I'm a new CNC student..my professors are top notch industry pros with decades of experience. But teaching isn't his best asset,,I've learned as much from this RUclips channel in the last weekend as I have in 4 weeks of school. You guys are great and helping this noob out more than you'll ever know..
I’ve been programming for 20 years and have to say that this is a very good explanation of the basics. Very well done. You’re a great teacher. I look forward to watching some five axis vids.
@@marsel8718 Confidential, usually. In my company no-one knows what a worker next to him gets. However, working 40h weeks and negotiating the best i could, my monthly wage was €830. It d
@@marsel8718 Omg. Sorry I didn’t see any of these comments sooner. To be honest, it all depends on how far you want to take it. If you get into being in applications engineering for a machine tool company, you could make close to 200,000 a year. Depending on how much you work otherwise, it depends on the position you hold I am a machine programmer, but I am also the Director of manufacturing and engineering at my company. So the sky can be the limit. Just go for it!
Thanks at least for the fact that the company not only sells its products, but also shares useful info with others. Personally, I thank you for helping to understand the essence of the CNC without breaking the damn cutters.
I prefer a fellow human being who is educated and busy than a person who is stupid and unemployed and uneducated walking around the world and growing like a weed hahahaha! ................ I think: Haas colleagues also understood that education is the power ... to have a better society around us! ..... The other way round, be cursed, who want to avoid it through internet filters!
Thanks Mark, I enjoy your tips. I'm a back yard manual machinist that has the CNC CERTIFICATE. But have never worked in the CNC trade. Mainly because my regular gig pays well and too close to retirement to start at the bottom of the food chain. I have manual machines but I can see a cnc mill in my retirement plan. The desktop Hass CNC machine realy peaked my interest. Trying to figure out how to break the news to my wife I want to buy another $8000. Toy for my shop without causing permanent damage to our 43 year marriage. You would think she would be used to my propensity for expensive toys by now. You are a great teacher.
Decades ago I setup/ran and programmed a VF-2 . I had years of manual experience and a few years with a conversational cnc mill. When I was asked to run the Hass I was the only one there that had cnc milling experience but no g code experience. The Hass programming book was just a wealth of information that within a month I could program anything that the machine could possibly do. It also had a rotary 4th axis that I used on occasion. On line support had very useful information I could use also. Everything was easy to understand. I even did some hard milling on it and saved a tremendous amount of time vs surface grinding. We didn't have Cam at the time so all hand typed in but it wasn't difficult.
I have programed ISO for about 5 years and then i met Haidenhein ,from that "Day" i never go back to ISO again...... But i enjoy the channel here.....you got some good tips here and there... :-)
I wish you would have taught all of my classes in high school. What an excellent teacher! My husband is an operator and they have been promising to teach him to program for 3 years. Over the years he has figured out some basics and can modify, etc. I just forwarded him this tutorial, he is going to love your stuff!
Love it, no one have ever explain the basic of gcode like this way before. its great. I am going to watch all other videos of you Sir. Keep sharing knowledge for learners like me. Thanks again.
I will have to say thanks for the tips. I am working in a prototype shop with one other machinist who finished school a year before me (I only finished the program last year with the CNC certificate on top of my machining diploma) and having nobody with years of experience to help with the transition from student to machinist has been somewhat interesting. We run Haas VF3, TM2 (usually me running that one) and a TL2 (have been spending a lot of time on it over the past few months and have earned the title "lathe guy" from some of the engineers), so learning simple tips like what you show are always helpful. They are even more useful as I plan on returning to my school as a part time teacher (only requires 2 years minimum experience), so several things from these videos will be going into any CNC classes I end up getting involved with or just generally helping out students that are in those classes. Can't wait to learn more to improve upon my knowledge for better ways to have parts coming out of the shop.
This is exactly what I was looking for to help me know what path to take for learning CNC. It feels like there is so much to learn and this is a nice starting point. The ending also helped me know what to do next, thank you!
I am currently learning the old Haas SL30 at my job. I am freshly graduated from 4-year machinist apprentice school and am soaking up as much CNC knowledge as possible. This video series is awesome. Definitely need this. Subscribed!
@hassaanawan9606 I've never been to a class for cnc 6 years experience running varying machines from crap lathes and mills to extremely nice lathes and mills. I make 32 a hour. Average about 80k with ot. Think I got like 84 last year this year we got less ot so a little less. Hoping to get a little higher wage soon and break that 100k mark. Alot of machinists / operators make less than me though. I even make more than half of the journeymen make in our shop. Seattle area just to give you a reference point. If you want real money get into hvac lol
I just got a job in the field, got put on a Haas making simple parts, I want to know how as much as I can. I'm in school as well so I feel like a deer in headlights somewhat. Great video, thanks.
When I learned CNC programming back in 1991-1993, we started with this. We programmed the CNC and had a pencil in the tool holder. If we have programmed the program correctly, we had our picture.
