Hello, I had already given up on this drone, I followed your tutorial and managed to pair it again, congratulations and thank you very much for your help.
Great video and a big thanks to all involved that figured this out. I may have missed it in the video but where does the new boat loader image on the SDCard come from? Can’t wait to try this as we have three Karma drones with this issue. 😊
Boa noite amigão, sou do brasil, tenho noção de solda em eletrônicos, to acompanhando os seus videos para tentar recuperar o meu karma, fiquei com duvida, qual adaptador vc usou para ligar o karma com o computador ?
We dont use a JTAG adapter its a USB to serial device (cp2102 from memory), you can see more about it in this video ruclips.net/video/05uqpPYnMg8/видео.html
Hello thanks for the educational videos you've been putting out. I've watched this video several times and I'm not understanding the adding of the SD card port. I don't see you ever put a card in there. do you put a card in there? My drone has that Port I noticed that years ago and thought that was a possible software update sd port.
Yes , you need to download this image and the tool, burn it to a micro SD card and insert it into the slot before triggering the SD card boot. drive.google.com/drive/folders/1l0vRHL0187gdtYLM0ficCJhaDlT93Fur
@@bozmanx thanks for the tip I have watched all of your videos I'm pretty much got to understanding of what's going on. Managed to get one of my karma's up and going without doing any of this the other night. My other one though I am pretty confident it's issue is a software issue. Mine all have SD card slots on them already which is a plus. I just got my resistors yesterday in the mail that's the last of what I needed so I'll be attempting this in the next. Thank you so much for taking the time to share this information a lot of us are very frustrated..
Hi, I have the pairing issue. I see there are many videos of fixes and am confused as to what all is necessary. Is there a recent comprehensive video or written description of what is required? Thank you!
If you watched the full video it should be fairly clear. You can also watch this which is the same thing but without the theory. ruclips.net/video/_gRCGIWP8Ys/видео.html There are several other videos on my channel which talk about other parts of the process. This video is specific to fixing the pairing issue when you have the broken boot loader. The following are the symptoms for the pairing issue, Drones power light is white, gimble doesn't move, can't power off with the drones power button.
My Karma died the same way , funny thing is my Yuneec Typhoon H died with the exact same symptoms as the karma shortly afterwards like it had lost its memory , even down to having to pull the battery to shutdown , I wonder if they both use a similar operating system ?
There is a dedicated forum for the Typhoon, it would be worth posting a question there on it to see if others have had the issue and what the fix might be. yuneecpilots.com/
When booting with SD card, Jumping to entry point at 0x81080000. will be displayed and will stop. Please tell me the cause and solution.
Год назад
Could you please specify the 1K resistor that was used in this video? I'm not familiar with electronic components. When I was looking for the 1K resistor, it appeared with wattage. Which one should I pick? the 1K with 1/4W, 1W, or 2W? Thank you for sharing btw. I got this issue and can't fly it for almost 3 years.
My KARMA does have the built in Micro SD Card slot. Is there a difference in the process you use in this video. If so do you have a video that goes through the steps in my variation? Big thanks in advance!
The small resistor that makes contact with the probe is coated with something to make it waterproof, but how do I remove it? (I scraped too much off. Is there a way to melt it?) Also, can all LINUX commands and text be changed using the provided SD image file?
There is a new section on the discord server for putty and USB serial question. There is already some info there but your welcome to ask questions if you have a specific one.
j got an error web trying to boot from sd cart: (don't read boot.scr----wrong image format for fatload---error can t get kernel image)while the card works on another drone....Do you have a good idea of the probleme? thank you very much
I own two aircraft that have stopped flying after updating the firmware on the aircraft (the stabilizer does not work, the power switch LED sometimes blinks and does not stop). I tried booting from the SD card on these two machines, but there was no change at all on one machine. Both machines are in the same condition, but why doesn't one of them even boot into SD? It's quite difficult.
There is a little bit of an art to it, sometimes it takes me a couple of goes as well. Come over to the Discord server so we can provide more information, we also have other videos there and its all free.
@@bozmanx i mean is primordial to change the nand or with the original one can be apply this process? i'm don't have nand programmer, for that is my question, thanks so much for u answer.
@@bozmanx Thanks for answer me, i'm from Argentina and i have a karma to repair, im computer technician with more tha 20 years working in electronics, count with me for anything u need.
