I see a lot of compliments and a lot of complaints, but not constructive criticism. Here I attempt to offer some. The seam and batten method can make a strong boat, if the joinery is good and the design transfers loads well. Four simple changes to strengthen this boat. Fair the planks to lie flat to the stem, bed them in asphalt. To improve the joint at the keel, cut the middle bottom planks at an angle, then fit finely with a plane. Use long timbers or scarf the planks and battens, and lay them in long arcs. When the planks or battens must be assembled from shorter pieces, stagger the joints fore and aft so that nowhere is one joint in line with the next joint above it. Run a timber fore and aft along the inside of the top of each frame. For less drag and easier paddling, paint the outside with exterior latex primer and cover this with several coats of exterior exterior acrylic-latex paint rather than asphalt.
A lot of negative talk about this guys boat . I've built boats all my life wood and fiberglass. And I think you bunch of haters should keep your comments to yourself at least he's trying and it's probably his first boat .I'd be willing to bet that you negative people couldn't even come close to building a boat 🛥 so please give the guy some credit.
first thing, I think he did a great job. I'm always watching videos of people building the same thing in different ways so I can understand the basics. Second thing, What is the problem with idiots saying stupid things? we are adults, and mom told us when we were kids to don't listen to idiots.
itu cukup bagus saudaraku, bayangkan jika beliau tinggal di tepi sungai di kampung, pasti beliau bisa hidup , memancing ,menjaring ikan , tanpa perlu meminta minta, jika di tambah dengan mesin yg kecil saja ,sudah bagus , seperti mesin rumput sudah cukup, tahniah dengan bakatnya,
Canvas impregnated with asphalt laminated on today asphalt painted on the hole would make it incredibly strong. I’ve seen ocean going boats with nothing but canvas and asphalt
You are a great woodworker and I applaud your boat build! What are you going to name her? Make your next one bigger, and try to use a steamer to steam the long pieces of wood so you can use one piece and bend it, making it monolithic from front to back. Keeping the planking and d structural monolithic, at least from front to back will increase the strength overall of your craft. Best of luck and smooth sailing friend! 🙏💪👍
Hi. You did really good job on that small boat .but you know the screws will get rusty with time on water even you painted it with that black oil water resistant. I'm not spécialist on boats but I have some skills and I think that it will damage the wood with time. Anyway it's just my opinion. Thanks 👍
I grew up shrimping on 50’ Biloxi Lugger. Been around boat yards all my life. This guy is talented! Have some respect. Keep your mouth shut if you can’t say something nice. Or post a video of you trying to build a canoe. Probably don’t own a saw.
Okay this boat was built in a few hours. It's built with cost effectiveness in mind. It's also probably sold for cheap. As long as it works. I am pretty sure these guys can build what ever you think is the special way to build it. Like lots of youtubers do. They take long time. Obviously cost more. Probably the economic situation of the customer doesn't allow it.
You did a very excellent job it looks very good and the voice seem to be having a good time but you were very talented in carpenter I’ll keep watching you God bless
Jangan koment yg tidak baik...brow... nyatanya bisa mengapung... itu kalo di desa saya namanya sampan / prahu kecil untu sarana antar rumah...bila sebagian besar desa itu biasa terkenang air.... biasanya dikayuh ibu ibu..apa untuk belanja... cuma di sekitaran desa tersebut.... tidak untuk mengarungi laut.... mengerti...brow...?
There is no way that I would ever buy a boat from him he has all the planking joints on one station also he didn't know how to wrap his buttons around the bulkheads crazy.
All I saw was a guy pole the boat around a shallow pond. There were no oars or oarlocks. The boy with the double-end paddle was not using it, possibly because the boat was too heavy to paddle. Anyway, sitting on the deck is too high and unstable, and sitting on the floor is too low and wet -- seats about midway in height would be about right. The tar will likely be a mess in the sun. Need a line on the bow (called a painter) to help dock and secure the boat. However, you put in a lot of effort and material and you know your carpentry, so I wish you well. Just stay away from deep water. 😊
And you couldn't say anything positive? I think he's design for where he wants to use it is perfect, particularly when you allow for the costs. He did not make it to sail across Pacific.
Why do all of his joints end at the same spot? Seems like it’s an inherent weak spot. They should be staggered. Am I wrong? I’m not a hater I just know a little bit about building things.
I see a lot of compliments and a lot of complaints, but not constructive criticism. Here I attempt to offer some. The seam and batten method can make a strong boat, if the joinery is good and the design transfers loads well. Four simple changes to strengthen this boat. Fair the planks to lie flat to the stem, bed them in asphalt. To improve the joint at the keel, cut the middle bottom planks at an angle, then fit finely with a plane. Use long timbers or scarf the planks and battens, and lay them in long arcs. When the planks or battens must be assembled from shorter pieces, stagger the joints fore and aft so that nowhere is one joint in line with the next joint above it. Run a timber fore and aft along the inside of the top of each frame. For less drag and easier paddling, paint the outside with exterior latex primer and cover this with several coats of exterior exterior acrylic-latex paint rather than asphalt.
)-😅❤
19:46 😊😊😊
I bet that gives them hours of fun and is what they can afford. Bon voyage!
I was hoping to see a craftsman at work, I hope that’s just for display outside a pub or something 🫣
He is a professional CARPENTER.
Ellerinize sağlık, harika.👍👍👍
A lot of negative talk about this guys boat . I've built boats all my life wood and fiberglass. And I think you bunch of haters should keep your comments to yourself at least he's trying and it's probably his first boat .I'd be willing to bet that you negative people couldn't even come close to building a boat 🛥 so please give the guy some credit.
Couldn't of said it better myself brother.
