Barn Find CB750 Revival - Forks / Brakes / Wheels / Tires - EP5
HTML-код
- Опубликовано: 1 авг 2024
- Barn find Honda CB750 revival! Forks, brakes, wheels, and tires are all getting attention in this video! Now that the bike runs the focus is now to make it road worthy and to do that we have a lot of work ahead.
Watch as I rebuild the braking systems including new caliper seal, master cylinder rebuild, new brake lines, rear drum rebuild. Next up I focus on rebuilding the forks with new seals and mix-matching some parts with another set of CB750 forks I have. While the forks are off I installed some new taper roller steering bearings as a nice upgrade! Finally I turn my attention to the wheels and tires. The chrome on the rims was in poor shape so I decided to paint them black! I then fitted some classic looking Duro tires to complete the look!
Ultrasonic Cleaner mix: Half gallon of Simple Green Pro HD, some dawn dish soap, the rest (30L tank) of hot water. I vary the temperatures and time depending on what im working on. Link to the Simple Green here(Amazon affiliate link where I get a small commission if you purchase): amzn.to/3KPxFHx
Tires:
Front - Duro HF317 in 3.25x19 www.revzilla.com/motorcycle/d...
Rear - Duro HF318 in 4.0x18 www.revzilla.com/motorcycle/d...
Taper roller bearing conversion:
All Balls Racing 22-1011 - www.dimecitycycles.com/steeri...
If you found this video helpful or simply wish to support the channel further feel free to donate to the "Tip Jar" via the paypal link below! Anything is very much appreciated!
www.paypal.com/donate?hosted_...
Brick House Builds Amazon Storefront
www.amazon.com/shop/brickhousebuilds
For updates on this project as well as others be sure to follow along on all the Brick House Builds social media platforms!
Instagram - / brickhousebuilds
Facebook - / brickhousebuilds
Website - www.brickhousebuilds.com/
Tik Tok - / brickhousebuilds
#brickhousebuilds #CB750 #barnfindmotorcycle 
Авто/Мото
Love seeing the CX500 Scrambler build in the background at the end. That was one of the first videos of yours that I watched.
I like the fact that you take things one step at a time, and do things rite the first time !
I try to for sure. Stuff like the chain and swingarm bushings will get replaced soon but for now they are fine for a test ride.
It is so nice to know that I am not the only person left that appreciates these old bikes and goes to the trouble to renew instead of just replacing everything.
These bikes were timeless and are still unmatched in quality, ridability, and just being fantastic, well made motorcycles that are fun to ride!
That thing is looking great!
I'll be watching this video a few times I'm sure...lol.
I do love the pipes they put on these bikes.
Never liked the bell pipes, but I've always loved these.
This bike has been such a joy to bring back. You will love the next videos and continued progression
I like the choice of the black rims 👍🏻
Thank you. Id like it to be an anodized rim but its nice to just do a budget focused mod for once lol
The black rims look great and might have changed my mind on getting my wheels rechromed or replaced. Definitely getting the tapered steering bearings.
The taper bearings are a must IMO. Really improved feel
Making the grade slowly with this one. Thanks for sharing.
Thanks Murray. Look for a new video on the bike this Monday!
@@BrickHouseBuilds great news. Will be staying tuned.
Loving the CB rebuild so far B.J. , I've picked up so much good information and tips from you over the past year it's crazy. Keep up the good work.
Well thank you much Doc and I'll keep cranking the videos out
Detail ferfecto restor!!!!,from makassar indonesia
Thank you much!
Maravilhosos seus vídeos! Me fazem reviver a época q essas jóias rodavam entre nós. Lembra meu tempo de oficina.
Glad it brought those good memories
BJ your rims look sick! I love it. Classy, clean, tasteful. It breaks up all that shiny chrome. I will probably steal that look.. js
Thank ya!
looks good preserving the metal on the rims excellent idea get it rolling and do what you want to it GBU later
100% Ita not a perfect solution but gets me on the road to enjoy the bike
In the UK Sealey sell some extra long punches (presume a USA supplier sells an equivalent). Well worth it to greatly reduce the chances of belting your fingers when knocking steering head bearings out, etc.