Sorry , I dont have a MAC, you would need to look for the equitant products in MAC land. I believe a couple of people have tried to do it. You should go to the Discord server and ask the question there. discord.com/invite/wGVdWPpkua
I booted it from the SD card and got to the point where I was reading the uImage file, but a reading error occurred with the fatload command and it stopped at the u-boot command prompt. Also, I'm concerned that file format information such as FAT is not displayed using the mmcinfo command. It's quite difficult.
yes, I have not seen one it doesnt work on. If it doesnt its normally a driver issue or one of the other well known issues. You can get more on these and or ask questions specific to any problems you have on the discord channel
Hello, I tried the procedure, I have a problem that I don't understand, I can't boot on the SD card, it keeps booting on the nand flash. I took pictures of the assembly just in case to show you. I can also make a video if you want. Thank you and hello from Switzerland. sorry for my English.
If it continually tries to boot from nand then your not triggering the SD card boot. make sure you have 3.3 volts on your probe and that you are connecting to the TP1 test point, it might be worth watching this video ruclips.net/video/05uqpPYnMg8/видео.html
@@bozmanx Hello to you, thank you very much for your response 👍 I was able to boot from the SD card, it's super great. Thank you again for everything, have a nice day 🙏
have a look at this list and find someone close to you, Im happy to do it if your in Australia. facebook.com/groups/1412898679632354/permalink/1413795696209319
Because the OS on the drone has not booted you cant type any commands into putty that is connected to the UART. Once you boot off the SD card there is then a OS loaded and you can run commands.
You should write a step by step procedure for all who have not any idea where to solder e what kind of hardware to buy. I’ll see you post a link where to download the alternative bootloader. After you reboot from alternative booloadr the pairing issur has fixed for evere? Many Thx best greetings
You can build one with these parts I used the following parts, you should be able to use anything with the same spec This is the ribbon cable board, you need to order it with 14 pins with the 0.5 connector de.aliexpress.com/item/1005004411740279.html?spm=a2g0o.productlist.main.11.536e5faa0THgrr&algo_pvid=0494b17c-542b-4461-abc1-55e7a8f9da07&aem_p4p_detail=202312042002111727220837144440005564265&algo_exp_id=0494b17c-542b-4461-abc1-55e7a8f9da07-5&pdp_npi=4%40dis!AUD!1.18!1.06!!!0.77!!%402101fb1517017489308413568ed61f!12000029089942143!sea!AU!127791189!&curPageLogUid=ZWdoBiv1Simr&search_p4p_id=202312042002111727220837144440005564265_6&gatewayAdapt=glo2deu This is the ribbon cable, you need to order 14 pin with the 0.5 connector www.aliexpress.com/item/1005006112575144.html?spm=a2g0o.productlist.main.45.536e5faa0THgrr&algo_pvid=0494b17c-542b-4461-abc1-55e7a8f9da07&aem_p4p_detail=202312042002111727220837144440005564265&algo_exp_id=0494b17c-542b-4461-abc1-55e7a8f9da07-22&pdp_npi=4%40dis!AUD!2.63!2.37!!!12.26!!%402101fb1517017489308413568ed61f!12000035803663611!sea!AU!127791189!&curPageLogUid=t6xyfkL18djj&search_p4p_id=202312042002111727220837144440005564265_23 This is the micro SD slot board (I believe it is SDIO) core-electronics.com.au/adafruit-micro-sd-spi-or-sdio-card-breakout-board-3v-only.html The wiring diagram for it is here cdn.discordapp.com/attachments/1164473450639933450/1187711685880987668/wiring.jpg?ex=65aa56b4&is=6597e1b4&hm=c46a9fbde36f34af9449338a803e03bd96526e07058d0928deab5933bfee0d57&
I repair it for people in Australia but there are others in other countries. there is a list of people here facebook.com/groups/609999613656869/permalink/1033285151328311/?mibextid=oMANbw
Is any one able to explain the process of what needs to be done with the physical SD card? I see the files in the Google drive, but I'm not sure what to do with them. Thanks!
you need to download this image and tool. you then use the tool to burn the image to a miro SD card drive.google.com/drive/folders/1l0vRHL0187gdtYLM0ficCJhaDlT93Fur?usp=sharing
There is someone on the North coast and I am in Sydney. Come over to our facebook page, we have a list there of the people who can help out. facebook.com/groups/1412898679632354
Some already have it, if you dont you can look to solder one on. There is someone working on a board you can build from avalaible parts but its not done yet.