Mark great video. I kinda did it backwards. I'm an engineer by trade. Didn't know a thing about CNC. Learned a bit on a chinese CNC i bought to learn the basics (using MACH 3 then) until I just went for it, quit my $140,000+ job and opened up my shop running a VF-5SS. Crazy scary. I relied heavily on my CAM system and it certainly got me through since I didn't know G code. But as the code is posted, I've been taking the time to understand more of what is being spit out, especially the G and M codes. Videos like these definitely help with that so thank you. Don't be mad because I learned G code backwards though :( lol I'm sure a basic program can be written by hand pretty quickly, the conversational programming is pretty good as well. But more complex toolpaths, especially 3D surfacing would be a nightmare to do by hand. Because of my background, I know CAD/CAM extremely well, with my G code knowledge growing slowly. But I think they are mutually exclusive. It does make you a better programmer if you know both though. Keep up the good content.
Cisco Hernandez I programmed for only a couple of weeks by hand before jumping into a CAM system, and never looked back. If you had just 100 hours to learn to run a CNC, I’d spend maybe 5 hours on these basic G-codes, 10 hours on setups (making things straight, setting offsets, using an indicator/probe), 10 hours on tools (drills/end mills/taps..) and their speeds and feeds then the remaining 75 hours getting to know my CAM system. I just made this schedule up, but you get the idea. The way you described learning things through your CAM system is a solid approach. We only have so much time - Mark
@@markterryberry4477 Completely agree. When I was in the engineering world, we were design aerospace systems for Space X, Boeing, Lockeed, Northrop, etc. I got to test some of the equipment in the field, but man, my attention was always on the floor. On my own time I'd go an talk to the operators to pick their brain. Some had 30 yrs of experience! Are you kidding me, there was no way I'd ever learn what they knew on programming manually. At that time, the idea of running my own shop was so far fetched, this was in 2012. As channels like yours, NYC CNC, Titan and other started to come out it certainly has made it possible for guys that have no experience to jump in and learn. It's been a hell of a ride and the learning curve is steep as hell, I have had some very expensive mistakes but man am I happy. The business is growing and my experience with it. Fortunately, I have been able to stay profitable. Once again, thank you for all the content. I live in California so maybe one day we'll get to meet to discuss things more in detail. Keep em coming!
@@ciscohernandez4384 I know this is a very old comment but you learning that code is not only valuable for making money but the guys on the floor respect you so much more if you know what you're talking about and can work through something with them.
@@MrNinjaman63 Very true. During the time i've been programming I'm certainly polishing my skills understanding more of the code and getting deeper into post processors. And well it also helps I'm the owner of the shop lol. Either way, in my experience it's more of a people thing having the floor's respect vs. knowledge. When I don't know something I don't hesitate to ask and operators have absolutely no problem walking me through the ropes. They help me in some areas I help in others. Thanks for the comment
in 1980 where i was working the older machinist got to learn to run the new K & T cnc mills. to say we had a steep learning curve is a big understatement. these new machine couldnt interalate going around a corner. we had to input point to point by hand.
Super handy to know if you're running a simple one-off part and don't have time to CAD/CAM it or if you need to debug a program. Also, the tool change commands are helpful on older machines when setting up or changing out tooling. G-code IS still relevant and useful to know!
Most if not all CNC's still run on G-code so it's absolutely helpful to know it when problem solving and making small changes so you don't have to create an entirely new program on CAD.
I hit the like button and I also like you I find you are an excellent instructor I enjoy your videos very much I am learning a ton of stuff thank you from Canada 🇨🇦
Thank you Mark to share all of your knowledge with us. I never missed one. This had been helping me a lot all of these years. God bless and continue educating us.
I found this video to be very informative, i'm just starting to learn G-code and i'm looking for any short cuts that i can get. I'm a visual learner so videos are great for me.
So I’m taking an assessment for Cnc bender after my 3rd day tooling parts. I’m nervous because I really want to do this but afraid of being turned down. I know nothing about the machine. But. I was pretty good in algebra so hopefully it’ll come back to me. I am going to study these codes so it will help me a little. Wish me luck guys
@@imaamericangirl1406 I can’t believe how much has changed since then lol. I was told I was going to take the assessment and they never came and got me off the floor so I left and now I have 3 certifications with the department of agriculture and rural development and currently get rid of your skeeters
Very useful program and I have to say, straight to the point. Love your content and it really is that simple. I am a huge fan followers. Thanks for the knowledge and for showing all that you need to know about CNC. Please like and subscribe. You will NOT be disappointed.
#VeryCool! #ThankYou! for keeping it positive. This video shows what is possible if we all try to get the best grades in school. Please in the next video give a shout out for all those who are coming up. By shooting out "YA HOOOOO!"
Great videos! We recently had a new VF2 installed and it's amazing just how closely it matches out now ancient VF2 from the late 90s in terms of control. Made it easy for me to transition over, taking in to consideration a few new buttons and a fancier display. Would love a CAM system. We free hand all our programming here, but are looking to invest in that at some point. I dont know how any of that works but I would love to learn, sounds like the way forward and a huge time saver I bet
Everything Mark says really helps. People have no idea how valuable these videos are. People work their whole careers and can't handle half this stuff.
