Pretty sure on the 3m worktunes, a single press of the button pauses your audio, double click goes to the next track, and triple click goes back to the previous track. Volume is controlled on the native device, and I think holding the button down cycles the power on and off. If you walk away with the native device while they're on, after 5 minutes of no connection they automatically power off as well.
I work manufacturing in a mill that is around 90dB and the 3m work tunes are perfect. I usually just listen to podcasts and can hear everything perfectly clear at about half volume or so while still being able to hear the equipment. Also, as previously stated, the one button has multiple functions. Long press for on and off, single press for pause/play, and double press for skip track. Volume is still controlled on the device but I have not had any issues because I just set it to what is comfortable and then pause the audio if I need to pay more attention or talk to someone.
Followed your advice. Very happy with my new 3M Worktunes while mowing, blowing, and edging. Adequate volume and battery lasts all day and then some. Mostly audiobooks and occasional music or Podcasts are my preferences. The hands free phone feature works great, although I must shut off or throttle down noisy equipment so the person I am talking to can hear me. I can wear a baseball type cap without muff interference over the ears. Comfortable to wear the majority of the day, but towards 5-6 hours need to take a break for awhile. Thanks for the great review, just what I was looking for in my situation. 😎
Hey Steve,there are two pads inside each muff . I made a whole in the first one and covered it over with the second . Works great. Some come with the cut some without guess it's factory fault. Hope this helps
Other than volume control, the 3M unit does everything I need. If the phone rings, one tap on the button will answer it. For playback for audio books or music one tap will pause the sound and another will restart. Two taps skip and three taps go back a chapter or song. So it's not as bare-bones as you think.
The 3m I really like but the wire eventually comes loose to the point where it loses connectivity. That’s the only use I have. Buying my 3rd pair 4 yrs.
Thanks from a fellow Sailor (MRC Ret.), this is about the newest video on this subject. I’m looking at the 3M. When I’m on my tractor, weed eater or chainsaw I want to listen to something. I’m retired, and I like to listen to Dan Bongino, and I don’t want to miss the news when Joe Biden gets thrown in jail. Yes I listen to a lot of podcasts with a little music in between. Thanks again Shipmate.
Get you some 3M WorkTunes Connect + AM/FM Hearing Protector instead. They have Bluetooth, AM/FM radio, microphone, etc. They also have excellent hand controls. If you don’t like the antenna, you can zip tie it down. (you could cut it off for that matter if you don’t want to use the radio) I have the older model without the microphone, but I don’t need to talk to anyone. Get you some PROHEAR GEP01 Gel Ear Pads (Upgraded) for 3M PELTOR Headsets. These appear to be the exact same thing as the ones from 3M, but at 1/3 the price. (perhaps from the same factory) I’ve been using them for quite a while now. These are excellent at keeping sweat and such out of the ear pads and also seal better; perhaps improving the sound dampening ability. They are a perfect fit, but you need to use your “man hands” to snap them in. Once they are in they’re not going anywhere, just like the factory originals.
many thanks! well done, detailed, intelligible, shows the experience you have and hits straight to my everyday jobs so it helps a lot I also wish 3M did active BT version of the X5A which I have (and replace\maintain) ever since was introduced (before I loyally used Optime III) *for the superior class 3 attenuation of about 30dB when used & maintained correctly.. I really do wish they did that
Interesting. I am looking forward to retirement, in [small] part because Bluetooth is not allowed where I work. There is a third, central piece to my hearing aids I can't have, which is a Bluetooth interface. They would allow whatever the source to be sent to my single channel (R-ear), and I could still wear hearing protection over the hearing aids (it's not a large external bud) if needed. There aren't Bluetooth buds that also offer hearing protection, that you might like?
Guy was five minutes in before he said anything useful about the headphones told us your entire life story except you didn’t tell us your dogs name tell us your dogs name so we know everything about you. This is the most rambling Guy I have ever heard.
![ROSÉ(로제) - APT. (Band VER.) (With. 이영지) [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/IW8qaemx74g/mqdefault.jpg)
Pretty sure on the 3m worktunes, a single press of the button pauses your audio, double click goes to the next track, and triple click goes back to the previous track. Volume is controlled on the native device, and I think holding the button down cycles the power on and off. If you walk away with the native device while they're on, after 5 minutes of no connection they automatically power off as well.
I confirm this I use mine daily’s at work one click pause two click forward 3 click reverse
A single press is also used to answer a call if you get one
Does everyone else have issues with the wire eventually coming loose just a little and lose sound. I’ve had 2 pair and both have had this issue.
@@rogueJnope
I work manufacturing in a mill that is around 90dB and the 3m work tunes are perfect. I usually just listen to podcasts and can hear everything perfectly clear at about half volume or so while still being able to hear the equipment.
