How to setup ANNKE DVR/NVR on the monitor
HTML-код
- Опубликовано: 9 сен 2024
- Video transcription:
Hi everyone, today I’m going to introduce you to the smart search, H.264+, and motion detection email alarm function of your newest DVR. These are only some of the many features you’ll be enjoying with our security products. This video also applies to the DVR series including DN41R, DN81R and DN61R.
First I’m going to demonstrate how to use the smart search function.
Now you’re going to want to drag your mouse to the top and click on the menu icon.
Then click the playback icon on the far left.
In the drop down menu select smart, then on the following page select the play icon for Camera 01.
After that move your cursor to the bottom of the page where you’ll find a wrench icon. This is for your settings. Click it.
First, check the box for Skip Non-Related Video and then press okay. This will take you directly to the moment motion was detected.
Now I’m going to show you how to set up your H.264+
From here you’re going to click the menu icon at the top. Select record, and then parameters.
You’re going to want to check the box to enable H.264+ for Camera 01. H.264+ enables you to record more efficiently and preserve disc space. Then click apply, and then yes. This reboots the system.
Click the Menu icon again. Click Maintenance, and then System info.
Select Record at the top. Notice the bitrate difference for cameras A1 and A2 after enabling H.264+.
Now, we are going to explore how to set your email alert.
From here you’re going to once again select Menu, then Configuration, and then Network.
Once you’re in configuration select email.
In the top left you’ll see a box to Enable Server. Check it.
In the top right box you’re going to type the SMTP Server IP address or host name.
Then write your username in the username box, and then type in SMTP Port. No.
After this, type in your password.
On the right there is going to be a box that says Enable SSL. This sets up an encrypted connection. Check it.
Next you’re going to want to type in a sender name and an email for sender’s address.
Select a receiver, and then just like before, type in a receiver’s name and email address. Of course, these can be the same as those above.
Make sure to check the box to enable picture attachments. Next you’re going to want to select a time interval for sending pictures.
You can also test to see if everything is in order by sending a test email here.
Next just click Apply, and then OK.
After this you’re going to select Camera, and then in the drop down menu click Camera.
Select Motion, and then find the gear icon. This is for Settings. Click it.
Select Linkage Action, and then just check the box for Send Email to enable this function.
Select Apply, then OK, and then Back and you’re good to go.
Now let’s check out your email and look at the snapshots you received after motion was detected.
And there you have it, hopefully now you understand how to set up your email alarms, H.264+, and smart search function. As for our other exciting features, such as our smart remote access and day and night vision, feel free to explore our website and learn more.
Well that’s all for these three features for now. If you have any questions feel free to watch this video again or contact our support team for help.
Official website
Global: www.annke.com/
UK: uk.annke.com/
DE: de.annke.com/
FR: fr.annke.com/
IT: it.annke.com/
ES: es.annke.com/
AMZ Store
AMZ US: amzn.to/3cDHuge
AMZ UK: amzn.to/3R9Id7P
AMZ DE: amzn.to/3TyEtOW
AMZ FR: amzn.to/3TwK8VT
AMZ IT: amzn.to/3B4ClY3
AMZ ES: amzn.to/3q5Q22M
Installed it myself without any issues. The wifi signal is great even ruclips.net/user/postUgkxE_D_sddGAdiVUKp7PkkmyxO7bRtgqmk5 when the router is located far away. I really enjoy the night vision feature that allows me to see clearly any activity near our house (mostly cars and wild animals). The motion detection is helpful to me as well to monitor what happens on our front.
When you enter the user name is that your email user name or user name for the camera system
how do I transfer video files from the Hard drive or DVR to my computer? IS there a way to use the ethernet cord and then download it via internet to a website for storage?
Or perhaps to the PC if I don't have a uSB drive?
Not user friendly at all this system
I just purchased my unit from Amazon on 1 Oct 2022 and it is a model D981BB. I do not see any of this stuff. Have i been sold an old model?
hi my h.264+ is greyed out and wont let me select, please help
Useless video, didnt even show how to set up and connect the camera, all my stuff is connected with just a black screen!
