great video, definitely earned a subscribe from me
thanks for commenting, subscribe to see further updates if you have not already and have an awesome day!
Did the car run better? It's really the injectors this is meant to clean.
it did run better, I increased my mpg by about 2mpg and noticed increased responsiveness, thanks for commenting, subscribe to see more if you have not already and have an awesome day
Before video and after video of cylinder 2 is the same video… why?
just trying to trick you, make sure to subscribe and have an awesome day
You can only get there product form there website? If so can you send me the link you got it from?
thanks for commenting, it is usually sold out but you can usually find it by googling ats chemicals, subscribe to see further updates if you have not already and have an awesome day!
Unless you use the ATS machine, walnut blasting is the best way.
for sure
Get Redline. It had the highest concentration of PEA
will do, ill do a video on that next, subscribe so you do not miss out and have an awesome day
Fuel treatment should help with the combustion chamber. Project Farm seems to have good opinion on Seafoam.
If oil is getting in combustion chamber, perhaps a new PCV is needed. They are fairly inexpensive and are not too difficult to replace.
yea i wish project farm would review this product, thanks for commenting, subscribe if you have not already and have an awesome day
Where can I buy this online 1 bottle at a time?
hey I think it is currently sold out everywhere, if you google it and look at the shopping tab it shows you what websites are selling it, I will be doing an update video soon, subscribe so you do not miss out and have an awesome day
Have to buy it by the case?
you can buy it in a two pack on their website when it is in stock, thanks for commenting and make sure to subscribe for future updates
You’d need to use the CRO to see any carbon cleaning in your engine. CRF is for your fuel system and probably just cleared up your fuel injectors.
Did you ever use the CRO?
i did, here is the link, thanks for commenting, subscribe for future updates and have an awesome day
ruclips.net/video/8bmOr6e-biYi/видео.html
Instructions say to use the fuel treatment with a quarter tank not full
that is correct, subscribe to see future updates and have an awesome day
Has been a year. Did the gas milage improve?
I did see mpg improvement of about 2mpg
Ordered this product along with a bottle of the CRO for crankcase carbon cleaning. Long story short, my CC got charged right away then not a peep from ATS for 6 weeks. Finally, a couple weeks after I had my CC company reverse the charges the stuff showed up. Maybe it works, maybe not but one thing for sure the order processing/ customer service from this outfit is horrible.
thanks for commenting and letting the people know, make sure to subscribe to see future updates and have an awesome day
Yeah I got that Vibe too. Why wouldn't they just stick it on the Amazon if they can't Market it well.
Where can I buy it??
if you google it there are several online retailers that sell it, I do not think there are any brick and mortar stores that sell it, will be doing an update video soon, subscribe so you do not miss out and have an awesome day
Why can I only see half the screen.
im not sure, please subscribe so that I can up my production quality and have an awesome day
How much you pay for product ?
hey I payed 60 dollars for the two pack of cro and crf
Dit product kan je niet kopen in Nederland!Wil jij dit misschien voor mij kopen?🙏🏻🙏🏻🙏🏻
thanks for commenting, if you have not already please subscribe to see future updates and have an awesome day
Looks like hella carbon
for sure, make sure to subscribe to see more and have an awesome day!
ATS Carbon Clean is a rip, ordered over 100 dollars of product back in March and still haven't got anything. Called them and they said they send it weeks ago. Now all you get is voicemail when you call!
You said the same thing on the oil video
I had the same issue. I complained via email and threatened to cancel and my product showed up three days later with an email from them stating they had sent me an email confirming my order that I just didn't receive. Lol. I think they are overwhelmed and forgot to finish processing my order (it was processed this morning) the day the product arrived.
I'm going to test it out now.
I know this is a year old, but I received mine in less than a week in March 2024. I'm hoping it will help clean my worn Injectors on my '03 Ranger with 251,000 miles on her....
I ordered mine months ago, no product, no response to emails or calls, a bunch of crooks.
I ordered mine 11-4-22,Just received today
@@redskinman0 Congrats! I hope it works well for you, please leave a review. I received mine today too, only after my attorney sent a demand letter. Really? They couldn’t answer a fricken Email or phone call? I of course won’t be using it, I don’t trust that company, but I hope it works well for you George, please let us know and good luck 🤝
@@sdcoinshooter I called last week and left 2 voicemails and also sent a couple emails,never did hear back from them,then received my order today,coincidence? who knows
@@redskinman0 George, I just got off the phone with ATS CHEMICALS, which is the parent company in Alburquerque. It is the distributor, that uses ATS logo, that is the non-responsive and lousy company. ATS itself just found out about all these complaints and is sending out orders from their manufacturing plant. He apologized profusely and said they were considering dropping the distributor, considering all the problems they are causing I think it's a great idea. When they find out about customers like us, they send us out the order from their own stock. I was impressed with their concern for their customers and sorry this distributor is causing them so much grief. He said Scotty had the distributor website on his videos, and they have reached out asking him to correct it, but order directly from the ATS chemical site from now on to avoid this problem. Let's see how this stuff works!
No communication or updates for me either, going on the end of week 3. Which contact number were you able to get a hold of someone with? Im looking at canceling my order too, but either way, ill never order another thing from this company.
didn't see that much difference
thanks for commenting, subscribe to support the channel and to see further updates and have an awesome day
Looks to me, it didn't work
I noticed increased throttle response and increased my mpg by 2 mpg, thanks for commenting, if you have not already please subscribe to see future updates and have an awesome day
Looks the same
thanks for commenting, subscribe to see further updates if you have not already and have an awesome day!
No one has it in stock!!!10/16/22!🤬🤬🤬🤬🤬
that is too bad, I will look into it to see what is going on with the company and post an update video, subscribe to see more if you have not already and have an awesome day
The ATS website had an option to be on a waiting/notification list. I got an email about 2 weeks ago...and my CRF/CRO two-pack came to me yesterday! Seems to be back in stock now!
@@cpsullivan69 thanks for the info and subscribe for updates if you have not already and have an awesome day
Scotty does not know whats causing the carbon build up problem.
That product is not working.... Its not worth the money.
yea i think I agree
@@MoOutdoorsandReviews Improve the Air Release Properties in the fuel.
Pump Diesel and Gasoline both absorb Air like a Dry Sponge absorbs Water.
Ox-Cetane greatly improves the Air Release properties in the fuel.... It makes the Fuel more Dense.
Only 10 ppm air in the fuel results in a loss of 10 % in fuel economy.
Let the Fuel clean the dirt out of the Engine.
figures nothing works lol
this is true
What a ridiculous price for this dubious product. Not gonna buy this pig in a poke. One thing is for sure. The sellers are gonna be happy if you buy it.
thanks for commenting, if you have not already please subscribe to see future updates and have an awesome day
Isopropyl alcohol! Cheap as hell. Best fuel injector cleaner on the planet!
do you just pour it in the oil and run it for 20 minutes like I did with this product
Add a quarter of a bottle to the gas tank.
Another mouse milk product.
Which site did you use? I saw 2 sites ATSChemicals and Atscarbonclean.
i bought mine off a third party site, pelicanparts.com, make sure to subscribe to see further updates and have an awesome day
Well i can tell you ATScarbonclean isn't responding to emails and i haven't gotten any shipping updates thus far, at the end of week 3. Stay away from them unless you want to lose money.
@@_DeFiNiTeLy_Not_BrAd_ thanks for the info
@calualu #music