Jonathan Graham I’m gonna get personal so please try to bear with me: I honestly didn’t know what I wanted to do with my life- Machine Tool Technology just sounded "cool" so I chose that as my concentration for my community college (I completed my gen ed courses before I started the MTT program). About this time last year, I started my first project in manual and something just clicked. Now that I’m done with the manual shop classes, I’m currently in my first semester of CNC- milling is taught in spring & turning is in the fall. CAM is in summer but I can’t take that till I’ve passed either CNC milling or turning. Anyways, to sum up what my above comment was about: I definitely know my Cartesian coordinates and am pretty confident in my blueprint reading skills. What I need to work on is what to put on each line of code. Also, I have add/adhd which probably contributes to the fact I’m mostly a hands-on/visual learner (so yeah these vids help) but I won’t let my so called "disability" stop me from becoming the best CNC machinist I can be. I wouldn’t have chosen this as my career choice if I didn’t think I could do it. Alright I’ve said enough. And to any CNC machinists who might’ve been in the same boat as me at one time, I’m looking forward to joining you on the summit
@@stuartpeck26 Good on you for recognizing what you're interested in and striving to understand it on your own time as well. You may or may not end up on a Haas machine when the CNC classes come around but no doubt you'll learn lots to start you in the right direction. I came at machining from the opposite side haha. I was the cleanup guy for a job shop and learned all I could watching the other guys. They started letting me do small jobs that had been started already on the CNCs, then let me start setting them up, then start proofing... Until now, I setup and run parts regularly and I'm decently proficient at hand editing G-Code. I wish we had more manual jobs for me to learn on as well, I find myself behind a mill or a lathe about 1/4 as often as their CNC counterpart. But I'm happy to be learning and have a job that makes me exercise both the creative and logical sides of my brain.
@speedytech7 These are the machines in my community college’s CNC training building: 3 MAZAKs- 2 mills (one with 5axis but u have to be at a certain skill level to use that one) and a lathe; 1 Samsung lathe with Fanuc controller; and the rest are haas mills & lathes. I believe our VF3SSY is actually being leant to us. HAAS had a demo day this past summer back while I was in my intro to machine shop 2 class in which they were primarily using it And thanks
While it is important to understand G-code for debugging or fine tuning most modern shops use CAD/CAM and conversational programming. Which with a decent post processor they will handle the structure for you. It's other stuff they can be less then awesome at. Here's a trick as you reading code on the screen use your finger to simulate the cutter and your desk as the mill bed.
Hi.... Dear sir, It's very useful video, Thank you very much. Sir, i would like to know where are you from? I am from India and working as CNC mechine oparator. I like your video very much... Thank you once again.
I really want to learn more , ive worked for a company for almost 5 years. They didn't teach anything , threw be on the machines with just basic load and unload and check some measurements. The little I know I taught myself or a couple haas guys actually taught me a little. I've watched my boss do somethings but he didn't slow down to teach. I happen to have fallen in love with CNC machining but im 48 and a mom. I looked into the college course at our local school its a 2 year course, all day classes. I can't do that and work and take care of my kids. Im looking for a night class that teaches the basics. Set-up and G-code. The local college has been saying they are trying to get one together but haven't yet. I took the haas certification class online but haven't done the final in person test from a haas instructor. I don't even know what I'm asking here but does anyone have any advice how to learn set-up and G-code without having to go to full time college?
I went to school for CNC machining, but they don't have all the different controls there, so basicly I learned the basics of machining there and Heidenhain programming, all the other controls like Fanuc, Okuma, SMT(very old), Siemens I learned just by reading the manuals and using the machines. You can download Haas manuals. -It's a shame they didn't teach you. It's the same in our company, the bosses don't allocate enough time to teach anyone and then they are in deep shit if I get sick. I guess the best option would be to convince your employer that it would be beneficial to teach you. Or find another job where they are willing to teach.
Max R the floor supervisor I worked for, at my first shop, carried around a weathered yellow post it note in his pocket, “G54 G00 G90 G17”. He’d enter it into a program, just after a tool change, if he needed to start a program in the middle. When I asked what it meant, he said he had no idea, just something you have to enter. We hope these videos are just what you described - the videos we wish we had available when we first started. Thanks for the comment. - Mark.
I have been thinking about projects for the Desktop mill that we are getting for our school system. the Homer Simpson hand code was excellent. I think we can do things like that and then add some CadCam stuff like BatMan logo or stuff like that. I have been using the Haas workbooks but I like your hand outs - are they downloadable? ( ps I just found them) I call it the "goes in to" then "do something" and then "get out of" when I describe it. Ed Doherty
These are indeed the 9 most used lines, though every "Dialect" of G-Code has its own quirks.. Basically, every experienced programmer, when programming at the machine will start with the same lines of code every time, and he will also use the same lines of code at the end of a program. You could have included G20 /G21 for Inch or Metric programming as well Though i don't really like HAAS Controls, i do like these videos.. Keep up the good work!
Hi Mark I watch lot of the videos from you, i have a question, i’m new in the CNC and i just started learn, i have a Fadal machine i can use the inf. That you bring in the videos on my fadal or only work in your machine? Thank you Wagner Damotta
Much of the basic G-code is the same, while Haas machines have quite a few unique codes and features, designed for our users based on their needs and suggestions.
Well nobody is going to write a whole CNC program to make anything significant, it still helps to know what the basic G-Codes and M-Codes do. When you are testing out a new part, its often easier to change a speed or feed or such at the machine than to go back and rerun the CAM. Also if you are validating a CAM tool / post processor for a new machine, you really need to understand what the G-Code does.
Our shop has two guys that wrote G-Code by hand well before cam software was something the smaller shop could have. We still use some entirely hand written code for parts we make regularly. You can be extremely complex by hand, but it's a dying art and easy peasy visual cam software is making modern programmers just lazy Facebook jockies that use a computer better than their other coworkers.
