Something a lot of people do wrong with powder coated frames is not grinding off the powder coat where bolts touch.. the power coat will cause bolts to come loose, just going the powder coat off only where the bolt/nut makes contact
i have a 2018 yz 125 and i left the silencer plug in and it was bogging really bad then it wouldnt start so i was going to do a re build then i noticed the plug was in lol
Connor Norton well only if the float is stuck down, if its stuck up the needle valve wont open because the float doesn’t get pushed down, therefore the carb bowl wont fill up with fuel which equals starvation and the bike wont start
I have a yz250f 2008 it will let me bump start it but won’t kick start. PS(my kick start is not broke🙄 it has enough compression. I brought the bike and owner ain’t driven it in 4 years. And SUGGESTIONS or ANSWERS ? Can the carb be dirt and the jets plug up? 🤔🤔🤔
0:38 that's what she said
Your blinker fluid leaked into your brake pads cauzing you to run out of gas😂😂😂😂😂
i thought it was the powerband fluid.lol
4:20 I would run the stock silencer with the Works Pipe, looks and sounds better than the shorty.
Wouldn't start because throttle cable had too much slack. Not enough air through the slide.
Something a lot of people do wrong with powder coated frames is not grinding off the powder coat where bolts touch.. the power coat will cause bolts to come loose, just going the powder coat off only where the bolt/nut makes contact
The air box cover/plastic cap when you wash bikes to keep from water getting in engine was still on.
jackson shellhaas if that was the first couple of kicks would have sucked it though the intake
Tahj Clayton no those things bolt on
jackson shellhaas I gotcha didn't kno you talking about the actual assymbly for the air box
No gas
I don’t know weather I should get a four stroke or two as my next bike
4
Toxic Sniper 2 stroke
4
4 stroke there cheaper
Toxic Sniper Same like I got Kx 2018 bike and yz
HAHAHA 100% you left your but plug in 😂
Exhaust plug was in
It would shoot the plug out
Jay Dalton BMX hi jay
Hyello
Jay, you dirt bike?
Yessir
how did you guys keep the dirt from dismantling on the jumps, whenever I make something like that, my bike rips the whole jump and i have to restart.
Black Rose water
Faiz Akhtar you need to let the jump sit for like a week
Always enjoy your vids. Do you have a vid on comparing the 125 vs 250? And personal preference? Thanks
125
@@noble5623 thanks….comment was made 3 years ago. 😂
Airbox wash cap was on
No it would not run it has happened to my friends bike it did not start
Cody Bailey the whole thing was to figure out why it wouldnt start
My favorite channel from trails riding thank you tyler
What do you like riding more your 125 or 250
The kill switch was off
Please keep riding the kx125
And instead of getting a klx110l again get a 65 Yamaha or Kawasaki and do a big build on one and then keep it
Liam R I agree awesome idea
No a Honda CR85
There was no gas in the bike
You had a filter cover for washing on the airbox?
Hey just a concern i had if you sand the finish off aluminum it will corrode i dont know if you know this but figured id say it anyway
His carb needed cleaned
Carb needed cleaning
REASON: you forgot to *turn it off and back on again*
Did you leave you air filter cap on when you cleaned your bike last so it was restricting the air ?
The exhaust plug was still in it lol
Or exhaust plug was in
Clogged carb jets
Dirt bike Productions he has a lectron
was the fuel intake to the carbi blocked??
its the fuel mixture, I had the same problem with my KX85
Air box boot wasn't sealing
Spark plug
What bike do you recommend for a 13 year old that has never ridden before ?
Ttr125
Klx 140
How tall are you and how much do you weigh that's what matters
An 85 cc 2 stroke or like a ttr-125 how tall are you
Kill switch wire
the bottom end crank bearings are going . exact same noise happened with my rm and it locked up
The piston went though the gas tank
You didn’t turn the on switch, on🤔
The wash plug was in the muffler.