Hice todo como el vídeo, pero indica verificar parámetros y network status... Mi Systema está conectado al internet y también veo los vídeos a través del celular.. lo único q faltaría son lo Gmail y no sé qué más hacer para que envíe los Gmail...
I have a DN61R DVR system and the light is blinking and the screen is black. How do I fix this?
Necesito reemplazar la cajita de mis cámaras o monitor a donde o como le hago
My annke is locked to cam3 and will not change. I think it is stuffed. Only 3 yrs old?
wheres all the codes and things that you speak of?
I just bought this annke but cant seem to get it to operate. Does anyone have a phone number in the
US for help..
Thank you Ron
HOW CAN I MAKE MY SYSTEM TO HAVE IQUAL SCREEN SIZE, MINE IS SET TO ONE LARGE IMAGE SCREEN PICTURE AND THE REST ARE SMALLER SCREEN?
How to setup and monitor ANNKE DVR on computer? its the title of the video yet it doesnt even cover it
Could you please tell us model number of your system? It is made up of numbers and letter such as DN81NB. You can find it at the bottom of recorder. It is not SN like 20150611. Here is an example for your reference.
www.annke.com/kb/index.php?action=artikel&cat=11&id=100&artlang=en
@@Annkesecurity how do I transfer video files from the Hard drive or DVR to my computer? IS there a way to use the ethernet cord and then download it via internet to a website for storage?
Or perhaps to the PC if I don't have a uSB drive?
i can not connect to my computer i have it on my phone an my monitor but i would like to have it on my computer as well any help would be grate thanks
help.annke.com/hc/en-us plz visit here for help.
download software available at annke.com and suppsodely must use IE. I have to yet to figure it out.
@@lowhertzhighspl i contacted support . follow this like they gave me . help.annke.com/hc/en-us/articles/360000252441
Get Guard vision. Since you have it on your phone the set up is pretty simple. Find the anneke resource page and follow Step by step.. works well once you figure it our.
how do I transfer video files from the Hard drive or DVR to my computer? IS there a way to use the ethernet cord and then download it via internet to a website for storage?
Or perhaps to the PC if I don't have a uSB drive?
Recording with date and time working but no video
I cant find the annke vision app or any app for annke i need help
I have the DN41R model. Where is the on/off switch?
Why does it off line ? Please help , what do I need to do ?
I need help setting live view on hdmi and vga please help
No luck having the email alert - Always says "Failed to send test email, please check the parameters or network status" - Followed directions exactly like video using gmail as well???
You were able to fix the issue?
How to record time lapse per 5 minutes or 15 minutes to an SD card?
The user NAME NOT just your user name. It is the complete email address and the password is password for that respective email account.
Hi, thanks for pointing this out. We will double-check this video and revise it if needed.
I have the DN81RA (8 channel). How do I play back more than 2 channels synchronously? I have read that this is possible if I change the camera resolutions from 960H to D1, however, I am not sure that I know how to do this correctly. I have already tried Menu>Recording>Parameters and unselecting "enable 960" and changing each camera resolution (both continuous and event) to WD1 but it still doesn't allow playback of more than 2 channels at the same time. Any step by step help would be greatly appreciated.
Hi friend, this DVR can only playback 2 channels at the same time. Would you like us to recommend you another model that can support more channel for playback?
When I try to view a camera on my pc I get the message "Reconnecting error code. Open SDK String Error. (Verification code error). What do I do with this?
Hi how Can i get more times in recording with HDD 1T
Ive just installed this system with a hard drive ive got this plugged in with the 2 leads supplied but its not showing i have one installed?
Hi, please refer to this instruction to check if the hard drive is installed correctly: help.annke.com/hc/en-us/articles/360000252782
Hi my camera is connected to the internet but I cannot get test email .and tells me . Failed to send test email please check the parameters or network status.can you give me the SMPT email address
and please help me
Thanks
how can i record video
Do I need a dedicated monitor for this? This is something completely ignored in sales literature and the manuals. I don't have a monitor - I use a laptop. Is there a way to connect to my laptop to set system up? What about installing an app on my phone and directly accessing the setup menus. Also is there a way to copy the security videos from the dvr to compiter? Eg, I need to use video for a court case, etc. Thx.
