🛑!CORRECTION!🛑 Slight mistake in the video for measurements: 50 FT = 15.2 M (not 1.52 M) WOE Paracord Store ▶ paracordweavers.com/?sca_ref=6422991.Yrw6WNlrgE GET MY FREE EBOOK ▶ www.weaversofeternity.com/freebook
Do you know that you can flip each loop into a (kind of) cow hitch, bring the new line through, and flip back the new knot, just like you can flip reef knots (square knots in the US) over and back. Same result for much less effort. But I do like your design.
Started this today. Got the first row of hitches done. What really slows you down is running the remaining 50 foot tail through each loop. I’m dying here! 😵
Definitely. Ive been trying EVERYTHING for cord management What i found is using my toe to hold the cord straight while pulling it through minimizes twisting. But i cant find anything better to do yet
Wrap the cord around yor fingers and tie it off on the middle like a bow. You can pull more cord ar you need it from the bow and still have like 2 ft to work with at a time. You just have to leave the hitches loose enough to pass the whole thing through and then tighten it
Thank you so much for sharing this. I did this today. My first experiment with paracord. The outcome looks fantastic (not as beautiful as yours) and hope it keeps my bottle dent and scratch free. May be, because this is my first time dealing with paracord, it took me a lot of time. Almost 5 hours. It was fun anyways. Thanks.
I'm looking to do something like this for the handle of a boat motor, with which you control the speed. I have the feeling this will be a bit to loose to work, but something like this would be great!
Another question... Does the bottle stand up right with all the cord on the bottom? It looks a little thick. Do you have other ways to finish the bottom?
You could do the exact same wrap with gutted cord. I don't think the measurements would change all that drastically. Perhaps it would use a little more?
Awesome video! I have no idea how weaving works - but is it possible to weave it so that the vertical spacing between knots gradually gets closer as you move down the bottle? So it starts out with large gaps at the mouth opening, then dwindles down to the pattern shown in the video at the base.
I know it been 4 months but you could try different sizing for the loops. He kept it the same. Maybe go every second loop. And then you can add more than one hitch knot on the previous single loop. Did that make any sense? Difficult to word something like this. Cool cover though isn't it. I thought about doing a bag kind of like this but tighter knots. Like crochet tight.
If you are wanting to make this wrap and you do a feel loops, don’t get discouraged by the time it takes for each hitch. It gets better as you go since the rope is starting to get shorter and shorter. Keep going kings. 👑
@@frederiklist4265 If you have the room stretch the rope all the way out and do it like that. What I do is keep making coils on each side of me and untangle as I go.
There is a little mistake in video. 50ft is not 1.52 meters. It is 15.2 meters. I started to wrap my bottle and after few rounds was wondering that cord is about to end and I'm not even half away. New try with right length of cord. 😅
Yeah...i dont know man. I watched Counter Strike 2 videos ago, took a quick look at how to make cheese with a guy who said g'day curd nerds and ended up with you tying knots with paracord around a bottle. Thats quite a rabbit hole... Nice video btw. See ya next time.
This is a really cool way to wrap a bottle! I have experemented with this kind of wrap before because it can also be used to make paracord nets and net bags which is fun to do. Keep up the great content!
Hi! Watching from the Philippines! I wanna try this on my 1.8L thermal bottle. I couldn’t find a boot cover for this size. How much para cord do you think I will use for 1.8L ?Many thanks for this very cool video.
Hi! Thanks for the great tutorial, I’m about halfway through. Question, let’s say we’re out in the forest and need some rope for whatever reason, how quickly or easily is it to un-do all the ties on this bottle?
Nice Project, very comprehensively presented. Since you might open and close the net frequently on the top: Wouldn't it be better to start with a doubled half hitch? Even with the end molten down I would be afraid that that single overhand loosens with time.