Brucec 95 i was surprised to find so many hand programmers when I moved to Michigan years back, but they were machining on castings, doable. For Billet work, machining from solid stock, you really need a CAM system, although, on the lathe side I’ve met a ton of fantastic lathe hand programmers that were really efficient. Today, with live-tooling lathes, we’ve blurred the line between mills and lathes and more machinists than ever are jumping straight into a CAM system. I guess it all depends on the parts you are running. - Mark
Check out ncviewer.com/ it's pretty cool, put together by Xander Luciano. We have full simulators for schools, and one of our dealers has a great app which you can find here apps.apple.com/us/app/the-phillips-machinist/id1046408069 . Haas has the HaasConnect App which allows you to monitor your machines, and the HaasDrop app that allows you to drop programs directly to the machines from your phone, which is cool. For more information on some of these tools you can check out haascnc.com/myhaas . For the Haas Simulators check out www.haascnc.com/machines/vertical-mills/control-simulator.html
We are doing some maintenance on our website at the moment. The link should be active again soon. Thanks. www.haascnc.com/video/Video-Bonus-Content.html
Thank you for being part of our success! Seriously, thank you for the amazing videos and ... machines )) there's a great document linked in the bonus content - the mill programming workbook. However it says VF/EC series. Would it wok on our pre-ngc TM-1? Or would you have a similar document for this machine?
Hi Akram. The Bonus Content 9-Line sheet will have codes for your lathe as well. You can download that Bonus Content here www.haascnc.com/video/Video-Bonus-Content.html
Not in all cases, if you need a .625 hole and your using a .5" endmill it would take longer to use the g13. Now if you are facing a part it will be quicker for a g13
I'm a new CNC student..my professors are top notch industry pros with decades of experience. But teaching isn't his best asset,,I've learned as much from this RUclips channel in the last weekend as I have in 4 weeks of school. You guys are great and helping this noob out more than you'll ever know..
I’ve been programming for 20 years and have to say that this is a very good explanation of the basics. Very well done. You’re a great teacher. I look forward to watching some five axis vids.
Hi John
@@marsel8718 Confidential, usually. In my company no-one knows what a worker next to him gets.
However, working 40h weeks and negotiating the best i could, my monthly wage was €830. It d
Hiii
Really need please reply me
@@amitkumarsingh7918 hi. What’s up?
@@marsel8718 Omg. Sorry I didn’t see any of these comments sooner. To be honest, it all depends on how far you want to take it. If you get into being in applications engineering for a machine tool company, you could make close to 200,000 a year. Depending on how much you work otherwise, it depends on the position you hold I am a machine programmer, but I am also the Director of manufacturing and engineering at my company. So the sky can be the limit. Just go for it!
Thanks at least for the fact that the company not only sells its products, but also shares useful info with others. Personally, I thank you for helping to understand the essence of the CNC without breaking the damn cutters.
I prefer a fellow human being who is educated and busy than a person who is stupid and unemployed and uneducated walking around the world and growing like a weed hahahaha!
................
I think: Haas colleagues also understood that education is the power ... to have a better society around us!
.....
The other way round, be cursed, who want to avoid it through internet filters!
I’m speechless this gentle just explain exactly what I needed to know in such a simple way without giving too much information at once
Dude the desktop machine with a pen tip is freaking genius
I was like oh yeah pen tip, for fine carving. NOPE, it’s a real pen :P
I enjoy coming here to re-learn basics. I work for Eaton Aerospace so I program 5 axis everyday. This guy makes things simple and it makes sense.
this video deserves so much more spotlight
Thanks Mark, I enjoy your tips. I'm a back yard manual machinist that has the CNC CERTIFICATE. But have never worked in the CNC trade. Mainly because my regular gig pays well and too close to retirement to start at the bottom of the food chain. I have manual machines but I can see a cnc mill in my retirement plan. The desktop Hass CNC machine realy peaked my interest. Trying to figure out how to break the news to my wife I want to buy another $8000. Toy for my shop without causing permanent damage to our 43 year marriage. You would think she would be used to my propensity for expensive toys by now. You are a great teacher.
😂prays my man😅
Decades ago I setup/ran and programmed a VF-2 . I had years of manual experience and a few years with a conversational cnc mill.
When I was asked to run the Hass I was the only one there that had cnc milling experience but no g code experience.
The Hass programming book was just a wealth of information that within a month I could program anything that the machine could possibly do. It also had a rotary 4th axis that I used on occasion.
On line support had very useful information I could use also.
Everything was easy to understand.
I even did some hard milling on it and saved a tremendous amount of time vs surface grinding.
We didn't have Cam at the time so all hand typed in but it wasn't difficult.
This has got to be one of the best structured and highly motivating introductory videos of CNC machine code I've seen. Thanks!!!!!!
I have programed ISO for about 5 years and then i met Haidenhein ,from that "Day" i never go back to ISO again...... But i enjoy the channel here.....you got some good tips here and there... :-)
I wish you would have taught all of my classes in high school. What an excellent teacher! My husband is an operator and they have been promising to teach him to program for 3 years. Over the years he has figured out some basics and can modify, etc. I just forwarded him this tutorial, he is going to love your stuff!