Fyi, My model is DN81R
sound is messed up
Is it possible to switch off the automatic infrared cut feature?
We need one of our cameras to record using daylight settings 24/7.
Yes it's easy. Use PTZ settings by clicking IRIS+
How to set it where is cycles through all cameras, one at a time, all day
Hi, you can do this by clicking on rotate icon from the menu bar shown at the top of the monitor display.For further assistance, please contact Annke tech support here: help.annke.com/hc/en-us/requests/new
I have just completed my DN81R installation, I have the 6 camera system and I'm using my 73 " Mitsubishi TV however when I try to view the security system and switch to HDMI 2 there is no image it is a black screen. I have seen other posts with the same issue but there is no where with a solution can anyone help? I have tried the support phone line but they are not working in the afternoons? Make any sense to you?? Thanks, frustrated in Texas
Follow this :www.annke.com/kb/index.php?action=artikel&cat=28&id=421&artlang=en
Or you can contact us phone number:
US Number:404 620 4370 (EST 07:00-11:00 and 20:00-24:00)
UK Number:117 325 2667 (London Time 07:00-16:00)
AU Number:03 8658 8870 (Sydney Time 11:00-24:00)
Hi. I'm connected to the internet, but email notification is a failed. PLEASE HELP ,I have the DN81R
Motion detection: www.annke.com/kb/index.php?action=artikel&cat=21&id=219&artlang=en
Email alert: www.annke.com/kb/index.php?action=artikel&cat=21&id=236&artlang=en
Salve...e possibile capire in italiano questo video..grazie mille..io ho ougale questo tipo di dvr..
Question were can I fine our what do I type in the box that ask me to put SMTP and SMTP POR? NEED HELP PLEASE
This information you can get from your email provider. It’s in relation to your sending and receiving emails.
Good morning Alan my question was what do I put in the SMTP SER... is it my email? Also on the SMTP PORT what do I put there?
an example would be, if your email address is @gmail.com then the SMTP would most likely be. smtp@gmail.com port number is usually 25 but if this doesn’t work you need to check the website of your email provider. If you need any more information send me the part of your email after the @. Regards
I am unable to get anything on the screen? I have disconnected everything and connected again... there is no signal on the screen. I cannot even get DVR interface. Need help
1.Do you mean you can not see camera's image on monitor or TV? pls send a picture of your screen to us check, than you !
if YES, can you see system's setting panel? which is very important.
2.Do you notice if system gets power? if it gets power, the LED in front of DVR will be lit up.
3.Did you hear a beep when system powers on. It is very important.
4.Are you using HDMI port on DVR to connect DVR to a monitor or TV? if yes, could you please try VGA port on DVR?
5. Make sure your TV is in right mode, HDMI mode for HDMI cable, VGA mode for VGA cable, not any other mode. You can the monitor remote control to switch it.
6. Can you kindly change another power suppply to have a try? you can use the camera's instead.
my email doesn't work, I have watched many help videos to solve this and still not working.
Hi friend, could you submit a request to ANNKE tech support, then our agent will help you further to resolve it:
got everything setup but when I click test I get failed to send check parameters or network status, I know its online cuz Im using the app to view from my phone just not sure what it means about parameters thanks in advance
Pls kindly check does all of your setting is correct or not ?
Motion detection: www.annke.com/kb/index.php?action=artikel&cat=21&id=219&artlang=en
Email alert: www.annke.com/kb/index.php?action=artikel&cat=21&id=236&artlang=en
Got the test to work thanks
Why is my android saying failed to start playing on phone. Am I doing something wrong
Hi, please make sure your Annke system is connected to Internet at first by following this instruction: help.annke.com/hc/en-us/articles/360000648061 Any further questions, kindly contact Annke tech support at
I connected the system (Model: DN81R) for the first time, but its asking me for a password. The manual doesn't assist with this. I'm stuck and can't set up the system. Is there a way to reset the system again, so that i cant set my password? Or, other suggestions?
