Hi, I'm learning from you as an absoule beginner, I started from your tutorial #1, for me it's been a huge struggle, it's probably taken me about 28 hours just to get to this point. I spent close to two hours just to be able to copy what you did here (maybe it was intended to just watch, but I had to do it too). Anyway thank you.
I am taking a class on SW right now, your tutorials are so much better. I have a few questions, how possible to ask you on how to do a certain section of the part I'm working on. Is there a way to send you a part that we should be working in my class but couldn't get on the book I'm reading? I'll appreciate if you could help me.
@@CADCAMTutorials please i need ur help : when i make render for the finish product it gives me this error message : photoView 360 has experienced an error and must shut down
Sir in Solidworks 2020 many orientation/twist type is not available can you help me with this problem?. And Thank you sir for providing this free course, it was really helpful.
Sir, I am not able to use the ' keep normal constant ' option. Follow path option is working but keep normal constant doesn't render the object. And it is showing Rebuild error' sweep operation failed to complete.
This does not work for me. When I tried to recreate your example exactly, selecting guide curves does not work. The splines have a pierce relationship with the ellipse as well.
Great video, I just had one question, when you twist along the path, the twist twists to the left, is there any way to make it twist to the opposite direction?
Im using Solidworks 2017 and I dont why this version only have KeepNormal Content and Follow Path in Profile Orientation theres no Twist along path etc.
I have problem creating swept with guide curve . Which don't works. I can't select the guide which I was drawn. and I can't create swept part like your example . could help me in this case..... Pls
Splines can not be created with dimensions. At the most you can give dimensions to points, it is passing through. If you want dimensions then you will have to use arcs.
Kumar- To understand "Spines", think about how boats are made from wood. The point is equal to the rib on the side of a ship hull. The graceful curved line of a spline is equal to the wood plank that bends when it is attached to the ribs.
This is way better than actual SW course that i took. Ez and quick explanation. i love this
Thank you... This tutorial really help me with sweep & sweep cut errors
Glad it helped!
Hi, I'm learning from you as an absoule beginner, I started from your tutorial #1, for me it's been a huge struggle, it's probably taken me about 28 hours just to get to this point. I spent close to two hours just to be able to copy what you did here (maybe it was intended to just watch, but I had to do it too). Anyway thank you.
Another great pedagogical tutorial. Fantastic! Uni lecturers could take an example of your teaching style. Concise and easy to understand.
thanks!! you saved my project!
You're welcome 😊
Thank you, in 2 minutes you explained guide curves better than my engineering professor
Glad to hear that! 😊
Excellent explanations, easy to understand. Thank you very much.
Thanks for your time for us beginners. Its way better than what i see from other videos
Thank you so much for this enhanced video!!!
I am taking a class on SW right now, your tutorials are so much better. I have a few questions, how possible to ask you on how to do a certain section of the part I'm working on. Is there a way to send you a part that we should be working in my class but couldn't get on the book I'm reading? I'll appreciate if you could help me.
Thanks_ So helpful !
You're welcome 😊
Thank u.. 🥰🥰
You’re welcome 😊
really good, thanks
Glad you liked it!
Thank you so much sir
You're welcome 😊
Thank you for teaching
Thank alot
You're welcome 😊
thank u so much
You're welcome 😊
@@CADCAMTutorials please i need ur help : when i make render for the finish product it gives me this error message : photoView 360 has experienced an error and must shut down
Thank you very much.Lesson wasbeen good.(in İstanbul)
Thank you . Sir
Sir in Solidworks 2020 many orientation/twist type is not available can you help me with this problem?. And Thank you sir for providing this free course, it was really helpful.
same here. kindly help us with this problem. thank you
How Did you Hide the plane in which you drawn circle at 3:46
Bra video!
thank you
You're welcome 😊
thank u sir
So nice of you 😊
Love it
I have a problem that is options is not as you have explained i work in 2020 version is that the reason ?
Yes
Sir, I am not able to use the ' keep normal constant ' option. Follow path option is working but keep normal constant doesn't render the object. And it is showing Rebuild error' sweep operation failed to complete.
sir can you tell me how you select multiple profile sketch
can i make multiple path for one profile? so that they connect on one end?
This does not work for me. When I tried to recreate your example exactly, selecting guide curves does not work. The splines have a pierce relationship with the ellipse as well.
I have same problem
Sir , There are no options in SW 2023 as you are showing . Am i doing something wrong ?
Great video, I just had one question, when you twist along the path, the twist twists to the left, is there any way to make it twist to the opposite direction?
there is the only way to make two sweeps starts from the opposite direction twist along the directions
Im using Solidworks 2017 and I dont why this version only have KeepNormal Content and Follow Path in Profile Orientation theres no Twist along path etc.
YOU CAN FIND THE VIDEO RELATED TO THIS ON "EVLANTUS" CHANNEL.
@@Evlantus thanks man finally after 2 years
How to mate spring with hole in center
Sir I am unable to use Reference feature under this sub section only Mate reference is comming but not other options..
You need to exit a sketch first.
At 1.22 why we use 'select'. If we are not selecting then what will happen
I have problem creating swept with guide curve . Which don't works. I can't select the guide which I was drawn. and I can't create swept part like your example . could help me in this case..... Pls
Guide curve should touch the profile.
@@CADCAMTutorials yes it does
With Pierce relationship
How to set permanant unit as MMGS
Click on the units button provided at lower right corner.
I could not make Twist along path with normal constant option . The outcome is not same as yours.
great job , how to contact with you ? please
Sir how can we use spline with dimensions . Like how we can be assure that it is perfect with dimensions. I hope u got my query
Splines can not be created with dimensions. At the most you can give dimensions to points, it is passing through. If you want dimensions then you will have to use arcs.
Kumar- To understand "Spines", think about how boats are made from wood. The point is equal to the rib on the side of a ship hull. The graceful curved line of a spline is equal to the wood plank that bends when it is attached to the ribs.
What's name this software ???
+adeel munir Solidworks