How to terminate the AFL Fast Connector with a 900 um Fan Out Kit to 250um Fiber Cable

Installing the AFL FAST fiber connector to a fiber optic fan-out kit involves several steps to ensure a secure and efficient connection. This process requires precision and careful handling of fiber optic cables. Below are the general steps to perform this installation:
Materials Needed:
• Fiber optic fan-out kit
• Fiber optic connector (SC, LC, ST)
• Fiber optic cleaver
• Fiber stripper
• Cleaning wipes and alcohol
• Heat shrink tubing (if applicable)
• Visual fault locator (VFL) (optional but recommended)
Step-by-Step Installation:
1. Prepare the Fiber Optic Cable:
- Strip the Outer Jacket: Use a fiber stripper to carefully remove the outer jacket of the fiber optic cable. Ensure not to damage the fibers inside.
- Fan Out the Fibers: Separate the fibers from the fan-out kit, ensuring they are arranged in the correct order. The fan-out kit should guide you on how to separate and protect each individual fiber.
2. Strip the Fiber Coating:
-Strip the Buffer Coating: Using the fiber stripper, strip the buffer coating from each fiber, exposing about 1-2 inches of the bare fiber. Be careful not to break the fiber during this process.
3. Clean the Fiber:
- Clean the Bare Fiber: Use a cleaning wipe and alcohol to clean the bare fiber thoroughly. This removes any dirt or debris that could affect the connection quality.
4. Cleave the Fiber:
- Cleave the Fiber: Using a fiber cleaver, cleave the fiber to get a clean, precise end face. A proper cleave is essential for good connection quality.
5. Prepare the Connector:
- Prepare the Connector by following AFL instructions for your specific connector.
6. Insert the Fiber into the Connector:
- Insert the Fiber: Carefully insert the cleaved fiber into the connector. Ensure the fiber is properly aligned and seated.
8. Attach the Connector Housing:
- Attach the Housing: Once the fiber is secured in the connector, attach the connector housing. This typically involves snapping the housing for the SC and ST in place.
10. Inspect and Test the Connection:
- Inspect the Connection: Use a visual fault locator (VFL) or fiber optic inspection scope to check for any visible defects in the connection.
Tips for Successful Installation:
• Handle with Care: Fiber optic cables are delicate and can be easily damaged. Handle them with care to avoid breakage.
• Cleanliness is Crucial: Always keep the fiber end clean to avoid contamination that could affect performance.
By following these steps, you can successfully install a fiber connector to a fiber optic fan-out kit, ensuring a reliable and high-performance fiber optic connection.

[@JasonsLabVideos]

AWESOME VIDEO !! Good work love it !

[@somalsharma3175]

informative

[@beanbean321]

I like that cleave length chart . Any suggestions on how I can get one ? I tried the AFL website .

[@DiscountLowVoltage]

It's included with the AFL kit. I have an extra one. DM me a ship to address, and I'll send it to you 🎉

[@beanbean321]

@@DiscountLowVoltage : I sent you an Instagram message .