How To Make Motion Sensor Light Switch using CD4017 & IR sensor at Home
HTML-код
- Опубликовано: 3 окт 2024
- In this 4017 project, I have shown how to make motion sensor light switch using CD4017 & IR sensor for the washroom. I have made the complete motion sensor circuit on a homemade PCB and use this circuit as the automatic washroom light switch. When anyone enters the washroom the IR sensor senses the motion and turns on the light and when he or she exit from the washroom the IR proximity sensor again senses the motion and accordingly turns off the light automatically.
During the tutorial video, I have shared the complete 4017 ic project circuit diagram, so after watching the video, you can easily make this simple motion sensor project using 4017 IC and use it as motion-activated light or motion-activated alarm.
To Download PCB Layout for the CD417 projects please visit the following article
easyelectronic...
Required components for the CD4017 project
1) CD4017 IC
2) LM358 IC
3) BC547 Transistor
4) 100uF 25V Capacitor
5) 1000uF 25V Capacitor
6) 220-ohm 0.25watt Resistors - 4 no
7) 10k 0.25watt Resistor
8) 10k Trimmer
9) LED 5mm - 2no
10) IR LED pair (Detector & Emitter)
11) 1N4007 Diode
12) 5V SPDT Relay
13) Connectors & IC Base
14) Acrylic sheet
I have used the 5V mobile charger to supply the circuit. Please take proper safety precautions while working on 110V or 230V AC.
You can also adjust the sensitivity of the motion sensor using the 10k trimmer.
After watching the video, you can easily design this motion sensitive light switch circuit for your home.
If you face any issues please let me know in the comment section.
#motionsensor #4017ic
------------------------------------------------------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Website: easyelectronic...
Facebook: / techstudycell
Instagram: / techstudycell
Telegram: t.me/techstudy...
-------------------------------------------------------
Other useful videos:
How To Make Motion Sensor Light switch on the breadboard
• How To Make Motion Sen...
IR Remote Control ON OFF Switch using 4017 IC & Relay
• How to make wireless I...
How to calculate resistor value for LEDs in a circuit for 9V and 12V
• How to select resistor...
How to make Remote Control Switch on the breadboard
• How to make Remote Con...
To increase the range, Pls refer to the new video on Motion Sensor Switch: ruclips.net/video/c_dnE6RRMCA/видео.html
What device can be bought instead of the 10k trimmer ? It is not available in the market to buy 10k trimmer device ?
Hello sir mujhe thodi help chahiye
Ye circuit meine banaya hai pr sirf light off ho Rahi hai on nhi ho Rahi hai
@@its_rahul7519 ap ny project banaya ha mujhy b bata dy k project kasa bana ha fail tuo ni huwa .ma ny b banana ha ma ny uni my submit karwana ha. or project k part kaha sy buy kiye hy.
can the above circuit helps in as '''off time delay '' of the load ??> as i want to use IR in hand wash> but IR circuit goes on n off when hand slightly goes off range > so I used some circuits , but they failed > so please let me know will this work as off delay ?
Very nice job Sir. Frome Pakistan Muhammad khalid khan Electronic Shope Clifton karachi. Thanks 👍 a lots Respactable Sir
Can you make my final year project
It would good if you explain how it work. Please describe working principle
Awesome, it would be useful if you also give a link where to buy these components online and how do we package it (I mean how to get a outer box where this pcb will fit in?)
Good job brothers
The LM358 is the worst chip I've every worked with. I will never use that chip again. Instead, I will and have used the U2531B chip. This is an amazing little chip and does an extremely good job with IR leds as an IR receiver.
Behtareen bhai jaan bahot ala
Very Didatic!!
Congratulations from Brasil!!!!!
I subscribed to your channel!!!!
Thanks
Superb sir.....getting person counting
Can we add LDR so that it only activates during darkness?
You do not know you are reviewing, but your ideas are beautiful and we hope that they will be clearer and without abbreviation because some people do not have an electronic initiator
Good job👍👍💯
Thanks
I really like your videos
thanks
Hello, Good Idea my friend
Very very nice project ❤❤❤❤
Your explanation is simply superb. So i subscribe your chennal. Please upload a video for spot welding machine to weld li-ion battery
Wow Bhai Ap to 🧑💻🧑🎤🧑🔧 hei🧑💻👍
Good project & very easily explained
Thanks
101% working hai kya???