Black Rose ur right
Black Rose your right
U left the silencer plug in
It had no gas
u beat me to it
i have a 2018 yz 125 and i left the silencer plug in and it was bogging really bad then it wouldnt start so i was going to do a re build then i noticed the plug was in lol
When are you going to fix the clutch cover?
Did u have to drain the gas out of the carb ?
Out of gas
Bad spark plug
You need to switch gears once an awhile
lmaooooo
Same thing happened to me w the motor mounts and apparently its normal so before i ride i just make sure every bolt i see is tight
My dirt bike did that to and one of my mother mounts were loose also
This poor bike sounds like he’s in 1st gear the hole time....
power band
or rev limiter lol
Tyler instead of buying a damn little kids 110 maybe build an 85 or kx100 or rm100 something like that like this so Tyler can see!
69MASTER420 do you have a 100?
69MASTER420 Lol a rm100
Zizzery yea they used to make them look it up
Zizzery I loved mine it’s my profile pic too lol
That carb float was stuck wasnt it
Connor Norton well only if the float is stuck down, if its stuck up the needle valve wont open because the float doesn’t get pushed down, therefore the carb bowl wont fill up with fuel which equals starvation and the bike wont start
Jack Robberson I agree with you, float was stuck. I was gonna write that until I saw your comment
Fuel filter was blocked or the breather hose on the fuel cap was blocked
When you are wrenching on bikes make sure you turn you ratchets to the off position so they don't wear out.
You had the plug in the exhaust
Fuel line wasn’t connected
CDI wires were loose or not plugged in
The carburetor Was filthy
Lmao did you leave the wash air filter cover in it or was there gas in the tank or was the throttle not hooked up
did you even turn the bike on? like the key
The air filter was dirty or the spark plug was bad
The air filter cover for washing was on it
The Carburetor was dirty or messed up
I think it didn’t start because the air filter was no getting enough air through to mix with the gas or the carburetor was junked in
I had that happen to me I. The middle of a race on my 85 I thought the same thing was happening
Was the choke off??
Solenoid happened to me not letting enough power through
Carbs were dirty or not tuned
I have a yz250f 2008 it will let me bump start it but won’t kick start. PS(my kick start is not broke🙄 it has enough compression. I brought the bike and owner ain’t driven it in 4 years. And SUGGESTIONS or ANSWERS ? Can the carb be dirt and the jets plug up? 🤔🤔🤔
The lectron carb wasn’t Adjusted right
The carb jet was stuck???
Exhaust plug in?
Gasket in the crank case was letting oil from the crank case go into the cylinder and putting tons of carbon onto the plug, instantly fouling it
Was it the kill switch grounding out?
Exhaust plug for sure
My best friends forever😀😁👋👍
New coil or check the jets in the carb
Take the 125 trail riding it’s a lot of fun with a race bike
Was the kill switch locked in ??
you had the exhaust plug in from washing it
Sounds good 😏😏
U need to move the exhaust from touching the plastic it will melt it and rub it and make a mark
Gotta say I'm pretty disappointed you changed from susuki to Kawasaki that's just sad man
Why does his kx sound so damn goooodddd
The carb need cleaning or the motor was to cold
Was the bike flooded
All bikes have a vibration noise from either the top and or bottom end
Was the spark plug bad
Had no gas 😂
Was it the jet in the carburetor
Exhaust plug was in or the choke was not on
Petrol wasn't getting to the carb
Are you from south Africa
The kill switch hahaha
I put closed captions on and it thought the KX 125 Was music
The choke was off or the spark plug was not in all the way
Foud the spark plug maybe,i did it on my yz250 its a easy fix
Carb. Issues???
carbon buildup in top end or the exhuast was clogged bye it?
Had no gas
No air filter or exhaust plug was still on
Plug was in or spark plug or in gear
Boy had no gas in it
youre start button wasnt on
You didn’t have it in neutral??
Had the wash cover in the filter