No it is not. Do not do that. Grid nuetral should be connected to Grid nuetral connection on the Inverter. Inverter load nuetral connection must be connected to your essentials DB. Also nuetral busbars should be separate for Grid, load and aux. Don't mix them
Can you make three phase by using three cheap offgrid inverters and driving them from a phase shifted wave generator (with 120 phase shift between each one)? Could be done quite cheaply it seems?
Thanks Keith, Yes, very good. Nice and clear. However, WHY did you draw 2 x MPPT controllers on your drawing. The Sunsynk Inverter can take 2 x strings and IT does the MPPT controlling ? Did you really just mean 2 x Strings (lines) of solar panels ? Stating the obvious there is no DC-DC conversion going on .... its just DC volts out from the solar panels into your Inverter. Or have I missed something ? Thanks again Keith
I'm planning on connecting a sun2000g3 micro inverter to the generator input. How would grounding work during island mode as I asume the microinverter will continue generating, while the other mppts turn off, (sunsynk 3.6kwh UK) will earth neutral bonding be safe
Yeees! The best football team in the world, I agree 100%! Well in!
Is it ok to connect inverter output neutral with grid neutral?
No it is not. Do not do that. Grid nuetral should be connected to Grid nuetral connection on the Inverter. Inverter load nuetral connection must be connected to your essentials DB. Also nuetral busbars should be separate for Grid, load and aux. Don't mix them
Hi is it ok to connect a solar array with enphase inverters to the sun sync hybrid inverter.tku.
Can you make three phase by using three cheap offgrid inverters and driving them from a phase shifted wave generator (with 120 phase shift between each one)? Could be done quite cheaply it seems?
Thanks Keith, Yes, very good. Nice and clear. However, WHY did you draw 2 x MPPT controllers on your drawing. The Sunsynk Inverter can take 2 x strings and IT does the MPPT controlling ? Did you really just mean 2 x Strings (lines) of solar panels ? Stating the obvious there is no DC-DC conversion going on .... its just DC volts out from the solar panels into your Inverter. Or have I missed something ? Thanks again Keith
I'm planning on connecting a sun2000g3 micro inverter to the generator input. How would grounding work during island mode as I asume the microinverter will continue generating, while the other mppts turn off, (sunsynk 3.6kwh UK) will earth neutral bonding be safe
Are you saying you don’t need the gateway like you would with Tesla Battery, all will be safe?
Redshite 😂
7-0
Do you know where analfield is