Have used smilefast with heated paste but not with GUI - I know that Mide and Tom tested a lot of composites before deciding on their protocol - I would be too chicken to try! Have you tried?
I love your stuff. The comment about injectable to bulkfill is an unfair comparison because bulkfill usually requires a cap if used in areas of occlusion. I still agree that it is a great conservative treatment option though! 😊
Im having bubbles on my exaclear when i take impression on my asiga printed model, seems like the resin is not compatible with the clear putty, so i have no choice but to duplicate the printed model, to stone model, then only i take the exaclear inpression, defeat the purpose of speedy digital waxups.. any ways to overcome this?
Hi Edelweiss - sorry for the delay while I asked Dr Kostas about this. This is what he suggested: Bunbles in exaclear form usually because its is not pressurised in a pressure pot. When pressurised its clear as glass. Printed models can interact with PVS but i ve only seen that with putty/wash stents (mockup ones) rather than exaclear. If bubbles dont come onnstone model but they do on Asigas then its the cleaning of the model… i get all my stents made on Asigas (solid models, not hollow) If bubbles come on both stone and printed then its the pressurising issue Hope that helps - as you can see Kostas is a genius geek!
Hi Cavan ho, G-aenial universal injectable can be used for Class Is (as well as Class IIs!) - I personally would not use it in a bulk fill way - still better to place increment by increment in a 'stress reduced' manner. Shrinkage is comparable to other flowables (3.4%, whereas SDR is 3.9%) but more than paste composite. I know some great dentists who have been using flowables for class Is for several years personally.
So about to my first injectable case today. Excited
hope it goes well!
Jaz - have your ever tried using a smilefast stent but use the gaenial flow composite? Best of both worlds?
Have used smilefast with heated paste but not with GUI - I know that Mide and Tom tested a lot of composites before deciding on their protocol - I would be too chicken to try! Have you tried?
@@protrusive I will soon Will keep you updated
@@protrusive
Tried it today. Worked really well. Gaenial flow does have an air bubble problem
But overall a fast efficient way of doing things
Hi I need this work done and I live and Canada can you recommend some one in Canada.
check out dmdsunny on insta
I love your stuff. The comment about injectable to bulkfill is an unfair comparison because bulkfill usually requires a cap if used in areas of occlusion. I still agree that it is a great conservative treatment option though! 😊
that's a very good point, thank you doc!
Does gc injectable A1 has enough opacity to restore a class IV restoration or i need dentine composite layer beneath it .
?
sorry for delay! In my experience you need to cut back and layer as it's a little on the translucent side
Is it suitable for excessive wear cases where we need to increase OVD?
yes - all in the planning (occlusion) and ensuring adequate thickness and setting the restorations up for compression and not tension
Capping karane k baad injection moulding treatment possible hai kya rct nahi kia hai 1 month hua hai irritate feel ho rha hai...
capping as in crown? mushkil hotha hai composite ko crown ke upar lagane mein- leikin baki daand (enamel) possible hai. Sorry if my hindi sucks!
@@protrusive sir crown remove after injection molding treatment possible hai kya...
@@ManishYadav-ol4bx removing composite? Yes and can use UV light to help.
really really good
Interesting 🤔💥🏆💥♥️🌹
Im having bubbles on my exaclear when i take impression on my asiga printed model, seems like the resin is not compatible with the clear putty, so i have no choice but to duplicate the printed model, to stone model, then only i take the exaclear inpression, defeat the purpose of speedy digital waxups.. any ways to overcome this?
Hi Edelweiss - sorry for the delay while I asked Dr Kostas about this. This is what he suggested:
Bunbles in exaclear form usually because its is not pressurised in a pressure pot. When pressurised its clear as glass. Printed models can interact with PVS but i ve only seen that with putty/wash stents (mockup ones) rather than exaclear.
If bubbles dont come onnstone model but they do on Asigas then its the cleaning of the model… i get all my stents made on Asigas (solid models, not hollow)
If bubbles come on both stone and printed then its the pressurising issue
Hope that helps - as you can see Kostas is a genius geek!
Is it suitable to use G aenial injectable for occlusal molar cavities, kind of like a bulk fill? What’s the shrinkage like?
Hi Cavan ho, G-aenial universal injectable can be used for Class Is (as well as Class IIs!) - I personally would not use it in a bulk fill way - still better to place increment by increment in a 'stress reduced' manner. Shrinkage is comparable to other flowables (3.4%, whereas SDR is 3.9%) but more than paste composite. I know some great dentists who have been using flowables for class Is for several years personally.
Love the information but there are no clinical cases. I think you should have more clinical and technique than just talks. Gets very boring
Thanks - although this is a podcast streamed to Spotify/Apple, hence the interview style.