Looking good and a nice pace. Wish I didn’t get easily distracted.
I could definitely use some
@@BrickHouseBuilds , code for them is AK9147. Certainly saved me some pain!
You've got to balance your tyres. It will make a significant difference!!! Youre videos are superb!!! Please excuse my spelling. Im 52 and I'm from Norway!!
Only at 90 do I feel anything on this bike. Ill balance eventually when I do wheel bearings
Great work buddy! 👍😎
Thank ya Mike
Thanks for posting. Looking good.
Thank ya Gary!
Zip tie method is brilliant!! Totally using that :)
Give it a shot! You will love it!
Smart idea with the tyre install using zip ties. Saves a lot of swearing and grunting! Always loved the Honda CB. So nice to see one being restored to its former glory. Great job! 😊👍🏻👍🏻👍🏻
Thanks Paul! The adventure bike world has turned me onto the zip ties and I haven't looked back
Another great video, forget about what the internet haters are saying out there. If there’s one thing I learned in my life is that you can please some of the people some of the time but you can’t please all of the people all of the time. It’s just much easier to piss everyone off and move on, you’re doing a lot more than much people out there. I think you’re doing a great thing by bringing these otherwise neglected or forgotten bikes back to life and that’s something I myself enjoy doing on my spare time when I have it. Thanks for the video and ride safe. She’s coming along beautifully, catch you on the next one.
Many thanks Miguel! Its a lot of work but I like it. Just want to be sure I'm still enjoying it
@@BrickHouseBuilds as long as you enjoy it that all that matters, in ways I can relate to you thanks for posting.
I've always loved the black wheels, did a Dennis Hooper inspired Harley with powder coated black wheels and chrome spokes!! Motors from the Past.
I really enjoyed this video; keep up the good work on this bike. I remember when they were brand new, and fab! Regards from Canada 🇨🇦
Thank you much Keith!
Great video !! Thanks
Glad you like it thank you!
Very cool! Honda used to make a factory dual front disc conversion, likely unobtanium in this day and age. Tapered roller steering head bearings make a huge difference too. Great tip on using zipties to secure the tube inside the tire and then mounting it! Sure beats heck out of risking pinching a tube(thinking all of us have been there & done that with our bikes).
3 master links? Someone pieced together a drive chain for that bike for sure. I'd invest in a fresh drive chain.
Glad to see this SOHC 750 Honda getting pressed back into service, great video! Thanks man!
Thanks Mark! I plan to eventually do a dual disc up front. I have the matching rotor and caliper mount already but need a caliper and likely a goldwing master. That will come in time. The biggest benefit to the zip ties is that you are only sliding essentially one bead over the rim instead of two. It is so much faster!
That's a novel way of getting a tyre and tube on the rim, very good......
It makes quick work!
Looks great so far!
Thank ya!
Probably the most comfy bike I ever owned.
I mean those Silverwings like you have are plush!
Great episode! Dont mind the haters, saw your post a few days ago. I like your videos, helped me ALOT! Cheers from Finland.
I appreciate that! Glad they are helpful!
Hello B.J. Nice to see the bike being brought along in a sympathetic manner. Great video covering many facets of a rolling restoration. I hope it inspires others to have a try at this themselves.
I must admit I had to re-watch the seal going into the fork,…the light shining on the seal made it appear to be upside down! I knew that would not be the case, so it was a weird illusion!
Keep the video’s coming!
Cheers Kevin
Thank you! Fork seals can absolutely be deceiving and take some studying to make sure they are the right way up but yes these are in correct. Lots more on this bike to come as I enjoy it
Great work bud, professional as well🏁
Thank you much Jim!
Great video BJ. Allot of work done there.