As a young setup machinist the explanation of dot to dot XYZ locations I never realized thats what it was for. You got my sub
Love it, no one have ever explain the basic of gcode like this way before. its great. I am going to watch all other videos of you Sir. Keep sharing knowledge for learners like me. Thanks again.
I will have to say thanks for the tips. I am working in a prototype shop with one other machinist who finished school a year before me (I only finished the program last year with the CNC certificate on top of my machining diploma) and having nobody with years of experience to help with the transition from student to machinist has been somewhat interesting. We run Haas VF3, TM2 (usually me running that one) and a TL2 (have been spending a lot of time on it over the past few months and have earned the title "lathe guy" from some of the engineers), so learning simple tips like what you show are always helpful. They are even more useful as I plan on returning to my school as a part time teacher (only requires 2 years minimum experience), so several things from these videos will be going into any CNC classes I end up getting involved with or just generally helping out students that are in those classes. Can't wait to learn more to improve upon my knowledge for better ways to have parts coming out of the shop.
This is exactly what I was looking for to help me know what path to take for learning CNC. It feels like there is so much to learn and this is a nice starting point. The ending also helped me know what to do next, thank you!
Thank you kindly, I am so thankful for completing the "Haas Certification Program", online.
Your videos are great for somebode who srarts with cnc. Greetings from Poland. Many thanks
I am currently learning the old Haas SL30 at my job. I am freshly graduated from 4-year machinist apprentice school and am soaking up as much CNC knowledge as possible. This video series is awesome. Definitely need this. Subscribed!
What kind of salary are you getting ? I know it's such a superficial question and very location based, but I'm curious. Thankyoh
@@hassaanawan9606 I work for a Department of the Navy owned shipyard. I’m a WG-10. I’m hourly not salary.
@hassaanawan9606 I've never been to a class for cnc 6 years experience running varying machines from crap lathes and mills to extremely nice lathes and mills. I make 32 a hour. Average about 80k with ot. Think I got like 84 last year this year we got less ot so a little less. Hoping to get a little higher wage soon and break that 100k mark. Alot of machinists / operators make less than me though. I even make more than half of the journeymen make in our shop. Seattle area just to give you a reference point. If you want real money get into hvac lol
I just got a job in the field, got put on a Haas making simple parts, I want to know how as much as I can. I'm in school as well so I feel like a deer in headlights somewhat. Great video, thanks.
At 3:13 pronounced CNC as CMC and became cheery red. It happens with everyone. Great video.
When I learned CNC programming back in 1991-1993, we started with this. We programmed the CNC and had a pencil in the tool holder. If we have programmed the program correctly, we had our picture.
Mark great video. I kinda did it backwards. I'm an engineer by trade. Didn't know a thing about CNC. Learned a bit on a chinese CNC i bought to learn the basics (using MACH 3 then) until I just went for it, quit my $140,000+ job and opened up my shop running a VF-5SS. Crazy scary. I relied heavily on my CAM system and it certainly got me through since I didn't know G code. But as the code is posted, I've been taking the time to understand more of what is being spit out, especially the G and M codes. Videos like these definitely help with that so thank you. Don't be mad because I learned G code backwards though :( lol
I'm sure a basic program can be written by hand pretty quickly, the conversational programming is pretty good as well. But more complex toolpaths, especially 3D surfacing would be a nightmare to do by hand. Because of my background, I know CAD/CAM extremely well, with my G code knowledge growing slowly. But I think they are mutually exclusive. It does make you a better programmer if you know both though. Keep up the good content.
Cisco Hernandez I programmed for only a couple of weeks by hand before jumping into a CAM system, and never looked back. If you had just 100 hours to learn to run a CNC, I’d spend maybe 5 hours on these basic G-codes, 10 hours on setups (making things straight, setting offsets, using an indicator/probe), 10 hours on tools (drills/end mills/taps..) and their speeds and feeds then the remaining 75 hours getting to know my CAM system. I just made this schedule up, but you get the idea. The way you described learning things through your CAM system is a solid approach. We only have so much time - Mark
@@markterryberry4477 Completely agree. When I was in the engineering world, we were design aerospace systems for Space X, Boeing, Lockeed, Northrop, etc. I got to test some of the equipment in the field, but man, my attention was always on the floor. On my own time I'd go an talk to the operators to pick their brain. Some had 30 yrs of experience! Are you kidding me, there was no way I'd ever learn what they knew on programming manually. At that time, the idea of running my own shop was so far fetched, this was in 2012. As channels like yours, NYC CNC, Titan and other started to come out it certainly has made it possible for guys that have no experience to jump in and learn. It's been a hell of a ride and the learning curve is steep as hell, I have had some very expensive mistakes but man am I happy. The business is growing and my experience with it. Fortunately, I have been able to stay profitable. Once again, thank you for all the content. I live in California so maybe one day we'll get to meet to discuss things more in detail. Keep em coming!
@@ciscohernandez4384 I know this is a very old comment but you learning that code is not only valuable for making money but the guys on the floor respect you so much more if you know what you're talking about and can work through something with them.
@@MrNinjaman63 Very true. During the time i've been programming I'm certainly polishing my skills understanding more of the code and getting deeper into post processors. And well it also helps I'm the owner of the shop lol. Either way, in my experience it's more of a people thing having the floor's respect vs. knowledge. When I don't know something I don't hesitate to ask and operators have absolutely no problem walking me through the ropes. They help me in some areas I help in others. Thanks for the comment
in 1980 where i was working the older machinist got to learn to run the new K & T cnc mills. to say we had a steep learning curve is a big understatement. these new machine couldnt interalate going around a corner. we had to input point to point by hand.
