Big question: does the ddr/dds have the same drop height of the glassdrop? I usually use forks and ttx, I got a used ddr and paired to a 20° poppy, but... the rear axle position is very different vs a ttx, it's leveled with the platofrm board, while forks and ttx place the axle 2cm below the platform
@@ldptaiwan thank you for reaching out and retreiving the correct drop height! With my front Hydra I can go a little lower then the standard 7,5mm spacers of the sdf fork, but obviously not something like 2cm :)
I have majorarc trucks. Requires abit of tweaking for a pump setup. Chill pumps only, you won't be getting any speed there. I'm testing them on a top mount now.
I have the major arcs too. They are super low, super easy to pump at lower speeds and they have the closest feel to snowboarding for me. But for ldp, they "top out" quite soon at a not that exciting top speed, even with harder bushings. They also work only at 0 wedging, so perfect for drop though boards; for ldp platform setup you can use dds/r/glassdrops set at zero or, if you find them, flat forks. But then a board like Pantheon pranayama/ember/quest/nexus or Zenith ab 3.0 are cheaper and do the same job
Thank you very much for your video ! I started pumping with an Antidote Cyclone but my deck is too high (risers to have good angle…). I’m looking for a set lower. Your video is perfect for that :) Can’t wait the next one that gonna show great combos trucks/brackets :) Cheers from France ;)
Best review I have seen comparing many brackets available for skating and pumping. Keep up the awesome work!
很有內容的影片!讚!
This explained everything. Thank you so much!
super useful!
Well explained!
Loved this video thanks for posting
thanks!
Great video! Thank you! :)
Thank you for this excellent video! Very informative.
Way better description than on E gbomb. I didn’t know about rear angle differences.
請問用Gbomb是否很易pumping?
看了你的視頻學習到了很多
超級詳細!
Very informative video! The cycling track looks very smooth. Could you share some of your favourite routes in future videos?
非常好的一個介紹.
請恕我再補充一些, 關於後輪架的一些觀察
我用的是Antidote Hurricane, SDF, 43 Poppys, Delirium. 我也嘗試了Insania.
如果單單只說0度輪架, 經濟允許的話, 花多一點, Insania的感覺比Delirium好很多. 比較有反應和靈活度比較高. Delirium 完全是死的, 穩定度不錯, 可是真的好像在定點移動.
How do the various G-Bomb brackets work with non-precision RKP, like Paris V3 150?
@@ldptaiwan thanks that’s good to know
What's the name of those 4 small white bushings you put between the board and the baseplate, at 14:41? Where can I buy them?
Those are hard plastic riser from Gbomb, they came with SDF www.gbomblongboards.com/product-page/sdf
Thank you!
Big question: does the ddr/dds have the same drop height of the glassdrop?
I usually use forks and ttx, I got a used ddr and paired to a 20° poppy, but... the rear axle position is very different vs a ttx, it's leveled with the platofrm board, while forks and ttx place the axle 2cm below the platform
@@ldptaiwan thank you for reaching out and retreiving the correct drop height! With my front Hydra I can go a little lower then the standard 7,5mm spacers of the sdf fork, but obviously not something like 2cm :)
Very informative! Thanks and Looking forward to more reviews on LDP.
For example have u tried the major arc trucks?
I have majorarc trucks. Requires abit of tweaking for a pump setup. Chill pumps only, you won't be getting any speed there.
I'm testing them on a top mount now.
I have the major arcs too. They are super low, super easy to pump at lower speeds and they have the closest feel to snowboarding for me.
But for ldp, they "top out" quite soon at a not that exciting top speed, even with harder bushings. They also work only at 0 wedging, so perfect for drop though boards; for ldp platform setup you can use dds/r/glassdrops set at zero or, if you find them, flat forks. But then a board like Pantheon pranayama/ember/quest/nexus or Zenith ab 3.0 are cheaper and do the same job
Thank you very much for your video !
I started pumping with an Antidote Cyclone but my deck is too high (risers to have good angle…). I’m looking for a set lower. Your video is perfect for that :)
Can’t wait the next one that gonna show great combos trucks/brackets :)
Cheers from France ;)
@@ldptaiwan surfrodz 139mm in front. But I also had wheelbite problem :P
I’ll check models you point at me. Thanks !
💘 𝖕𝖗𝖔𝖒𝖔𝖘𝖒