Thanks Mike, had to talk much less to fit this all into a reasonable length. I have a ton of clips for the next episode to go through as well
Sweet jams man! I recently started fixin up my girlfriend's bike I got her. 82 CM450A She cant do a clutch and originally picked it up for 300. Ran through the carbs then synced and tank. Inside the tank was flawless, and then electrical and brakes and tires. Putting a new gear shift arm in and a new ignition switch in it to get it back to road worthyness lol
I have really had some fun on the 400t bikes! She will have a great time on it
Excellent vídeo my friend greetings 👈🏋️
Thank you much!
Gracias por tus vídeos, he aprendido mucho
Thank you much Franklin!
That zip tie method is genius!
Definitely not my idea but once I tried it I am hooked.
Really good progress BJ - looking good. Nice to watch you work - loved the opening sequences - 4 minutes before you even said anything - cool concept ;) Worked well
I actually didn't plan that lol. In editing I was getting worried but it seems kinda cool!
Yaaaaaaas! Revive all the old Hondas xD Great work, Bj!
Thank ya!
Another good video and very helpful aswell.keep up the good work ride safe bro 👍👍🤘🤘
Thanks Daren!
I had never seen the zip ties before but will definately be using that trick !
Once you do there is no going back lol
Great content as always - I hope that the new venture is taking off as well :)
Thank you! It goes live this Monday and we are excited!
Great work as always BJ
Thank ya Brad!
@@BrickHouseBuilds how long do you leave parts in the ultrasonic cleaner (on average)? I.e. - carbs, calipers, average filthiness
Between 5 and 10 minute sessions. Carbs usually require 2 to 3 10 minute sessions for example
@@BrickHouseBuilds awesome, cheers
I like the black wheels man! Looks good so far!
I dig it as well. Thank ya!
Making progress 👍🏼👍🏼
Getting there for sure!
Looking good. This series takes me back to junior high when my dad had a Honda 750 in the mid. 70s. He ended up building a soft tail chopper out of it for him and mom. Seeing this makes me wish I could gets my hands on one to restore. Keep going can't wait to see how it turns out.
I've been seeing a few soft tail chops being dug out of garages and barns so there is still hope!
As always, great informative content BJ! I too love the black rims and am intrigued by the ziptie method. I'm at that point on my Triumph resto and will probably go the same route, probably with some Duro 307 knobbies. Oh, don't throw out those cocktail shakers if you replace them...they'll be "period correct" on my Triumph!
Thanks Butch! I won't throw them away but they will definitely be replaced in time
As we say over here, that looks tasty!
🙏🙏 thank ya!
I’ve been wanting to black out my rims since I got my 78. It looks soo good
Just makes a whole different bike!
i love your channel..awesome
Thank you much!
Looking forward to de-rusting of the fuel tank can't wait.
I really want to make it a very info packed video so I'm excited to make it
There is literally no pleasing some, really enjoying seeing your bike coming back to life…..keep on keeping on. It’s your content forget the haters!! Or just remove 👍👍
Oh and black wheels is a good look in my book, bring on more CB progress…..
Thank you Ian! Again I hate to just block people but now they give me no choice
I'll have another cb750 video Monday!
@@BrickHouseBuilds Cool 😎 I’ll be watching
Nice job man I’m keen on the black wheels these old cb750s r all over the place they make a nice cafe not sure how many Honda made but they made em prettty durable My old Kawasaki z1000 clutch cable broke at around midnight on a motorway a kind ol chap picked me up on one was showing about 60000miles but I’m guessing it was more ran like a top I’m also watching tomboy a bit as she’s building her one into cafe 👍
Thank you! I just thing the black rim look on these bikes is perfection so I'm happy to do it on the cheap lol. I have seen her videos pop up but have only seen the first episode I believe.
Love to get my hands on one but they’re hard to find at a reasonable price in the UK.
Yea we are lucky enough to still have them at fair prices
Thanks for the great video. I used to own a 1977 CB750 about twenty years ago. Seeing your bike brings back many memories. Keep up the great work. How is the CBX project coming along?