G-Code Vol 1 of 237, classic! Nice introduction. Thanks for the video.
This is probably one of the best tip vids that you all have done!
Hello Master !
I am your new fan because you explained it so easily that everyone understands it!
God bless you & your Haas colleagues!
Super handy to know if you're running a simple one-off part and don't have time to CAD/CAM it or if you need to debug a program. Also, the tool change commands are helpful on older machines when setting up or changing out tooling. G-code IS still relevant and useful to know!
Is relevant and always will be. G code is simplest way to program your cnc .
I fat finger half my code lol faster than drawing and transmitting the code.
Hass machines are famous for being not only user friendly but the conversational side is easily understood by New folks as well as others.
Most if not all CNC's still run on G-code so it's absolutely helpful to know it when problem solving and making small changes so you don't have to create an entirely new program on CAD.
@@matthewchapman2494What’s not user friendly on a Haas? I would argue they’re one of if not the most user friendly machine on the market.
Mr. Mark thanks for sharing valuable information with your user ....
And with upcoming Users......
I hit the like button and I also like you I find you are an excellent instructor I enjoy your videos very much I am learning a ton of stuff thank you from Canada 🇨🇦
Excellent video. Clear and straightforward. Thank you.
your videos comes better and better everyday, and I enjoy it even more! thanks!
So many rules.
So much easier when you incorporate all the defaults and tool length call into the tool change macro.
Dang! Thank you, I can only hit the like button only 1 time, epiphany, wow!
Thank you very much for your dear haas company for Turkish subtitles. Your videos are super congratulations.
Thank you Mark to share all of your knowledge with us. I never missed one. This had been helping me a lot all of these years. God bless and continue educating us.
4:25 I remember making my first homer. It was a good time.
I wish all teachers could prepare classes like this one.
Thank you for this video! Now I can read the program in our system. This will be my fundamental for the meantime..
Again, thank you Haas!
I found this video to be very informative, i'm just starting to learn G-code and i'm looking for any short cuts that i can get. I'm a visual learner so videos are great for me.
Thank you ,This had been helping me a lot all of these years. God bless and very nice
I'm just getting into this, and this is a HUGE help!
So I’m taking an assessment for Cnc bender after my 3rd day tooling parts. I’m nervous because I really want to do this but afraid of being turned down. I know nothing about the machine. But. I was pretty good in algebra so hopefully it’ll come back to me. I am going to study these codes so it will help me a little. Wish me luck guys
How did it go?
@@imaamericangirl1406 I can’t believe how much has changed since then lol. I was told I was going to take the assessment and they never came and got me off the floor so I left and now I have 3 certifications with the department of agriculture and rural development and currently get rid of your skeeters
Go on, go on, go on, go on, forever I loved your charisma
Hi Mark , your videos are ever exhaustive I see the bonus video !
You made that so easy to understand that even me a 35 year old janitor could understand it thank you!
It was mind blowing in school when we had 2 or 3 axis coordinates. But i was never prepared to drive 13 axis lathe :D
Can you please tell me the name of that machine?
@@nf794 index g300 flex
Very useful program and I have to say, straight to the point. Love your content and it really is that simple. I am a huge fan followers. Thanks for the knowledge and for showing all that you need to know about CNC. Please like and subscribe. You will NOT be disappointed.
Haas really does a great job on these videos.
Mark is fantastic, right?!
#VeryCool! #ThankYou! for keeping it positive.
This video shows what is possible if we all try to get the best grades in school.
Please in the next video give a shout out for all those who are coming up. By shooting out "YA HOOOOO!"
This video made me understand gcode. Thank you from Japan.
Love your humours explanation
I dont have hass mill, I have my own built Linux CNC but still I love to watch your videos 💚
Haas tip of the day is always helpfull. Gives me a lot of new things that I didn't know. Thank you so much Haas
I learned my first code on a turret punch press . Super easy code. So easy I would write code right on the machine to make personal stuff lol.
Great videos! We recently had a new VF2 installed and it's amazing just how closely it matches out now ancient VF2 from the late 90s in terms of control. Made it easy for me to transition over, taking in to consideration a few new buttons and a fancier display.
Would love a CAM system. We free hand all our programming here, but are looking to invest in that at some point. I dont know how any of that works but I would love to learn, sounds like the way forward and a huge time saver I bet
HI MATT, i am getting in my TM-0P october 3/22 i have cad nailed but no experience on the cam side of things. what did you end up doing?
Thanks so much for the heads up, I so much have a passion to learn the cnc programming.
I will also love to get the codes if possible.
Thank you Mark for sharing your knowledge. You are a great Master CNC. God bless you.
I love it and I love you! Not a programmer but understand!
Boil down the manuals and you get Haas soup of the day!
Thanks for breaking the CNC machining process into bite size pieces.
brilliant (and you guys are having far too much fun). bet yer people are going to run production on those minimills...
Excellent way of transferring knowledge. Thanks a lot.
❤
I am very appreciative of this content!