This might seem like a weird request... But is there a tutorial in your videos that shows how to make a horizontal belt holster? I wanna make one for my nunchuks 😅
Эмм... Всё крнечно круто. Только... У меня на поллитровую бутылку ушло почти 10 метров паракорда. Наверно точку не там поставил... Не 1.52 а 15.2🤨А, ну правильно! 50 футов - это и есть примерно 15 метров🤦♂
Wonderful use and it looks beautiful. I am going to try it on some of my special glasses cut and polished from painted beer bottles, some of which need to be protected. hat color combination is also a great choice. One could say that you executed to creation without a hitch (LOL), thanks.
I have a 40oz water bottle that I wanted to put on my belt, so I cut part of a pant leg of an old pair of jeans and sewed one end shut and put my water bottle in, I also made a loop by the top for a carabiner.
The top node on the green cord looks like the weak point. Also, why use an additional cord at the top? Challenge: propose a wrap with a single cord and no such weak point.
I would make an attachment for the lid to the neck of the bottle as well. I made mine by looping one end to the water can and then making making half hitches with alternate sides after it was 6 inches long, I tied it to the loop part of the lid. This took about 40 inches of paracord.
One of the biggest problems I have with ypur videos is your thumbs always cover the knot you're doing and you go over how to do the knot too quickly not allowing for anyone to actually see what is happening. I always have to pause and go watch another video on how to do the knot you just did.
Is there a particular knot in this video that I covered up and didn't show properly? The two knots used in this project mainly are the half hitch and cow hitch. Both of which I showed clearly. If the diamond knot wasn't clear, I have a separate dedicated tutorial for rhat one. If there's something that really isn't clear though please let me know and I can perhaps clarify that.
Why would anyone want or need a paracord? I’ve racked my brain for the longest time and I just can’t imagine how anyone could mistake them for something useful.
I don't understand how you keep it from knotting up while running it through. Must be nice to have the free time to sit there and unknot all these stupid strands
It's actually not that hard. What you have to do is untwist the cord as you're pulling it through the knots. So if you just pay attention to the direction of the twists of the cord you can twist in the opposite direction to get it through the hitch knots.
Que hermosura de trabajo tegido quería preguntarte en el país donde vivo no venden esa aguja cual otra puedo utilizar mil gracias por tu en señanza es muy entendíble y muy bien explicado todo dios te bendiga siempre y te de mucha vida y salud para seguir adelante con todos tus proyectos y sueños
Hey BIG BROTHER, Please make your MOD SANCTIFIED KNIGHT and RED BEET paracord Bracelet full tutorial video available on RUclips 😭 , as I am I teenager from India & unable to support you on Patreon (lack of money). Those two I liked the most & eager to learn than 😣😣😣😣😭😭. PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE 🙏🙏🙏🙏
![[Limbus Company - Teaser] Season5 - Oblivion](http://i.ytimg.com/vi/8anKuEeZLeI/mqdefault.jpg)
🛑!CORRECTION!🛑
Slight mistake in the video for measurements: 50 FT = 15.2 M (not 1.52 M)
WOE Paracord Store ▶ paracordweavers.com/?sca_ref=6422991.Yrw6WNlrgE
GET MY FREE EBOOK ▶ www.weaversofeternity.com/freebook
How much coed did you have left over
thats why im short
Do you know that you can flip each loop into a (kind of) cow hitch, bring the new line through, and flip back the new knot, just like you can flip reef knots (square knots in the US) over and back. Same result for much less effort. But I do like your design.
@@RAMA-gu8cs me to😂😭😭
@@willekevanderham5326 can you give an example this will take hours
Started this today. Got the first row of hitches done. What really slows you down is running the remaining 50 foot tail through each loop. I’m dying here! 😵
How it go
Definitely. Ive been trying EVERYTHING for cord management
What i found is using my toe to hold the cord straight while pulling it through minimizes twisting. But i cant find anything better to do yet
Wrap the cord around yor fingers and tie it off on the middle like a bow. You can pull more cord ar you need it from the bow and still have like 2 ft to work with at a time. You just have to leave the hitches loose enough to pass the whole thing through and then tighten it
I was thinking the exact same thing. It's gotta take some time.
