I was in despair over a seemingly broken Tab 3 until I followed your instructions. The LCD cable was out by just a small amount and that was enough to have the screen show only a black screen. After removing the cable and then reinserting it in more firmly the screen came back on. Much appreciated for a tutorial that was both informative and easy to follow.
No problem! 😀👍👍 If anyone does get this probably and you can't fix the screen straight away make sure the tablet is charged. Our tablet unfortunately ran down to 0% battery and since then wont charge beyond 80% but on the plus side no more screen problems.
does anyone know why my power button stopped working and my headphones are recognised anymore after intalling the battery? this process is so easy to mess up its ridiculous.
@@fiveminuteman - Taking into consideration... it is 1: Lift up connector tab... 2 move (pull) ribbon cable lightly out... SO, how difficult is it to re-insert it? And press GENTLY down the "hingy" black connector "thingy". (Might be a good idea to switch on and test the Tablet before replacing the back cover)
I was in despair over a seemingly broken Tab 3 until I followed your instructions. The LCD cable was out by just a small amount and that was
enough to have the screen show only a black screen. After removing the cable and then reinserting it in more firmly the screen came back on.
Much appreciated for a tutorial that was both informative and easy to follow.
No problem! 😀👍👍 If anyone does get this probably and you can't fix the screen straight away make sure the tablet is charged. Our tablet unfortunately ran down to 0% battery and since then wont charge beyond 80% but on the plus side no more screen problems.
I need to do mine tomorrow. This is going to help a million.
It's fairly simple to do👍
Thank you for a brilliant tutorial, I did it !! and its working again.
Very informative exactly as required.
Glad it helped
I connected mine to the wrong voltage, so it shorted. Which part is it that I have to replace?
Excelent!
Great stuff 😃
soft work. 😜🤙
does anyone know why my power button stopped working and my headphones are recognised anymore after intalling the battery? this process is so easy to mess up its ridiculous.
👍
Many thanks
Wrong, wrong.
You mustn't open this tablet in this way.
It's fine.no damage no Mark's left.
@@fiveminuteman But that's not the correct way to open it. You must remove the backcover+ case together, not only back cover.
I have worked on 100s of these tablets and had no problems.
You speak to mutch and not show how to replace the kabel.
Disagree qnd you would have to be pretty stupid not to understand how to replace the cable.
@@fiveminuteman - Taking into consideration... it is 1: Lift up connector tab... 2 move (pull) ribbon cable lightly out... SO, how difficult is it to re-insert it? And press GENTLY down the "hingy" black connector "thingy". (Might be a good idea to switch on and test the Tablet before replacing the back cover)
@@The-truth-is-valuable. all worked fine and ribbon cable was in snugly👍
@@fiveminuteman (I could see that, and I thought you would understand it was not meant for you. It was in support of your reply to him)