Do the wiring in this video also include the defroster wiring? If not, how do you install it? I've read the instructions, but im a visual learner. thanks
Hi, I just bought turn mirrors from muth turn signals, but I don't know how to install them on my 2014 Honda Accord Lx, Can you post a video or is it the same set up as this video? Thanks
Edit: Update to my experience with these mirrors after a year. I have found that rows of the LEDs, primarily on the bottom half, sometimes the whole bottom half on one side, will not work. Sometimes all rows will work, but at this point, the second row from the bottom on both sides of my mirrors rarely lights up. The product is very nice when it is working, but for $150+ I would expect to get more that 4-6 months out of them before rows start going out. I just finished installing the driver side mirror on my 2016. It looks good but I should not have started that project so close to sundown. Did most of the project with a small LED light and will only have one installed going out tonight. Just a tip to anyone doing this. In the video I only see the one black wire. On my '16 there are 3 black wires on the drivers side which led to some confusion on my part. After cutting some of the electrical tape I was able to pull the wires apart more and found 2 of the black wires to be in a pair. The third wire that is by itself is the one that needs to be tapped into. Also the side of the taps that you connect to the black and red wires for the mirror aren't very good. I had to pull them apart, crimp the wires in, and put them back together. When I tried crimping them as a whole the wire kept falling out.
Do these have anything to do with the power windows? My power window switches in all my doors don't work anymore. Everything was fine for about two weeks and now it doesn't. Would it be the wiring became loose or something?
Eric Lee While I am not sure if this will fix your issue, I did see this note on an installation video for installing the STI mirror turn signals. It is basically the same process as these. -Note: After you unplug the driver side window switch, the Auto Up/Down feature will not work. You can easily recalibrate it by simply rolling down the window and then rolling it up and holding it for 2-3 seconds after it closes. It should start working after that.
Ali Moeeny Yes they are visible. GM and other brands have been putting this in their cars for 5yrs+ from the factory. I would only see it as being distracting if you drove with your blinker on. And i f you did that this would tell you it's on so you can turn it off. ;)
Glad to see a great video on door card removal and turn signal mirror wiring info.
I have a 2016 base wrx. I ordered the JDM wide angle mirrors. Do you guys have a video that explains how to wire these up so the heat/de-icer works?
Brian McCarthy in for answers as well
Would like the answer to this as well
Any updates?
I really like this look. Do you have any that include the blind spot warning light? Because I have that feature on my '17 STi and I'd hate to lose it.
Do the wiring in this video also include the defroster wiring? If not, how do you install it? I've read the instructions, but im a visual learner. thanks
I wonder if these will also fit the newer Imprezas/Crosstreks, mirrors look identical and wiring could be the same as well.
Hi,
I just bought turn mirrors from muth turn signals, but I don't know how to install them on my 2014 Honda Accord Lx, Can you post a video or is it the same set up as this video? Thanks
Edit: Update to my experience with these mirrors after a year. I have found that rows of the LEDs, primarily on the bottom half, sometimes the whole bottom half on one side, will not work. Sometimes all rows will work, but at this point, the second row from the bottom on both sides of my mirrors rarely lights up. The product is very nice when it is working, but for $150+ I would expect to get more that 4-6 months out of them before rows start going out.
I just finished installing the driver side mirror on my 2016. It looks good but I should not have started that project so close to sundown. Did most of the project with a small LED light and will only have one installed going out tonight. Just a tip to anyone doing this. In the video I only see the one black wire. On my '16 there are 3 black wires on the drivers side which led to some confusion on my part. After cutting some of the electrical tape I was able to pull the wires apart more and found 2 of the black wires to be in a pair. The third wire that is by itself is the one that needs to be tapped into. Also the side of the taps that you connect to the black and red wires for the mirror aren't very good. I had to pull them apart, crimp the wires in, and put them back together. When I tried crimping them as a whole the wire kept falling out.
any install videos with the brz for these mirrors?
Any videos for the FR-S or BRZ?
any chance you have an install video for the BRZ?
Will this mod blow a fuse for the turn signal wiring system?
These turn signals match my 2015 Subaru Impreza I think they could fit. They match up alike
Do these have anything to do with the power windows? My power window switches in all my doors don't work anymore. Everything was fine for about two weeks and now it doesn't. Would it be the wiring became loose or something?
Eric Lee These would not affect the power windows. We would recommend checking your fuses.
Eric Lee While I am not sure if this will fix your issue, I did see this note on an installation video for installing the STI mirror turn signals. It is basically the same process as these.
-Note: After you unplug the driver side window switch, the Auto Up/Down feature will not work. You can easily recalibrate it by simply rolling down the window and then rolling it up and holding it for 2-3 seconds after it closes. It should start working after that.
Hi I have the brz and the question I have is when I run the wiring for the turn signals do I connect it to the doors? Not by the kick panel?
Will this work for a 2015 impreza base model?
This is probably a dumb question, but can you set up the running lights to act as the brake lights as well?
Do y'all make something like this but with blind spot detection too?
Passenger side doesn't have two holes to pry the mirror off... wish you would of shown this on the install
jorge ferro did you figure it out???? Having the same problem
Same ended up breaking my glass trying to reinstall.....was able to get it off
For BASE WRX please use the GRAY and BLACK wires at the bottom. GRAY (Positive) Black is (Negative)
+joe schmoe The Gray and Black is for the passenger side
excellent vid, just did my 2015 forester
How did you detach the mirror? I am unable to access the second black tab (further of 2 from door).
Would these mirrors also function with the 2015 WRX base model?
Yes
my base model does not have a small hole for the outboard clip. I have no idea how to take it off without cutting a hole, which i dont want to do...
Timothy Mlak Timothy, please email sales@subispeed.com with some pictures and we will be happy to assist you!
SubiSpeed I also am experiencing this issue, what was the solution?
Does this also apply to a 2015 wrx base model for wirings
Yes
Are the LEDs visible to the driver? isn't that distracting? I mean doesn't it prevent the driver from seeing objects in mirror especially at night?
Ali Moeeny Yes they are visible. GM and other brands have been putting this in their cars for 5yrs+ from the factory. I would only see it as being distracting if you drove with your blinker on. And i f you did that this would tell you it's on so you can turn it off. ;)
SubiSpeed got you
I dont see an answer on how to wire up the De-icer function on the base models that didn't come with pre existing defrosters.
I don't think this is an option that can be added that isn't factory.
is this available for 2012 wrx sti
I have a 2017 STI do I just tap into the green (positive) and white (ground) wire at the turn signal? Thanks
Did you ever figure this out lol I’m in the same spot
Correct me if I’m wrong but those signals are only in the mirror, so invisible to other drivers. What’s the advantage?
Paolo Milana they are visible to other drivers
SubiSpeed sorry i don’t see how. A blinker outside the mirror would be. Or maybe show it in the video?
Do you know if these would fit a 2012+ impreza? It looks to be the same, but would you be able to confirm?
Terry Wu We can only confirm fitment in the 2015+ WRX and STI.
It will fit
Can i add Sequential turn module to this?
How does the wiring work to add the heating option to the base models?
It works when you turn on your rear defroster and works in pairs with the mirror heater, I was taught how they work in school
are these mirrors heated?
Miguel Pascual Yes
Thanks
I would re-pined them
Or you can just peel off the mirror without taking off the cover, unless you’re doing more wiring.
?
1:37 bruuh..that gutter rash 😢
Those wheels are perfect, that's just a reflection of the lights.