Thanks Brad! The CBX has not made any progress since my last update unfortunately. With the new parts venture starting up that has required a ton of my time to shift my business around so the cbx has just sat idle. The next move is still to vapor hone the cases and begin reassembling the engine.
IM GOING TO TRY THAT ZIPTIE TRICK!
Once you do there is no going back! Worth the price of the zip ties 100%
I'll link a few parts sellers in teh description. I love it
Yup, they are linked
@@BrickHouseBuilds I loved the misprint.
The black wheels might upset purists , but as a CB series fan . The wheels look great , they really do .
Great video 🤗. Couple questions?? I changed out the std ball bearings in my 85 CB650SC to TRBs. (This was a long time ago, so bear with me). I found I couldn’t get the tension on the bearings where they were just right. Too tight, and the bike would weave going down the highway, too loose, and, well you’d feel the slight slop in the triple clamp using the front brakes. I switched back to std ball bearing (new races and new ball bearings of course). I had that mc a long time, and I thought I switched back to TRBs, but I can’t remember, BUT, in your experience, have you ever noticed a “weave” induced but over tightening the triple clamp bearings? I’m not saying you over tighten the new TRBs, but was curious if you’ve had any weave/tracking issues using TRBs and/or having them too tight? Anyways, great trick with the tie straps. Heard about it, but Never seen it done👍 Great job 🤗😎👍
Hmm I can't say I've ever had trouble getting TRB set up just right. I wonder if there was something bent or slightly misaligned on the 650 that was causing that. It can be tricky to find that balance and I'm sure ill have to go back to adjust these but I can get it in the ballpark.
Hay from nz . In sittn here with my front break and swingarm assembely and im trying to find replacement bolts to reattach and the adjustable bold is slightly s/bent and had no groove for setting spring tension . Sucks being in nz . Cant find yet .
That can definitely be frustrating
I rode my friend’s 1970 cb750. He rebuilt the front and rear brakes. The front brake is stunningly bad; the very definition of "wooden brakes".
Definitely not great but my klr650 may be even worse lol
@@BrickHouseBuilds Wow. No excuse. Anyways, you’re taking the right path with the CB. It’s an iconic motorcycle and will always hold its value. When I rode my friend’s 1970 cb750, it was the first time I ever rode one. It felt like I was riding an important piece of history.
Class time. 〰✨〰. ✨👍✨ 〰.
I like it. Will you change the tailpipe looks like a British bike one. All the best from England ❤️👍🔧🏍
Oh those pipes won't be on for long 😎
That was smart, putting the top end of the rubber boot on the ear before sliding the fork in. It seems obvious, but that's the first time I've seen someone do it that way. Did you tape off the spokes when you painted the rims... and what kind of paint did you use?
Thank ya Dave! Are you talking about the entire headlight mounting bracket and fork boot? I've actually never looked at how anyone else does the job so this is just how I went about it. Not sure if its unconventional or not. For the paint I used an SEM primer and trim black. I didn't mask and simply went back and wiped the overspray from the spokes after I was done. I figured both methods were equal in time and materials.
Alright now. There is more information here. Did you actually wipe each spoke after painting the rims? I"m looking forward to try that o so brilliant zip tie technique on some new tires. The rear brake redo looks pretty normal. But not gonna lie. B.J. ~ your work with a toothbrush and cleaning up metal surfaces is way way over the top. I think I'm going to kick the snowblowers off the motorcycle lift and just begin with a toothbrush. Thank you again for all of this. Just great! 〰✨👍✨〰
Yes I actually did wipe each spoke. I figured it was the same amount of time as individually taping them off. The toothbrush is my secret weapon
When you paint the rims, do you replace the spokes after? Or how do you otherwise save the spokes from catching paint?