Starting my second bottle wrap today. The final product is so cool, I decided to make another. I always get compliments on it
Thank you so much for sharing this. I did this today. My first experiment with paracord. The outcome looks fantastic (not as beautiful as yours) and hope it keeps my bottle dent and scratch free.
May be, because this is my first time dealing with paracord, it took me a lot of time. Almost 5 hours. It was fun anyways. Thanks.
I'm looking to do something like this for the handle of a boat motor, with which you control the speed. I have the feeling this will be a bit to loose to work, but something like this would be great!
This is really cool. I made it for a taller Hydroflask and used a ranger bead instead of the cord stopper. Still looks awesome tho.
Awesome! Exactly what I’ve been waiting for! Thank you so much Tim! Gonna look wild on my titanium bottle :D Greetings from Germany!
Hey Tim, just realized that you did a point mistake in the video. 50ft is 15.2 meters and not 1.52m 😅👍🏽
Amazing and beautiful! Will have to do this one for sure!
Ok I'm gonna do this right now ! Thank you for your awsome videos
"Wrap your bottle.. Yeaaaaahhh... Wrap your bottle, yeaaahhhh, wrap your bottle... wrap your bottle now.. backstreet back.. alright!!!"
always wanted to do but didn't know until you my friend
Hello Friend. Very nice video thank you. 👍👏👏👏💖
Very good congratalations for you Job 👍👍😁 wonderful
Awesome! I will make one for my bottle. Thanks
definitely will be making this
So cool.. I'm gonna try it after watch it
Where did you get your cool little tools for weaving this bottle.?
Owsome thanks for the tUTorial💯💯💯
Any time!
50ft isnt 1.52m. it is 15.2m. be aware for those who are willing to make this as it is a HUGHE difference 😉
Another question... Does the bottle stand up right with all the cord on the bottom? It looks a little thick. Do you have other ways to finish the bottom?
Amazing 😍😍😍😍😍
Really cool
This is useful instead of having the bottle in a sock to keep sleeping bag warm without burning yourself on the bottle
I bet he has so much paracord just lying around his house
also its somewhat isolate it from the heat from your hand if the drink is cold
How do you measure the paracord to use in a water bottle? I want to make one for my 1.8L bottle.
Where did you get that lighter? Thanks!
Very cool 😍😍😍😍
Yes!!! I have been wanting to make one of these. Thanks.
good old PBW
very nice bro
I will do this but I think at the bottom I will do a kydex pc and connect the paracord to it.
That’s cool!!
Bro same colour, and same size bottle I have..😍🇮🇳👍
How much would I need for a 40 oz Hidro flask
Ever considered using a tight ranger bead instead of a cord lock? That's what I've been doing lately, remove the need for plastic!
0:37 , i think 50 ft is equal to 15.24 meter 👍🏻👍🏻
I've arrived on the paracord side of youtube.
Welcome!
Looks like it is kind of bulky....imho, Any guidance on doing this weave with gutted cord?
You could do the exact same wrap with gutted cord. I don't think the measurements would change all that drastically. Perhaps it would use a little more?
Does anyone know if this is 7 cord or 9 cord...??
can i do the same with a 10 meter paracord ?? (32 feet)
Lindo!!!
São 15.20m
I dont understand how to do the diamond knot
For what reason do you need this?
To protect your bottle? Better grip? You can flip it y to your bag? It looks cool? You have an original cover? May be other reasons too
Awesome video! I have no idea how weaving works - but is it possible to weave it so that the vertical spacing between knots gradually gets closer as you move down the bottle? So it starts out with large gaps at the mouth opening, then dwindles down to the pattern shown in the video at the base.
