I’m building this now. I also got the big Ed photo etch markup kit for it, and it makes the weapons bays a lot more detailed. I also go out of order, since I loathe building the weapons and gear I do them first to force me to give more effort. Great job replicating the Have Glass paint scheme. I hope mine turns out as well as yours did
Looks INCREDIBLE!!! I wish I could airbrush as well as you. I've got a fairly good one, mid level. It's clean, I've tried all different pressures down to 13psi and I just can't get the paint to come out nicely. It either starts to.. have circles if it's too thick, or if I change amount if thinners or pressure it ends up sort of rough when dry 😔
I see, well ammo are water based acrylics, so they a bit tricky to work with. First of all set up your compressor for 20-25 psi, they need a bit more pressure do spraying properly. They a bit different from Vallejo, so better to use there own Ammo acrylic thinner. Some also like to use isopropyl alcohol, but I’m not a fan. Thin it around 30%. Also mix paint in separate jar/plate and than poor into your airbrush. Spray it in very very thin layer and dry each one, you can dry it by blowing it with air from airbrush. Build it up slowly and you will get very nice matt layer of paint. Also very important to clean model before painting with alcohol or soapy water. And to use good primer. I use mister surfacer but one shot from ammo also great fro acrylic;) and remember it’s only hard for like 15 years, that’s it easy pizy (just joking )
Честно не собирал от Академи, но литник выглядят очень похоже. У Хасегава вышел отличный набор хоть и не без стандартных для Хасегава минусов в виде следов от толкателя в неудобных местах
Congratulations on your skill...beautiful kits. If possible make a video explaining the realistic painting of a Nimtz class aircraft carrier flight deck . Thank you.
Hi, sorry for late response. Yeah well here I used AK Real Colors Agressor Grey and F-15 Dark Grey, basic colors of Mod Eagle scheme. I also add a bit of metallic Alclad color just to add metallic shine to them. Not too much, around 10%. As metallic base you can use any durable metallic color, Xtream Metal fro AK for example.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I’m building this now. I also got the big Ed photo etch markup kit for it, and it makes the weapons bays a lot more detailed. I also go out of order, since I loathe building the weapons and gear I do them first to force me to give more effort. Great job replicating the Have Glass paint scheme. I hope mine turns out as well as yours did
Thank you! And good luck with your raptor;)
I was just recommended to this channel, and I am not disappointed! Your modeling skills are amazing and inspiring!
Thank you! I'm happy you liked it ^^
An interesting technique of painting the model, the process itself looks easy, and the comments do not contain unnecessary information. Great job.
Glad that you liked it, thank you!
I think it’s awesome how you added a metallic shade to the primary colors. Look great!
Thank you!
Fantastic built
Thank you^^
Fantastic work.!.👍
That looks nice! I try to find solution to how get that metallic look on the paint before varnish on my 1:72 f22 model
Looks amazing! I've been looking for a good method of recreating the paint scheme and yours is the best i've seen! thanks for the guide!
Thank you! I'm not the original author of this technique, but I'm glad it could help you ^^
Just realised thi sis the same kit i have too, so definitley helpful! Time to watch your other videos!
You are welcome:) soon I'll release new one
Wauw great job looking good 👌🔥💣🔥
Thank you!
Всё ещё завораживает) спасибо, что шесть минут)))
Рад стараться:)
Nice work, subscribed 👍
Thank you and welcome!
Nailed it mate 😉👍
Thanks 😊
Looks INCREDIBLE!!!
I wish I could airbrush as well as you. I've got a fairly good one, mid level. It's clean, I've tried all different pressures down to 13psi and I just can't get the paint to come out nicely. It either starts to.. have circles if it's too thick, or if I change amount if thinners or pressure it ends up sort of rough when dry 😔
Thank you!
Don’t worry at first airbrushing looks complex, but with practice it will be more and more fun. Can I ask what paints do you use?
@Scalecat Sure 😊 I use mig ammo acryllic mostly, thinned with vallejo airbrush thinner
I see, well ammo are water based acrylics, so they a bit tricky to work with. First of all set up your compressor for 20-25 psi, they need a bit more pressure do spraying properly. They a bit different from Vallejo, so better to use there own Ammo acrylic thinner. Some also like to use isopropyl alcohol, but I’m not a fan. Thin it around 30%. Also mix paint in separate jar/plate and than poor into your airbrush. Spray it in very very thin layer and dry each one, you can dry it by blowing it with air from airbrush. Build it up slowly and you will get very nice matt layer of paint. Also very important to clean model before painting with alcohol or soapy water. And to use good primer. I use mister surfacer but one shot from ammo also great fro acrylic;) and remember it’s only hard for like 15 years, that’s it easy pizy (just joking )
@Scalecat 😅😅 Brilliant! Thanks brother 🙏🏼
Also can recommend to buy isopropyl alcohol and airbrush cleaner to clean it properly after each use :)
Hey scalecat when is your next model
Glad that you asked! I just finished my new project, soon pics gonna be upload on my social networks, and I’m starting to work on video ^^
Данный набор лучше/хуже академии или хасегавы, как считаете?
Честно не собирал от Академи, но литник выглядят очень похоже. У Хасегава вышел отличный набор хоть и не без стандартных для Хасегава минусов в виде следов от толкателя в неудобных местах
Congratulations on your skill...beautiful kits.
If possible make a video explaining the realistic painting of a Nimtz class aircraft carrier flight deck .
Thank you.
Thank you! Hmm I’m actually thinking of doing some base for my aircraft models once day
What paint did you use?? Thank you!
Is the masking very time consuming
Depends, in some cases this is a matter of minutes, other - hours
can u list the paints that u used?
I really like it! thx!
Hi, sorry for late response. Yeah well here I used AK Real Colors Agressor Grey and F-15 Dark Grey, basic colors of Mod Eagle scheme. I also add a bit of metallic Alclad color just to add metallic shine to them. Not too much, around 10%. As metallic base you can use any durable metallic color, Xtream Metal fro AK for example.
Thx!
Nailed it! ❤️
Yep, nailed it 👍🏻👌🏻
Thanks! ^^
What airbrush brand did you use?
Fengda
Good
I use a 1-144 model