Acércate a nuestro servidor de Discord, hay personas que pueden ayudarte con cualquier problema que tengas. Incluya una captura de pantalla del error que está teniendo. discord.gg/wGVdWPpkua
Come over to the GoPro (broken) Karma Pilots facebook page. There is a list of people there who can help you resolve this issue if you dont have the skills.
Are you able to complete the process in the video? If not is there an electronics repair workshop close by that might be able to carry out the process for you?
Hi , the list is here No one currently in those places but there are people close. facebook.com/groups/1412898679632354/permalink/1413795696209319 If you come to the discord server (invite in the description) there might be a guy there from Sydney who can help you
Where are you located? We now have over 20 people around the world who can fix them for you. There is also a kit available that requires no soldering ruclips.net/video/KdHSphOYSqw/видео.html
With due respect, great job but do you really think 99.9% are all going to do this shit, when as customer you bought a Gp pro product and it's their issue?, they better get me a new one or I'm suing them. With so many people having this issue that's easy when they make millions and ignore the problem, yet on top asking customer to subscribe and on top get a subscription for $55, OMG, let's get into flying to court mode😂
GoPro isnt going to do anything for you to fix this issue, there has already been an attempt at a class action but they were not able to find a lawyer to take it on. We are providing the next best thing, fixing the root cause of the issue. We now have a kit that you can buy that requires no soldering to fix the pairing issue. Its that or throw it in the trash.
come over to our facebook page and drop a post. We have a list of people that can help you in the features section of the page. facebook.com/groups/1412898679632354
Hey I love the video! I just don’t have the time to do this. I am experiencing the same issue and have exhausted every single option between software and contacting go pro and every other video on RUclips in attempts to remedy the issue. Could I send it to you for repairs? I do not care about cost. I desperately just want this thing to fly again.
Hello, I had already given up on this drone, I followed your tutorial and managed to pair it again, congratulations and thank you very much for your help.
Glad you got it flying again.
Great video. I bet the guy in France had his head explode when he saw it. 🤣🤣
Great video and a big thanks to all involved that figured this out. I may have missed it in the video but where does the new boat loader image on the SDCard come from? Can’t wait to try this as we have three Karma drones with this issue. 😊
The boot image and burning tool can be found here
drive.google.com/drive/folders/1l0vRHL0187gdtYLM0ficCJhaDlT93Fur
Boa noite amigão, sou do brasil, tenho noção de solda em eletrônicos, to acompanhando os seus videos para tentar recuperar o meu karma, fiquei com duvida, qual adaptador vc usou para ligar o karma com o computador ?
É apenas um adaptador serial USB para TTL. Se você for ao servidor discord, há exemplos do que as pessoas estão usando.
Well done.
Hello , great video.Can you tell me which jtag adapter do you use?
We dont use a JTAG adapter its a USB to serial device (cp2102 from memory), you can see more about it in this video
ruclips.net/video/05uqpPYnMg8/видео.html
Hello thanks for the educational videos you've been putting out. I've watched this video several times and I'm not understanding the adding of the SD card port. I don't see you ever put a card in there. do you put a card in there? My drone has that Port I noticed that years ago and thought that was a possible software update sd port.
Yes , you need to download this image and the tool, burn it to a micro SD card and insert it into the slot before triggering the SD card boot.
drive.google.com/drive/folders/1l0vRHL0187gdtYLM0ficCJhaDlT93Fur
@@bozmanx thanks for the tip I have watched all of your videos I'm pretty much got to understanding of what's going on. Managed to get one of my karma's up and going without doing any of this the other night. My other one though I am pretty confident it's issue is a software issue. Mine all have SD card slots on them already which is a plus. I just got my resistors yesterday in the mail that's the last of what I needed so I'll be attempting this in the next. Thank you so much for taking the time to share this information a lot of us are very frustrated..
Hi, I have the pairing issue. I see there are many videos of fixes and am confused as to what all is necessary. Is there a recent comprehensive video or written description of what is required? Thank you!
If you watched the full video it should be fairly clear. You can also watch this which is the same thing but without the theory.
ruclips.net/video/_gRCGIWP8Ys/видео.html
There are several other videos on my channel which talk about other parts of the process.
This video is specific to fixing the pairing issue when you have the broken boot loader.
The following are the symptoms for the pairing issue, Drones power light is white, gimble doesn't move, can't power off with the drones power button.