I know it been 4 months but you could try different sizing for the loops. He kept it the same. Maybe go every second loop. And then you can add more than one hitch knot on the previous single loop. Did that make any sense? Difficult to word something like this. Cool cover though isn't it. I thought about doing a bag kind of like this but tighter knots. Like crochet tight.
👌👌👌👍👍👍
💭
There were like 10 ads I had to refresh on before I could watch this video :/
Thanks for the amazing vid! Can I do that with a bottle that is flat on its top and doesn't have a neck? Thanks
"You have to depress-"
Me: *whispers* mother nature *never loved you*
This is like manly macrame. Love it!!
That's what my wife says I'm doing.....I tell her it's not macrame it's mancrame! 😁
If you are wanting to make this wrap and you do a feel loops, don’t get discouraged by the time it takes for each hitch. It gets better as you go since the rope is starting to get shorter and shorter. Keep going kings. 👑
@@frederiklist4265 If you have the room stretch the rope all the way out and do it like that. What I do is keep making coils on each side of me and untangle as I go.
There is a little mistake in video. 50ft is not 1.52 meters. It is 15.2 meters. I started to wrap my bottle and after few rounds was wondering that cord is about to end and I'm not even half away. New try with right length of cord. 😅
Yes, I made a slight mistake in the editing, I put the correction in the pinned comment.
Just started wrapping my speaker so I can hook it took my bag! This is gonna take a while
Such a wrap add a nice feature to your bottle: make it wet to cool your water about 15°Celsius under air temperature!
Yeah...i dont know man. I watched Counter Strike 2 videos ago, took a quick look at how to make cheese with a guy who said g'day curd nerds and ended up with you tying knots with paracord around a bottle.
Thats quite a rabbit hole...
Nice video btw. See ya next time.
that guy from chesse is verry good " Gavin Webber " greeeat guy, i also somehow get to his channel from youtube recomendation
That's a great way to have your most useful thing on an adventure. Will it be hard to unwrap the paracord when we need it?
This is a really cool way to wrap a bottle! I have experemented with this kind of wrap before because it can also be used to make paracord nets and net bags which is fun to do. Keep up the great content!
If this is used as a net, let's say to make a bridge, for kids to play with, do the cells remain even or do they widen under weight?
@@d.molina5644 they widen
@@troscar thanks
Perfekt perfekt perfekt thank you my friend very nice knittink 👏👏👏👏👏👏🙏🙏🙏🙏👍👍👍👍
Hi! Watching from the Philippines! I wanna try this on my 1.8L thermal bottle. I couldn’t find a boot cover for this size. How much para cord do you think I will use for 1.8L ?Many thanks for this very cool video.
Can you do a tutorial on how to attach a shoulder along to this bottle wrap?? Is it possible?
Hi! Thanks for the great tutorial, I’m about halfway through. Question, let’s say we’re out in the forest and need some rope for whatever reason, how quickly or easily is it to un-do all the ties on this bottle?
Nice Project, very comprehensively presented.
Since you might open and close the net frequently on the top:
Wouldn't it be better to start with a doubled half hitch? Even with the end molten down I would be afraid that that single overhand loosens with time.
Man, that was an awesome piece of work and one of these days I will definitely have to try this 👍🏻😍😂
Think I might use this for my bong i mean flower vase 😂
This might seem like a weird request... But is there a tutorial in your videos that shows how to make a horizontal belt holster? I wanna make one for my nunchuks 😅
Эмм... Всё крнечно круто. Только... У меня на поллитровую бутылку ушло почти 10 метров паракорда. Наверно точку не там поставил... Не 1.52 а 15.2🤨А, ну правильно! 50 футов - это и есть примерно 15 метров🤦♂
I could use this, but MY old stainless bottle is vastly larger: this is going to take more than 50 feet of cord.
Very COOL tutorial bro. Thank you so much 👍. Love your background music 😍.
Can I have one for a 64oz bottle, as I don't know how much cords I'll need.
