Check description for list of products and operations. Enter the giveaway here: tanks.ly/2TkCYaL Rules to join at the end of the video! If you like what I do consider supporting me so I can keep on making. Join as channel member or check my Patreon for early access and voice-over edit of my videos. Thank you!
Wow! You made a knife out of essentially cast iron(I see why you used a core of 1070 in it), it looks great and you showed how. To that I say 'tank you good sir'.
That's exactly what they were! If you look at the samples of that time, they were a little rough, often with blackened blades, simple knives whose production could easily be established in a warring country. He was equally good at cutting food and sentries. Thanks, among other things, to such knives, our great-grandfathers crushed the Nazis! Thank you for the video, wonderful knife!
По учебнику при снятие часового нужно держать лезвием вверх и наносить удар снизу-вверх. Перерезать горло часовому тоже удобно. Для этого у этого ножа обратная гарда. Есть учебный материал по этому ножу времен Великой отечественной войны.
Здорово! Но на рукоять лучше использовать карельскую берёзу, или кожу, так было бы ближе к правде. А ещё советские бойцы часто модернизировали свои ножи НР-40, делая наборные рукояти из плексигласа.
That knife is awesome, but I'm concerned about it's structural integrity, considering how close to the edge the pin hole is, how there's only a single pin, and how short and thin the tang is. Still, looks great, and seems to cut well.
I really like these unique items which you make, and the way you take something, sometimes with relevance to the end product, and re-purpose it. Like turning a piece of tank track into a knife.
Very nice work! I jus think if the guard not supposed to be rotate 180 °, the lower part oriented to de pomel, and the upper part oriented to the tip of the blade.
It would be interesting to see the strength test. As the knife leaves scratches on the glass. Cutting the rope. Rossection of plastic bottles with water.
![Forging A Puukko : San Mai Damascus Blade [Start To Finish]](/img/1.gif)
Check description for list of products and operations.
Enter the giveaway here: tanks.ly/2TkCYaL
Rules to join at the end of the video!
If you like what I do consider supporting me so I can keep on making. Join as channel member or check my Patreon for early access and voice-over edit of my videos.
Thank you!
Black Beard this is awsome again Thank you
Buen trabajo.saludos desde sevilla,españa
Ciao sei un grande!!!
Очень круто!
Black Beard Projects r u italian?
As a collector of WW2 memorabilia and relics, I cried a bit when you started sawing the track...
Same man, same...
Every tank guy can relate
Anybody else watch these before going to bed? Love your content!
LOL I do
SAME!!
Wow. Seems to be a before bed thing XD
Me
Yeah, me right now
Who else automatically shuts theirs eyes when he is welding the pieces together in the vice?
Once I didn't do it and I had serious eye burns that night, couldn't sleep. After that I always shut them!
Yusuf Sinan Akgul Welding flash is the worst!
@@proudpict2057 In Ukraine we call it "catch the rabbit"))
Forced habit
Super Damasco !
lol, these trucks are usually bought for the restoration of tanks :D
I got tired just watching you swing that hammer but the hamon and finish on that blade is just outstanding. Great work!!!
That's a really nice knife mate I love laminated knives using this method
Wow! You made a knife out of essentially cast iron(I see why you used a core of 1070 in it), it looks great and you showed how. To that I say 'tank you good sir'.
That's exactly what they were! If you look at the samples of that time, they were a little rough, often with blackened blades, simple knives whose production could easily be established in a warring country. He was equally good at cutting food and sentries. Thanks, among other things, to such knives, our great-grandfathers crushed the Nazis! Thank you for the video, wonderful knife!
Awesome!!!
Great work! I love making things from other things!! Well done!!
That knife sharpening jig is rad!
Good af
BRUUHHH WE NEED MORE VIDEOS LIKE THIS !
saudações do Brasil a todos. verei essa maravilha mais tarde. tudo de bom a todos. sucesso.
@Alan Moreira. saudações. pois. da hora mesmo. um bom domingo e uma semana melhor ainda. sucesso na vida.
That handle looks amazing.
Great idea making it out of tank treads!
Respect from Egypt man
Awesome!!
Никогда бы не подумал что из гусеницы можно сделать нож
А из ножа трак слабо?)
@@романроманыч-э7н хпхахахаха я представил этот процесс
Beautiful knife!
Very nice, but I think your guard is upside down?
Looks to me you are going to hurt your hand when stabbing something...
All in all: well done...!
Ed.
Most soviet combat knives were actually made that way, but good observation
Looks like most NR-40 knives have the guard this way around!
That’s how lots of russian knives are.
По учебнику при снятие часового нужно держать лезвием вверх и наносить удар снизу-вверх. Перерезать горло часовому тоже удобно. Для этого у этого ножа обратная гарда. Есть учебный материал по этому ножу времен Великой отечественной войны.