No I simply wiped them off after with a rag and acetone. Same labor as taping them off individually
Wow, I really like the black on the wheels! Just curious whether you have ever color matched wheels to the green of the original tank color? I'm thinking of doing exactly that with my '73 CB 360T. What are your thoughts on this? Cheers
I've never color matched rims to paint. Just my opinion but I don't prefer the looks. We can all be different though
Do you wipe off the spokes with solvent after spraying the wheel? Looks good
Yes I did. I figured the same amount of energy and consumables if I would have masked
@@BrickHouseBuilds Makes sense.
What are you spraying for the zip tie method? Soapy water or the PB blast chain lube? Or silicone lube, I couldn't really tell lol. Is that just for wheels with an inner tube or is this great for tubeless as well? I image it's great for both, I need to do my own tires some time, local shop only charges $50 if the wheels are off the hike though.
Silicone spray. Great for both tube and tubeless
I"m curious.... Were all of the wheel bearings still good?
They felt fine rotating by hand but are something I want to replace in the near future
I had the same reaction on a Timelapse Video restoring BMW steering rack… it was like a piece of art but the people hated because it’s not a tutorial… people blame your for their wrong expectations… but I still wonder why u block them… let it be it ist waste of time :) good luck 🍀
Thats definitely frustrating! I'm trying to crack the code of people wanting me to narrate the videos while also talking less, showing every detail yet making the videos shorter lol. 😅😅
Painted the rims with spokes, then spokes were magically cleaned off? Did you just go back after painting them and clean them off individually? Time consuming? Was there a trick?
I went back and used cloth strips soaked with acetone to clean them off. I felt it was the same amount of labor as individually masking
Lovely bike and I agree with your view on the wheels painted black to protect them for the future. Who was playing the music from around 14:00 onwards?
Thank you! That song is here:
ruclips.net/video/ub9Xc1svdxY/видео.html
@@BrickHouseBuilds thanks, BJ. I’ve listened to all four of the tracks and love that style of music.
@@Retirement_Life I've been really trying to cater the music to my audience which has split. This bike and my cbx draw a more "experienced" ;) crowd so blues/rock/guitar focused music. My cx videos and other builds I have more lofi/beats/uptempo tracks. Glad you like it and I'll use more of it
What tires ya got there?
I like em
Im looking for a set similar to those and a set similar to the real chunky ones on the brown Honda above.
They are linked in the description actually
I use ziptie method and really pleased with it. Do you balance wheels?
I dont typically but its definitely something I should work to do more
@@BrickHouseBuilds I do but was wondering if I should :)
Hey BJ - who is you preferred vendor for CB750 carb rebuild kits? Starting my first CB750 "refreshtoration" this week and it'll be one of the first jobs to tackle. Thx!
Refreshtoration is a term I'm now stealing lol. I typically just buy the rubber pieces and gaskets as I clean the original brass. I know dime city cycles, 4into1, and randakkas all sell carb kits for the bikes that include the brass but always inspect carefully to make sure all the parts are correct
@@BrickHouseBuilds Darn, should have copyrighted "refreshtoration". lol
@@donzimmer63 Its a great term!
Hi you are not balancing those wheels? Regards from Poland. Love you chanel
I did not balance them. If they need it I will
What tires did you put on those bike? Duro?
They are linked in the description actually
bro chance the chain
What?
i have a '79 on its way from Montana. It has a broken odometer; is that common?
That could be caused by the cable, the drive unit on the wheel, or the gauge having an issue itself. Unsure if its common but you should be able to repair it
@@BrickHouseBuilds i was just a little sceptical about getting a bike that I don't really know the miles of, but it's not like they put 50k on it after the odometer broke. I'm sure there will be more to fix once I get my eyes on this bike.
Not trying to sound dumb, but you don’t need to balance the new tires?
Not dumb. I just typically don't which is not something I advise. This is the first bike I've felt it on and I do need to address it.
@@BrickHouseBuilds ok, thanks for the reply, good to know.
was that the joe rogan mr beast pod cast lol?
Dang good ear!