OMG NOWow i have 15m of paracord that has a lot of twists.... What the hell
I have a jbl boombox and I think this would work perfectly...
Wonderful use and it looks beautiful. I am going to try it on some of my special glasses cut and polished from painted beer bottles, some of which need to be protected. hat color combination is also a great choice. One could say that you executed to creation without a hitch (LOL), thanks.
I have a 40oz water bottle that I wanted to put on my belt, so I cut part of a pant leg of an old pair of jeans and sewed one end shut and put my water bottle in, I also made a loop by the top for a carabiner.
The top node on the green cord looks like the weak point. Also, why use an additional cord at the top? Challenge: propose a wrap with a single cord and no such weak point.
This design is not practical in the slightest.
Can you make a paracord kusari fundo, I thought about making one my self but I am a completo beginner paracord weaver.
I made this with An mat black Botle and neon Orange string its so cool!
what drink bottle was that?
Could I attach molle clips to this and this and still be structurally sound?
Same weave as the "hippy" flower pot hangers from the 70s.
I would make an attachment for the lid to the neck of the bottle as well. I made mine by looping one end to the water can and then making making half hitches with alternate sides after it was 6 inches long, I tied it to the loop part of the lid. This took about 40 inches of paracord.
Good idea, lids get dropped all too often. A belt loop wouldn't hurt either.
One of the biggest problems I have with ypur videos is your thumbs always cover the knot you're doing and you go over how to do the knot too quickly not allowing for anyone to actually see what is happening. I always have to pause and go watch another video on how to do the knot you just did.
Is there a particular knot in this video that I covered up and didn't show properly? The two knots used in this project mainly are the half hitch and cow hitch. Both of which I showed clearly. If the diamond knot wasn't clear, I have a separate dedicated tutorial for rhat one. If there's something that really isn't clear though please let me know and I can perhaps clarify that.
Cool. Can u make a single color bracelet. I have only one colour of parachutes
Sorry I ment paracord
❤&❤
What a show. You're the best. I love doing this, it makes more phones opcoes.
Why would anyone want or need a paracord? I’ve racked my brain for the longest time and I just can’t imagine how anyone could mistake them for something useful.
So cool
I don't understand how you keep it from knotting up while running it through. Must be nice to have the free time to sit there and unknot all these stupid strands
It's actually not that hard. What you have to do is untwist the cord as you're pulling it through the knots. So if you just pay attention to the direction of the twists of the cord you can twist in the opposite direction to get it through the hitch knots.
???
Anyone else having issues with their paracord knotting up while pull through the loops?
Me too and no one has ever offered a solution!
I made some bottle raps with French hitching but they were permanent not adjustable. Might have to make one of those cows hitch ones
Will 50ft still be enough to do this on a yeti 36oz bottle?
wow what an awesome sub worth video. glad youtube suggested it to me
I truly like d video. I'm very excited to do it also for my aqua flask. Thank you
Que hermosura de trabajo tegido quería preguntarte en el país donde vivo no venden esa aguja cual otra puedo utilizar mil gracias por tu en señanza es muy entendíble y muy bien explicado todo dios te bendiga siempre y te de mucha vida y salud para seguir adelante con todos tus proyectos y sueños
How much paracord would you say is ideal for a 46oz yeti 9.5 inches tall? Thank you
what if you needed to use the cord , can you do this easily?
Did this to my hydro flask and it made my hands SO FREAKIN DRY… maybe use a paracord that’s been waxed or something instead.
I have no idea how to get that much paracord in my state.
Hey BIG BROTHER, Please make your MOD SANCTIFIED KNIGHT and RED BEET paracord Bracelet full tutorial video available on RUclips 😭 , as I am I teenager from India & unable to support you on Patreon (lack of money). Those two I liked the most & eager to learn than 😣😣😣😣😭😭.
PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE 🙏🙏🙏🙏