If you forget password and can not access system, please provide some information to us so that we can provide a super code to access system. Here is information we need.
www.annke.com/kb/index.php?action=artikel&cat=21&id=202&artlang=en
1.Please remember input super password on that day on the interface where you can see the long SN, not on the log in interface where you can see user name admin.
2.We will give you code for several days like Security Code:q9SqeQqRRq Valid for:06/03/2017(day--month--year), which means if your monitor shows date 03-06-2017(June 3rd), input that code q9SqeQqRRq so that you can reset your system.
3.Here is video to show how it works. ruclips.net/video/kmL5pDFoSs8/видео.html
Password: admin123
Hi there annke why wont my H264+ let my enter the smtp server address
Hi Robert, please follow this guide to configure smtp server:
@@Annkesecurity brilliant works fine now thanks
does the DVR require HDD to view cameras on the monitor? because i cannot view any cameras on screen
Without a hard drive , the DVR would only be capable of live viewing and live remote internet viewing; you would not be able to record footage or play back footage.
Regarding hard drive, an internal SATA II and III 3.5” one would be compatible with our system.
You can choose WD or Toshiba.
Here is link below which you can check it:
www.annke.com/kb/index.php?action=artikel&cat=11&id=24&artlang=en&highlight=hard+drive
An external hard drive that hooks up through USB would not record. The USB interface does not allow live recording
i cannot even get live viewing
Please contact support@annke.com
Can anyone tell me if it is possible to view live video feed using cat5 cable connected directly to the DVR and a RJ45 to micro adaptor on the other end of the cat5 cable allowing a connection to a monitoring device? as I am considering on getting a Annke DVR and I wanted to use a old android phone instead of a computer monitor beside my bed to check the feed and not illuminating the whole bedroom at the same time.(because a computer monitor illuminating the room would Certainly infuriate the wife) especially around certain dates of each month!.
How do you install the hard drive?
Hi friend, please follow this instruction to install the hard drive in a Annke system: help.annke.com/hc/en-us/articles/360000249441
how to do a factory reset
Hi Marie, please log into the Annke DVR/NVR on a TV/monitor, go to Menu--Maintenance--Default, then click "Restore Defaults".
4 blank screens where live feed should show. This system is really hard to set up for a layman.
Hi Dave, this issue might caused by either hardware (power adapter, 4-way splitter cable) or the software (live view setting). Please contact our tech support here for more assistant: help.annke.com/hc/en-us/requests/new
ANNKE only a month to reply. Brill. Got a engineer in to fix in the end. Had to plug into his own computer to fix. Poor CX.
I can't even use the software on my computer,I click on everything and nothing happens,wtf
Hi Charles, we recommend users to connect the ANNKE DVR/NVR to a TV/monitor for the first time for complete access to system settings. If you need to visit the system via computer software later, please refer to this instruction: help.annke.com/hc/en-us/articles/360000252441
Unable to connect to the network. HELP
Please contact support@annke.com
What is the default password for the DVR? I dont think Ive established one yet. My User Name is admin.
This is usually left lack for first login then you are asked to set a password
How to keep mobile from going out every 5 minutes
Hi Jack, please connect the mobile phone to a faster WiFi to have a try.
how do i use the app?
For phone view, please refer to method in link below.
www.annke.com/kb/index.php?action=artikel&cat=28&id=376&artlang=en
Guys, I spend ages to see the camera remotely, trust me it won't work. No remote view on mobile app or through web browser.. its fake promise. I contacted the customer service mroe than 100 times and they responded silly answers and not yet solved. Better buy any other product if you want to view the camera remotely... waste of time and money. RUBBISH...
Saga Suresh have you downloaded and set the app Annke vision ?
Saga Suresh have you downloaded and set the app Annke vision ?
agreed
how do I transfer video files from the Hard drive or DVR to my computer? IS there a way to use the ethernet cord and then download it via internet to a website for storage?
Or perhaps to the PC if I don't have a uSB drive?