My Karma died the same way , funny thing is my Yuneec Typhoon H died with the exact same symptoms as the karma shortly afterwards like it had lost its memory , even down to having to pull the battery to shutdown , I wonder if they both use a similar operating system ?
There is a dedicated forum for the Typhoon, it would be worth posting a question there on it to see if others have had the issue and what the fix might be. yuneecpilots.com/
When booting with SD card,
Jumping to entry point at 0x81080000.
will be displayed and will stop.
Please tell me the cause and solution.
Could you please specify the 1K resistor that was used in this video? I'm not familiar with electronic components. When I was looking for the 1K resistor, it appeared with wattage. Which one should I pick? the 1K with 1/4W, 1W, or 2W? Thank you for sharing btw. I got this issue and can't fly it for almost 3 years.
I think that any watt rating would be fine.
My KARMA does have the built in Micro SD Card slot. Is there a difference in the process you use in this video. If so do you have a video that goes through the steps in my variation? Big thanks in advance!
The process is still the same you just dont need to solder a SD card slot on to your board or make a board to boot off.
Any ideas on what exactly corrupts the nand and how to prevent it from happening again? Nice video, grand work!
personally it looks like the bootloader is broken at a software level. Hence write a fresh one back it resolves the issue.
The small resistor that makes contact with the probe is coated with something to make it waterproof, but how do I remove it? (I scraped too much off. Is there a way to melt it?)
Also, can all LINUX commands and text be changed using the provided SD image file?
It is called underfill, you should carefully scrape it off until you can see the resistor
got it. thank you.
The knowledge in this video will be very helpful.
Ok for the usb serial… what did you or how did you set it up on the board for the serial adapter??
There is a new section on the discord server for putty and USB serial question. There is already some info there but your welcome to ask questions if you have a specific one.
j got an error web trying to boot from sd cart: (don't read boot.scr----wrong image format for fatload---error can t get kernel image)while the card works on another drone....Do you have a good idea of the probleme? thank you very much
come over to the discord server and post the question, sometimes its because the ribbon cable is too long.
How much do you charge for repair? I have similar issue not pairing. Camera and gimbal not connecting when you turn on the power button.
you can find a list of people who are repairing this issue here
facebook.com/groups/1412898679632354/permalink/1413795696209319
Thanks
I own two aircraft that have stopped flying after updating the firmware on the aircraft (the stabilizer does not work, the power switch LED sometimes blinks and does not stop). I tried booting from the SD card on these two machines, but there was no change at all on one machine. Both machines are in the same condition, but why doesn't one of them even boot into SD? It's quite difficult.
There is a little bit of an art to it, sometimes it takes me a couple of goes as well. Come over to the Discord server so we can provide more information, we also have other videos there and its all free.
Does it work even if I no longer have the stabilizer or the camera?
The fix will work without these parts but you need them installed to be able to fly.
I subscribed to your channel, and the man cave channel sent me.
Hi !! Mike’s man cave sent me directly to here!!!
Amazing! Congrats! Question: is necessary change nand flash to realized this process?Thanks for all u'r work!!
I am yet to need to replace the NAND on a board for this to work.
@@bozmanx i mean is primordial to change the nand or with the original one can be apply this process? i'm don't have nand programmer, for that is my question, thanks so much for u answer.
@@loopdisruptors during this process I do not change the NAND. This is with the original NAND.
@@bozmanx Thanks for answer me, i'm from Argentina and i have a karma to repair, im computer technician with more tha 20 years working in electronics, count with me for anything u need.
@@loopdisruptorshola, pudiste arreglarlo? Saludos
How much do you charge if I sent it to you ?
There is a list of people here (around the world) that repair this issue for you.
facebook.com/groups/1412898679632354/permalink/1413795696209319
Can you make a video of you installing and setting up things on Mac instead? I only have a MacBook Air no Mac pc, any ideas? Thanks
Sorry , I dont have a MAC, you would need to look for the equitant products in MAC land. I believe a couple of people have tried to do it. You should go to the Discord server and ask the question there.
discord.com/invite/wGVdWPpkua
super Video - Grüße aus Deutschland 👋
Mantap, lansung bisa terbang lg gopro karmanya
I booted it from the SD card and got to the point where I was reading the uImage file, but a reading error occurred with the fatload command and it stopped at the u-boot command prompt. Also, I'm concerned that file format information such as FAT is not displayed using the mmcinfo command.