Excellent tutorial, extremely important to empower knowledge in this widening field ...thank you Mark for your contributions...😊
Great presenter and awesome series, a lot of work and care was put into it and it shows. Thank you
I’m actually struggling with program structure so this REALLY helps.
Everything Mark says really helps. People have no idea how valuable these videos are. People work their whole careers and can't handle half this stuff.
Jonathan Graham
I’m gonna get personal so please try to bear with me: I honestly didn’t know what I wanted to do with my life- Machine Tool Technology just sounded "cool" so I chose that as my concentration for my community college (I completed my gen ed courses before I started the MTT program). About this time last year, I started my first project in manual and something just clicked. Now that I’m done with the manual shop classes, I’m currently in my first semester of CNC- milling is taught in spring & turning is in the fall. CAM is in summer but I can’t take that till I’ve passed either CNC milling or turning. Anyways, to sum up what my above comment was about: I definitely know my Cartesian coordinates and am pretty confident in my blueprint reading skills. What I need to work on is what to put on each line of code. Also, I have add/adhd which probably contributes to the fact I’m mostly a hands-on/visual learner (so yeah these vids help) but I won’t let my so called "disability" stop me from becoming the best CNC machinist I can be. I wouldn’t have chosen this as my career choice if I didn’t think I could do it.
Alright I’ve said enough. And to any CNC machinists who might’ve been in the same boat as me at one time, I’m looking forward to joining you on the summit
@@stuartpeck26 Good on you for recognizing what you're interested in and striving to understand it on your own time as well. You may or may not end up on a Haas machine when the CNC classes come around but no doubt you'll learn lots to start you in the right direction. I came at machining from the opposite side haha. I was the cleanup guy for a job shop and learned all I could watching the other guys. They started letting me do small jobs that had been started already on the CNCs, then let me start setting them up, then start proofing... Until now, I setup and run parts regularly and I'm decently proficient at hand editing G-Code. I wish we had more manual jobs for me to learn on as well, I find myself behind a mill or a lathe about 1/4 as often as their CNC counterpart. But I'm happy to be learning and have a job that makes me exercise both the creative and logical sides of my brain.
@speedytech7 These are the machines in my community college’s CNC training building: 3 MAZAKs- 2 mills (one with 5axis but u have to be at a certain skill level to use that one) and a lathe; 1 Samsung lathe with Fanuc controller; and the rest are haas mills & lathes. I believe our VF3SSY is actually being leant to us. HAAS had a demo day this past summer back while I was in my intro to machine shop 2 class in which they were primarily using it
And thanks
While it is important to understand G-code for debugging or fine tuning most modern shops use CAD/CAM and conversational programming. Which with a decent post processor they will handle the structure for you. It's other stuff they can be less then awesome at. Here's a trick as you reading code on the screen use your finger to simulate the cutter and your desk as the mill bed.
Hi.... Dear sir, It's very useful video, Thank you very much.
Sir, i would like to know where are you from? I am from India and working as CNC mechine oparator.
I like your video very much... Thank you once again.
Thanks a lot
I will add similar videos on my pages to help improve Maintenace and operations
I really want to learn more , ive worked for a company for almost 5 years. They didn't teach anything , threw be on the machines with just basic load and unload and check some measurements. The little I know I taught myself or a couple haas guys actually taught me a little. I've watched my boss do somethings but he didn't slow down to teach. I happen to have fallen in love with CNC machining but im 48 and a mom. I looked into the college course at our local school its a 2 year course, all day classes. I can't do that and work and take care of my kids. Im looking for a night class that teaches the basics. Set-up and G-code. The local college has been saying they are trying to get one together but haven't yet. I took the haas certification class online but haven't done the final in person test from a haas instructor. I don't even know what I'm asking here but does anyone have any advice how to learn set-up and G-code without having to go to full time college?
I went to school for CNC machining, but they don't have all the different controls there, so basicly I learned the basics of machining there and Heidenhain programming, all the other controls like Fanuc, Okuma, SMT(very old), Siemens I learned just by reading the manuals and using the machines. You can download Haas manuals. -It's a shame they didn't teach you. It's the same in our company, the bosses don't allocate enough time to teach anyone and then they are in deep shit if I get sick. I guess the best option would be to convince your employer that it would be beneficial to teach you. Or find another job where they are willing to teach.
Thank you Mark sir to share all of your knowledge with us.
Very interesting and correct basic info, thx for sharing!
hello sir thanks for tip. it very helpful for me. may i ask how can i get this paper your use in this video.
Maintenance Tech here, wish I had this when I started out.
Max R the floor supervisor I worked for, at my first shop, carried around a weathered yellow post it note in his pocket, “G54 G00 G90 G17”. He’d enter it into a program, just after a tool change, if he needed to start a program in the middle. When I asked what it meant, he said he had no idea, just something you have to enter. We hope these videos are just what you described - the videos we wish we had available when we first started. Thanks for the comment. - Mark.
@@markterryberry4477 👍🏼
I have been thinking about projects for the Desktop mill that we are getting for our school system. the Homer Simpson hand code was excellent. I think we can do things like that and then add some CadCam stuff like BatMan logo or stuff like that.
I have been using the Haas workbooks but I like your hand outs - are they downloadable? ( ps I just found them)
I call it the "goes in to" then "do something" and then "get out of" when I describe it.
Ed Doherty
Gracias por compartir sus conocimientos con la comunidad, gracias..