Hi, friends! I'm from Brazil and i lovely your project. What's software do you to used to designed the schematic? Congratulations, i subscribed.
For this video you deserve a like, subscribe and big thanks
I'm searching for a long time without making arduino nano but you make it bro
Thanks
Try with a PIC lot more easier than ardunio
@@TechStudyCell Sirji isme 5v dc Diya gya hai extra ye kisliye hai
@@TechStudyCell Sirji isme 5v dc Diya gya hai ye kaise or ye connection kahan hoga
How to use the circuit in 220v input?
Very nice
Superb
Thanks
Amazing!!💯💯 would you please upload the diagram as a printable document? so that I can't print it with the correct dimensions.
please visit article... link in description
Great video thank you!
Hi, i like your video. But, how about using "230VAC to 5VDC (3W) Converter/Regulator" to supply our sensor and also the relay instead Phone Charger. Thanks.
Great work bro
Thanks
101% working hai kya???
Excelente video, muy bien explicado, mil gracias. Saludos desde Bogota - Colombia.
thank you
Thanks for eddition
Best Ever Diagram presentation on Actual Circuit Board
Jai Engineer
Jai Hind
Hi, I need a sensor switch to turn on a light (110VAC) when someone sits at the table, and turn off when he leaves the table. Can you show me how to do it? I do not mind getting an off-market product, but how to wire it to the lamp? Thank you very much!
Use flex sensor in the chair when a person sits the hair will flex backwards so that the sensor attached to it when there is a flex detecked the value will change to 1 and the program with Arduino or Nodemcu will switch on the light when the person leaves the sensor will compress and the value changes to 0 so that the light turns off hope it's helpful ✌️
Very nice 👍
Thanks
Your project is very good and admirable. I also want to make your project, but it's not easy to buy parts. I'd appreciate it if you could tell me if there's anything in the set or if it's a purchase site.
Should we insert program on it?
Ye kitnay volt pay work kray ga
Nice work
Thanks
Awesome job
I want to ask you that the lamp and pluck we have to connect each other or separately please tell me. And I have another question that you have taken some yellow color is this a wire or something else.
It works but it is wrong:
1) why to use a decade counter driver (4017) like a flip flop D? Use a 7474!
2) the sensor change its state every time, so if you cause two pulse instead just one, you can stay in the dark, or leave the room with the light on. None check of the right state; this can generate errors !
Very nice project and parts payed out well. How can I get a print out of the circuit board you used
Check description
Such a awesome video but I have a question. What if another person join the place before prior person leave? It will turn off only after person 2 leave?
To Tiago: Your question is very valid.
As it is triggered one pulse per switching,
that is: one for ON and one for OFF , Two persons could upset the On/Off sequence.
Obviously only effective for ONE PERSONs Entry and Exit. A possible solution would be to have a delayed Turn OFF switching
but that also, will not be error proof !!
I hope my answer on behalf of Tech Study Cell helps.
what happened when another person entered in room. means two persone one by one. It's become off or remain on??
How long the light glows once you cross the sensor (inside the room). Does it have time setting.
please give replies
The light will glow untill you cross the sensor again.
Thanks bro
Hi, can you send me circuit to make it by pcb manual by print at glassy paper and print at copper pcb
Download the PCB layout from article. link is in description.
شكراً- يتعذر الاشتراك ولا يوجد جرس-يتعذر التعليق-لا أعلم .
Nice
Thanks
🙆♂️🤳👏🇧🇷👏🇧🇷👏🇧🇷👏🇧🇷👏🇧🇷👏🇧🇷👏🇧🇷👏🇧🇷 SHOW
Do we use 220 volts without any problems?
ruclips.net/user/shortsZYz5hGpKyIQ?feature=shared
sir I make it but not working . i can't finding problem please help me.
Me to
superb i like it very much
Thanks
hi iwas one question the pot raplace 20k and relay is 12v can cahnge any part of project because i make it but relay continue is working how to
BRO in that there was no need to install ic 40 17 more relays instead of couplar ic and BT136. It would have been even better if you had put it
Bhai kya apne iss circuit ko banaye h
Work kiya hai
what if two person will entered in that same room . will it turn off light
Nice post.. How about sensor like street light
Hi.