Also, as previously stated, the one button has multiple functions. Long press for on and off, single press for pause/play, and double press for skip track. Volume is still controlled on the device but I have not had any issues because I just set it to what is comfortable and then pause the audio if I need to pay more attention or talk to someone.
Bro has a Bowflex in the background with no shame whatsoever
This man is my hero
Awesome. I run a large parks and rec department. I love to get out there with my teams. I like to listen to music while making parks look great.
I have been using the 3M ones for a couple years, keeps your ears warm plowing snow on the ATV in Minnesota winter too.
Followed your advice. Very happy with my new 3M Worktunes while mowing, blowing, and edging. Adequate volume and battery lasts all day and then some. Mostly audiobooks and occasional music or Podcasts are my preferences. The hands free phone feature works great, although I must shut off or throttle down noisy equipment so the person I am talking to can hear me. I can wear a baseball type cap without muff interference over the ears. Comfortable to wear the majority of the day, but towards 5-6 hours need to take a break for awhile. Thanks for the great review, just what I was looking for in my situation. 😎
how are they going?
Hey Steve,there are two pads inside each muff . I made a whole in the first one and covered it over with the second . Works great. Some come with the cut some without guess it's factory fault. Hope this helps
Exactly the kind of comparison I was looking for. I probably would've done the same thing, started with the dewalts and then moved to the 3m.
Other than volume control, the 3M unit does everything I need. If the phone rings, one tap on the button will answer it. For playback for audio books or music one tap will pause the sound and another will restart. Two taps skip and three taps go back a chapter or song. So it's not as bare-bones as you think.
The 3m I really like but the wire eventually comes loose to the point where it loses connectivity. That’s the only use I have. Buying my 3rd pair 4 yrs.
Still rocking the 3M Worktunes?
Thanks from a fellow Sailor (MRC Ret.), this is about the newest video on this subject. I’m looking at the 3M. When I’m on my tractor, weed eater or chainsaw I want to listen to something. I’m retired, and I like to listen to Dan Bongino, and I don’t want to miss the news when Joe Biden gets thrown in jail. Yes I listen to a lot of podcasts with a little music in between. Thanks again Shipmate.
Get you some 3M WorkTunes Connect + AM/FM Hearing Protector instead. They have Bluetooth, AM/FM radio, microphone, etc. They also have excellent hand controls. If you don’t like the antenna, you can zip tie it down. (you could cut it off for that matter if you don’t want to use the radio) I have the older model without the microphone, but I don’t need to talk to anyone. Get you some PROHEAR GEP01 Gel Ear Pads (Upgraded) for 3M PELTOR Headsets. These appear to be the exact same thing as the ones from 3M, but at 1/3 the price. (perhaps from the same factory) I’ve been using them for quite a while now. These are excellent at keeping sweat and such out of the ear pads and also seal better; perhaps improving the sound dampening ability. They are a perfect fit, but you need to use your “man hands” to snap them in. Once they are in they’re not going anywhere, just like the factory originals.
I was wondering why you didn't mention the 3.5mm jack in the bottom of the DeWalt set, so I wonder if it would remedy the volume issue.
About the 3:30 mark he starts the comparison.
many thanks! well done, detailed, intelligible, shows the experience you have and hits straight to my everyday jobs so it helps a lot
I also wish 3M did active BT version of the X5A which I have (and replace\maintain) ever since was introduced (before I loyally used Optime III) *for the superior class 3 attenuation of about 30dB when used & maintained correctly..
I really do wish they did that
Thank for sharing I was about to buy DeWall but if Audio is low I better stay away from it then.
i work in a factory where the noise level exceeds 84db are these gonna be safe for me?
Thanks for the review Steve. Helps.
Thanks Steve helped me make my decision !
Great vid, thank you.
Excellent review.
Use the 3M myself on the tractor and while forging
Thank you 👍
Interesting. I am looking forward to retirement, in [small] part because Bluetooth is not allowed where I work. There is a third, central piece to my hearing aids I can't have, which is a Bluetooth interface. They would allow whatever the source to be sent to my single channel (R-ear), and I could still wear hearing protection over the hearing aids (it's not a large external bud) if needed. There aren't Bluetooth buds that also offer hearing protection, that you might like?
Can you wear glasses with these? I feel like you would have to break the seal to keep it closed against your skin for glasses.
I suspect both are made in China. Is that correct?
Who cares, nothing is made in American. The phone, laptop, and most of your clothing is made in China.
Guy was five minutes in before he said anything useful about the headphones told us your entire life story except you didn’t tell us your dogs name tell us your dogs name so we know everything about you. This is the most rambling Guy I have ever heard.
you’re rambling