Make a video on types of ways to take work off sets. Different types, better ways take off sets.😊
The Machinist's Code is more of a guideline than actual rules...
Borkocyte 2 this needs to get printed on a T-shirt. I see a pirate themed meme in our future.
@CNC LATHE FANUC I have one doubt can u please help me
@Grant Morgan why are these everywhere? Do people really fall for them?
Search CNC fail and see what happens...
Barbossa?
Thanks Terry, this really helps. Keep em comin!!!!
I am starting an apprenticeship today as a machist 1
These are indeed the 9 most used lines, though every "Dialect" of G-Code has its own quirks..
Basically, every experienced programmer, when programming at the machine will start with the same lines of code every time, and he will also use the same lines of code at the end of a program.
You could have included G20 /G21 for Inch or Metric programming as well
Though i don't really like HAAS Controls, i do like these videos.. Keep up the good work!
How would you improve them, Jan? Maybe they will take note?
@@imaamericangirl1406 How to improve a Haas Control?.. Redesign the keyboard, start using Softkeys, get rid of the beeps.. for starters..
You are a great teacher. Thank you...
Why is Haas tip of the day the best thing for an engineer?.......
This shit is like crack I have binged watched the whole series.
This is a great exercise
Thanks sir ,fr the basic attachment which shared with us ,its so useful, 🙏
Big fan of your lessons.🤩
FINALLY!
Not a list of 5 or 10!
Hi Mark
I watch lot of the videos from you, i have a question, i’m new in the CNC and i just started learn, i have a Fadal machine i can use the inf. That you bring in the videos on my fadal or only work in your machine?
Thank you
Wagner Damotta
Much of the basic G-code is the same, while Haas machines have quite a few unique codes and features, designed for our users based on their needs and suggestions.
What is the best way to memorize g and m modes? As well as their variables?
Great video! I'm trying to find the referenced PDF but don't see it in the comments, where is this found?
Good day. Do you have a tutorial for a helical entry for tool? Like making a pocket?
Tot ceea ce datorez este exclusiv familiei mele.
Restul fac pentru că așa simt.
Well nobody is going to write a whole CNC program to make anything significant, it still helps to know what the basic G-Codes and M-Codes do. When you are testing out a new part, its often easier to change a speed or feed or such at the machine than to go back and rerun the CAM. Also if you are validating a CAM tool / post processor for a new machine, you really need to understand what the G-Code does.
Are you kidding? I would guess about 25% of shops use hand written code only, and 90% of shops use at least one hand written program a month.
Our shop has two guys that wrote G-Code by hand well before cam software was something the smaller shop could have. We still use some entirely hand written code for parts we make regularly. You can be extremely complex by hand, but it's a dying art and easy peasy visual cam software is making modern programmers just lazy Facebook jockies that use a computer better than their other coworkers.
My buddy Jack does.. he uses an old form of Bobcad for the numbers and writes everything by hand. But he's been doing it for almost 30 years.
@@spikeypineapple552 job shopping simple parts for sure. But some just send that to the manual mill to save cnc hours.
Brucec 95 i was surprised to find so many hand programmers when I moved to Michigan years back, but they were machining on castings, doable. For Billet work, machining from solid stock, you really need a CAM system, although, on the lathe side I’ve met a ton of fantastic lathe hand programmers that were really efficient. Today, with live-tooling lathes, we’ve blurred the line between mills and lathes and more machinists than ever are jumping straight into a CAM system. I guess it all depends on the parts you are running. - Mark
Hope you guys can make an app so we can practice programming
Check out ncviewer.com/ it's pretty cool, put together by Xander Luciano. We have full simulators for schools, and one of our dealers has a great app which you can find here apps.apple.com/us/app/the-phillips-machinist/id1046408069 . Haas has the HaasConnect App which allows you to monitor your machines, and the HaasDrop app that allows you to drop programs directly to the machines from your phone, which is cool. For more information on some of these tools you can check out haascnc.com/myhaas . For the Haas Simulators check out www.haascnc.com/machines/vertical-mills/control-simulator.html
...thanks for the content. I can`t find doc for download. Was checking in ``show more`` under the vid but only links to other vids there..
We are doing some maintenance on our website at the moment. The link should be active again soon. Thanks. www.haascnc.com/video/Video-Bonus-Content.html
I ask you to make an educational video about the maintenance of the spindle during the rotation, there is a sound during the removal of the head
Thank you for being part of our success! Seriously, thank you for the amazing videos and ... machines )) there's a great document linked in the bonus content - the mill programming workbook. However it says VF/EC series. Would it wok on our pre-ngc TM-1? Or would you have a similar document for this machine?
That programming workbook is great for programming the TM Toolroom Mill as well. The TM can use the same code as a VF. Thanks for the comment!
you are savage in your explanation dude
Watching this video one word comes to mind.....DOH!
Sir. So interesting lecture. But you send some notes to for cnc lathe machine. Thanks
Hi Akram. The Bonus Content 9-Line sheet will have codes for your lathe as well. You can download that Bonus Content here www.haascnc.com/video/Video-Bonus-Content.html
I just found out G13 I xxxx. Instead of G02 & G03 makes life so much easier.
Not in all cases, if you need a .625 hole and your using a .5" endmill it would take longer to use the g13.
Now if you are facing a part it will be quicker for a g13