It's quite difficult.
j have +/- the same probleme...
come over to the discord server and post the question there, the invite to Discord is in the description.
Can I use about any USB to serial adapter (cable or board) as long as it has TX, RX and GND?
yes, I have not seen one it doesnt work on. If it doesnt its normally a driver issue or one of the other well known issues. You can get more on these and or ask questions specific to any problems you have on the discord channel
Hello, I tried the procedure, I have a problem that I don't understand, I can't boot on the SD card, it keeps booting on the nand flash. I took pictures of the assembly just in case to show you. I can also make a video if you want. Thank you and hello from Switzerland. sorry for my English.
If it continually tries to boot from nand then your not triggering the SD card boot. make sure you have 3.3 volts on your probe and that you are connecting to the TP1 test point, it might be worth watching this video
ruclips.net/video/05uqpPYnMg8/видео.html
@@bozmanx Hello to you, thank you very much for your response 👍 I was able to boot from the SD card, it's super great. Thank you again for everything, have a nice day 🙏
Great to hear.
Hey that's not a skill I have. What will you charge to fix or where can I send mines
have a look at this list and find someone close to you, Im happy to do it if your in Australia.
facebook.com/groups/1412898679632354/permalink/1413795696209319
Whats the point of teh sd card to the right of the contraption if you only needed the left setup to cknnect direct to pc?
Because the OS on the drone has not booted you cant type any commands into putty that is connected to the UART. Once you boot off the SD card there is then a OS loaded and you can run commands.
You should write a step by step procedure for all who have not any idea where to solder e what kind of hardware to buy. I’ll see you post a link where to download the alternative bootloader. After you reboot from alternative booloadr the pairing issur has fixed for evere? Many Thx best greetings
I did a second video which shows some of that in more detail
ruclips.net/video/_gRCGIWP8Ys/видео.html
You
Are
Awesome!!!!!!!!
Thanks , there are also a lot of awesome, like minded people who have joined us along the way.
Where do you get that right motherboard from? Is it an existing one on the drone? Or online part? Part #..?
there is one in the drone but not all of them have a micro SD card slot on them.
Do you have a closer bigger pic of the sd card slot pins? Just to make sure I understand how the pins are soldered to the board. thanks
You can build one with these parts
I used the following parts, you should be able to use anything with the same spec
This is the ribbon cable board, you need to order it with 14 pins with the 0.5 connector
de.aliexpress.com/item/1005004411740279.html?spm=a2g0o.productlist.main.11.536e5faa0THgrr&algo_pvid=0494b17c-542b-4461-abc1-55e7a8f9da07&aem_p4p_detail=202312042002111727220837144440005564265&algo_exp_id=0494b17c-542b-4461-abc1-55e7a8f9da07-5&pdp_npi=4%40dis!AUD!1.18!1.06!!!0.77!!%402101fb1517017489308413568ed61f!12000029089942143!sea!AU!127791189!&curPageLogUid=ZWdoBiv1Simr&search_p4p_id=202312042002111727220837144440005564265_6&gatewayAdapt=glo2deu
This is the ribbon cable, you need to order 14 pin with the 0.5 connector
www.aliexpress.com/item/1005006112575144.html?spm=a2g0o.productlist.main.45.536e5faa0THgrr&algo_pvid=0494b17c-542b-4461-abc1-55e7a8f9da07&aem_p4p_detail=202312042002111727220837144440005564265&algo_exp_id=0494b17c-542b-4461-abc1-55e7a8f9da07-22&pdp_npi=4%40dis!AUD!2.63!2.37!!!12.26!!%402101fb1517017489308413568ed61f!12000035803663611!sea!AU!127791189!&curPageLogUid=t6xyfkL18djj&search_p4p_id=202312042002111727220837144440005564265_23
This is the micro SD slot board (I believe it is SDIO)
core-electronics.com.au/adafruit-micro-sd-spi-or-sdio-card-breakout-board-3v-only.html
The wiring diagram for it is here
cdn.discordapp.com/attachments/1164473450639933450/1187711685880987668/wiring.jpg?ex=65aa56b4&is=6597e1b4&hm=c46a9fbde36f34af9449338a803e03bd96526e07058d0928deab5933bfee0d57&
Having trouble with the discord link also. just need some parts info. video looks pretty straight forward. appreciate you posting.
The Discord link has been updated to a never expiring one so should be right to go.