Me simbal edala thiyana vidiha ganna puluwan kamayak thiyeda
Bhai wo input our output ko ac dena hai ya dc
Please make a video on Hall Censor working.
Very cool
Thanks
Sir pls pls tell wher i can get these items in online i didn't get
how much do all those units cost
An esp8266 and a relay with a motion sensor is all you need.
A little programming experience needed. With that you would pay 3 bucks at most for the 8266 about a dollar for the motion sensor and about 2 to 4 for the relay. so from 6 to 8 dollars. and with the 8266 you can set a time length for how long stays on.
The input used here is 5v battery.what happens whether we use 220v home power supply ????
Wo LED lamp hai wo DC 5v hai kya reply me
Man thanks for this awesome project u really awesome made this without a pcb with a clear layout ❤️
Glad you like it!
Sir ye project kaam nhi karta maine Banaya or comment me bhee bataya hai...?
@Mirza Hussain did your work properly
100% Working hai kya??
Sir please let me know till what distance can it catch??
Why we have used IC 4017.
Agrylic sheet change thing use , empty dot pcb board sir
You did not include a second IC, the small one, in your colour schematic Diagram. You use only one IC, not two.
Please clarify. Thanks
Hello sir I have come with a request saying that make the circuit with tsop please
Awesome
5V of mobile charger and what about bulb how many watts?
Can you inbuilt the 220v to 5v circuit in the same board
that plug and adapter part can you explain how you connected
Adopter output 5v for circuit and plug ac 110/220v for bulb
hi good job is very very good excatly one question this project 5V SPDT Relay i want use 12v relay can i change any component?
Thanks, yes you have to change the resistors as per 12v
give me circuit diagram Plesse
Demnik velne huk snejlev keàd👍
Agar 5v relay ke jagah 6v relay lagay to ....?
Sir IR sensor 3 leg wala hai to wark karega ?
I did it, why not?
Hi boss i do your projet he work i like it , is very intersting
Sir Maine Is Circuit ko Banaya But Isliye Kuch problem aa rahe hai please Reply me 🙏🙏🙏🙏🙏🙏
Sir Maine Is Circuit ko Banaya But Isliye Kuch problem aa rahe hai please Reply me 🙏🙏🙏🙏🙏🙏
Sir, can we use a 5v dc led light instead of 220 v AC bulb? please reply anyone if you know, I wanna make this project
Its not working.i have tried alot...dont fool the people with ur wrong circuits...
Sir light or relay not use tell me I'll use relay module
Veryyy cooool
Thanks
Super sir
Thanks
Sir ye Jo Ghar me Jane ke sath light jal Raha he .
Iske badle me agar ma ek voice add karna chahu to kya karna parega.
Example:-" Ghar me Jane sath sath ye bolega welcome "
bro wt component have to use in the place of board edge(vcc,gnd,out) u given in circuit
even i want to know , can you plz helm me out
Maximum Distence not explain ?
By add variable/R you can control the sensing distance
@@atech.industry where to add ?
You can set distance reng by using 10k trimmer
It's Ac or Dc?
@@waghmare35 that is no trimmer, it is preset or varieble rasistor
will it work on 9v battery
Very expensive complicated u should try open lm358 comparator
Bro i want this circuit
How should i get it???
Bhai ye apne circuit me out - gnd -vcc ke liy jo terminal nikale h uska kya use h bhai, muje please jaldi se jaldi reply krna.
Bro I am making this as a project for electronic and I have made this almost 75 to 80% but I am facing one problem when I pass the hand I front of IR led them only Red led is blinking and green is not working, I am geting the exect fault please help me . Thanks
Nice
Good evening, will you please send me ready circuit board thru courier
Hi, Friend ,
I have IR senser, than how to make this project with IR senser. Pls reply . Thank you in advance
So is it that: you initially have to turn it off and be outside, then start using it? I would have a circuit that recognize the direction of movement, ie; if the motion detected from outside to inside then Turn ON, and if motion detected from inside to outside then Turn Off. You may do so by using a simple microcontroller and a simple logic coded into the MCU.
Adding more light sensors should do the trick to detect direction on same circuit.
could be used as a security system it looks like, minus the light bulb.
Very good and amazing project, i made this but motion is not detecting after 1 inch, it's detect from 1 inch only, please help
bro can you plz tell me the name of the component that is below th 1000UF capacitor