This knife is first of all a killing device, In this case guard is installed correctly
Saludos de Argentina, Exelente trabajo !!!!!!!!!! Felicitaciones !!!!!!!!!!
Miticoooooo!!! This prosecco is for you. Cheers from Milan🇮🇹
Awesome knife that was made from a tank track.
Simple and awesome at the same time.
Good work as usual without dust
Browsing through my feed: turned woodbowl with resin inlay, wooden coat hanger, forged knife from tank tracks... FORGED KNIFE FROM TANK TRACK?!
Ahah!!
Apart from the guard being upside down, good work!
Wow, speechless
that is an awesome knife you did an amazing job on it
Killer knife! I really like the tracks and incorporating them into the blade.
Beautiful job
Кругом сплошные танкисты )
Best ASMR ever
Forging cool knives AND recycling?? Double kudos to you, Sir
Excelente bayoneta, felicitaciones, saludos desde Nicaragua
That is such a cool idea!
Good to see you back up n running. 👍😁
keep doing what are you doing its AMAZING BBP
That one looks truly amazing
Wonderful work! Nice video!
Bravissimo
I just went on e bay, and you can actually buy WW2 tank trcks. I'm amazed.
That was a joy to watch!! 👍👍
Молодец, борода !
Здорово! Но на рукоять лучше использовать карельскую берёзу, или кожу, так было бы ближе к правде. А ещё советские бойцы часто модернизировали свои ножи НР-40, делая наборные рукояти из плексигласа.
*Wow. Very nice knife*
2:36 that steel looks very hard maybe it's like 1095 or higher
I like the hamon very nice
Great work 👍
Enjoyed and gave a Thumbs Up also
Very very cool video. I have bee following you for some time and of all your builds repairs etc, this has to be the coolest.
You great man!
That came out real nice 👍
You are REALLY Crazy ... 👏👏👏👏💪🏆
Nice job...looks awesome!
make a stand for your magnet that guarantees your angle. That would be a great video. Thanks Man
Nice job knife maker.
Great project, looks great!
That knife is awesome, but I'm concerned about it's structural integrity, considering how close to the edge the pin hole is, how there's only a single pin, and how short and thin the tang is. Still, looks great, and seems to cut well.
Eres un genio 👏👏👏👏👏👏
Hmmmmm🤔 4:10 your welding magnet also has a Black Beard 😂
В траках не та сталь, а вот в пальцах, которые их соединяют - вполне себе неплохая.
одно слово неруси
I got one of those sharpeners coming, I can't wait.
Can you tell me the name of this device?
Damn cool.
Nice black knife. It reminds me of a Mora knife from the 80's esp wrt. the handle construction though.
nice work
Very good idea bro 👍👍👍👍👍
Beautiful job as usual, tanks! :)
Great job!
I really like these unique items which you make, and the way you take something, sometimes with relevance to the end product, and re-purpose it. Like turning a piece of tank track into a knife.
I really want to know what is that White poudre ??
Flux (usually Borax). Used to clean the oxydes and have a good forge weld.
@@MrF4eable thank you mate
Nice job
Mi Mancavano i video di forgiatura.
I missed the forging videos.
❤
Very nice work!
I jus think if the guard not supposed to be rotate 180 °, the lower part oriented to de pomel, and the upper part oriented to the tip of the blade.
Нож разведчика, классно выглядит.
It would be interesting to see the strength test. As the knife leaves scratches on the glass. Cutting the rope. Rossection of plastic bottles with water.
Blackbeard is very difficult to beat, and maybe impossible!
Amazing!
7:17-7:19 it looked like delamination happened. How did you ensure that the sandwich was well fluxed and forge-welded?
you make tank lovers crying
Just talented... Best in the world
Я с России, в моем городе во время WV2 собирали эти ножи и до сих пор делают.
Город Златоуст
Everything looks amazing but you hole in the tang is off set and is probably going to be a point of failure. I love how the knife turned out overall.
This is "cherry"-soviet scout knife.
👍
good job comrade!
Nice mate.
VERY NICE!!
Video starts at 0:56 for anyone wondering.
Good job !!
Nice, that Tomato stood no chance.
Aus den Bolzen zwischen den Kettengliexern kann man auch sehr hochwertige Klingen machen.
14:04 what is the brand of the sharpening system do you use
MadEdge
What is the name of that magnetic object you use triangle shaped? Where is it available to buy?
Really nice work, as always. My favorite kind of blade ! I have the same camo t-shirt from Solognac btw 😋
Hands up 🐾 łapki 🐾 Good Work. Beautyfull movie. Beautyfull Passion. Regards from Poland
Nice job fantastic hands to make a great work. Cheers
the best