Do you do repairs for people if yes how much to get it done Lots of people don't have the knowledge of electronics the way you do
I repair it for people in Australia but there are others in other countries. there is a list of people here
facebook.com/groups/609999613656869/permalink/1033285151328311/?mibextid=oMANbw
Is it possible to get a components list to do this fix?
The best place to look for this is on our discover server
discord.gg/wGVdWPpkua
How much would it be if i sent my karna to you to fix ?
Come over to our facebook page, there is a list of people around the world that can help
facebook.com/groups/1412898679632354/
Is any one able to explain the process of what needs to be done with the physical SD card? I see the files in the Google drive, but I'm not sure what to do with them. Thanks!
Also is there a link to the video he references multiple times in this video?
you need to download this image and tool. you then use the tool to burn the image to a miro SD card
drive.google.com/drive/folders/1l0vRHL0187gdtYLM0ficCJhaDlT93Fur?usp=sharing
Where do we get the command lines from?
sorry for the delay, they are in the description
Great Video - Anyone available in Wollongong or Sydney that can have a crack at this!!
There is someone on the North coast and I am in Sydney. Come over to our facebook page, we have a list there of the people who can help out.
facebook.com/groups/1412898679632354
Where do I get the right motherboard with sd slot
Some already have it, if you dont you can look to solder one on. There is someone working on a board you can build from avalaible parts but its not done yet.
Are you accepting payment to fix the Karma? This is way past my abilities
Check out the list of people we have repairing them and find someone close to you.
facebook.com/groups/1412898679632354/permalink/1413795696209319
Cómo están colegas , me pueden ayudar con el putty no abre
Acércate a nuestro servidor de Discord, hay personas que pueden ayudarte con cualquier problema que tengas. Incluya una captura de pantalla del error que está teniendo.
discord.gg/wGVdWPpkua
Can you fix this for me ....how much
Come over to the GoPro (broken) Karma Pilots facebook page. There is a list of people there who can help you resolve this issue if you dont have the skills.
Can I send my drone to you to get it to pair
There is a list of people here who can fix it for you
facebook.com/groups/1412898679632354/permalink/1413795696209319
sent and subbed from Mikes Man Cave 🙂
i want to fix my drone sir :(
Are you able to complete the process in the video? If not is there an electronics repair workshop close by that might be able to carry out the process for you?
yes sir there are cellphone and computer electricians here .. what should I do?
@@bozmanx
Great Video - Anyone available in Wollongong or Sydney that can have a crack at this??
Hi , the list is here
No one currently in those places but there are people close.
facebook.com/groups/1412898679632354/permalink/1413795696209319
If you come to the discord server (invite in the description) there might be a guy there from Sydney who can help you
Can I ship you my drone. Please
There is a list of people here who can fix it for you
facebook.com/groups/1412898679632354/permalink/1413795696209319
holy shit, im just tossing mine. lol
Where are you located? We now have over 20 people around the world who can fix them for you. There is also a kit available that requires no soldering
ruclips.net/video/KdHSphOYSqw/видео.html
Discord invite invalid :(
I have updated the invite with a non expiring one
@@bozmanx Awesome! Thank you!
come from mikes man cave :) do you repair them yourself and charge a fee?
I have in the past and I am happy to help anyone who needs it.
Anyone from Poland, who can make it? 🫣
There is a list of people who can help here
facebook.com/groups/609999613656869/permalink/1033285151328311/?mibextid=oMANbw
With due respect, great job but do you really think 99.9% are all going to do this shit, when as customer you bought a Gp pro product and it's their issue?, they better get me a new one or I'm suing them. With so many people having this issue that's easy when they make millions and ignore the problem, yet on top asking customer to subscribe and on top get a subscription for $55, OMG, let's get into flying to court mode😂
GoPro isnt going to do anything for you to fix this issue, there has already been an attempt at a class action but they were not able to find a lawyer to take it on. We are providing the next best thing, fixing the root cause of the issue. We now have a kit that you can buy that requires no soldering to fix the pairing issue. Its that or throw it in the trash.
How much do you charge if I sent it to you ?
come over to our facebook page and drop a post. We have a list of people that can help you in the features section of the page.
facebook.com/groups/1412898679632354
Hey I love the video! I just don’t have the time to do this. I am experiencing the same issue and have exhausted every single option between software and contacting go pro and every other video on RUclips in attempts to remedy the issue. Could I send it to you for repairs? I do not care about cost. I desperately just want this thing to fly again.