I like it but I think it's more like a box than a boat. It will work and the winner is who catch more fish! :)
Maybe it is a Boax..?
Good reply and hit the nail on the head. 👍🇦🇺
first thing, I think he did a great job. I'm always watching videos of people building the same thing in different ways so I can understand the basics. Second thing, What is the problem with idiots saying stupid things? we are adults, and mom told us when we were kids to don't listen to idiots.
What l like about this, is that with minimal tools and cheaper materials, you can still build a serviceable boat.
Those top professional craftsmen designed and built a boat by applying the very basic principles , which almost all people they don’t know. Thanks
I think that should read "which like almost all people they don't know.Thanks"
itu cukup bagus saudaraku, bayangkan jika beliau tinggal di tepi sungai di kampung, pasti beliau bisa hidup , memancing ,menjaring ikan , tanpa perlu meminta minta, jika di tambah dengan mesin yg kecil saja ,sudah bagus , seperti mesin rumput sudah cukup, tahniah dengan bakatnya,
Pekerjaan pembuatan perahu kayunya cukup spel teman itu bisa menambah pengetahuan saya,, trimakasih sahabatku❤❤❤
Well done Sir. You have shown Beautiful craftsmanship.
When cabinet makers build boats.
Fabuloso
Your next boat has to be better.
Well done very nice work
It floats. Nothing more.
Hey bro I like your shop especially your band saw. Don't pay any attention to the haters.
And I love the 60's and 70 's sounding music in the send off. He'll yeah
watching in case i get stuck in an island and there's no way out but by making a boat
I have watched many of boat building techniques. This is the best and simplest way, and the joint technique applies the best physics rules.
She flaots😊, good attempt
Nice idea in making boat.
You go captain! Good job
Broke all the rules , and still pulled it off 🎉😂
So nice 🙂👍
mantap
Great video. Thank you. Cheers.
No balancing
,,,,👍🇲🇾
Cool...now I know boat building shoes! STYLE...MY MIDDLE NAME
Canvas impregnated with asphalt laminated on today asphalt painted on the hole would make it incredibly strong. I’ve seen ocean going boats with nothing but canvas and asphalt
Sudah ok, tapi masih perlu di tambah trim dan sirip. Untuk kurangi oleng samping dan angguk depan.👍
Achei um ótimo trabalho, gostaria de saber as medidas .
This boat need its own liveboat ,mandatory .
wonder how long pine will last in that setting.
You are a great woodworker and I applaud your boat build! What are you going to name her? Make your next one bigger, and try to use a steamer to steam the long pieces of wood so you can use one piece and bend it, making it monolithic from front to back. Keeping the planking and d structural monolithic, at least from front to back will increase the strength overall of your craft. Best of luck and smooth sailing friend! 🙏💪👍
@@dozerboy67 what if he doesn’t have long pieces of wood, looks like he was using scrap pieces.
Hi. You did really good job on that small boat .but you know the screws will get rusty with time on water even you painted it with that black oil water resistant. I'm not spécialist on boats but I have some skills and I think that it will damage the wood with time. Anyway it's just my opinion. Thanks 👍
❤
it was all going good till the end, was thinking of finishing the product, to be continued hhhhhh
I grew up shrimping on 50’ Biloxi Lugger. Been around boat yards all my life. This guy is talented! Have some respect. Keep your mouth shut if you can’t say something nice. Or post a video of you trying to build a canoe. Probably don’t own a saw.
Excellent !
Okay this boat was built in a few hours.
It's built with cost effectiveness in mind. It's also probably sold for cheap.
As long as it works.
I am pretty sure these guys can build what ever you think is the special way to build it. Like lots of youtubers do.
They take long time. Obviously cost more. Probably the economic situation of the customer doesn't allow it.
Does the job.
极好的
Beleza de barco 👍👍👏👏👏👏
Tjv8i😊
oi amigo ja me inscrevi no seu canal desvejo muita paz e sorte like merecido sucesso
Why the weak spot in the middle of the boat? I assume you have no long boards.
Lindo trabajo pero si ponen 2.000.000 de tornillos es necesario mostrarlos a todos ?
How many deck screws was that?
Porque o dedo nervoso pra usar a chave de impacto ??
Супер!
You did a very excellent job it looks very good and the voice seem to be having a good time but you were very talented in carpenter I’ll keep watching you God bless
It would be more stable if you gave it a wider stern
weak manner at 4:44, grain needs to follow the curvature.
Amazing ini cara baru ni kan ada cara baru sempal ke up2
Very nice work. You're very talented. 👏👍
The clue he is using is that silicone? and what is the black they melted outside the boat,,
Excelente
去到海水肯定(翻船)
Is it spruce wood?
Only good for Viking funeral fire.
Наглядное пособие как Не Надо строить лодку.
Для хождения по рисовым чекам-отличный пепелац.
🤝👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Gut gemacht, nur schade das das schöne Holz von diesesTeer verdeckt wird. Es gibt andere Methoden Holz abzudichten.
Jangan koment yg tidak baik...brow... nyatanya bisa mengapung... itu kalo di desa saya namanya sampan / prahu kecil untu sarana antar rumah...bila sebagian besar desa itu biasa terkenang air.... biasanya dikayuh ibu ibu..apa untuk belanja... cuma di sekitaran desa tersebut.... tidak untuk mengarungi laut.... mengerti...brow...?
There is no way that I would ever buy a boat from him he has all the planking joints on one station also he didn't know how to wrap his buttons around the bulkheads crazy.
My thoughts exactly.
Резать дерево поперёк волокон - это значит полностью разрушать его структуру 😢
Bigung cara kerjanya..
All I saw was a guy pole the boat around a shallow pond. There were no oars or oarlocks. The boy with the double-end paddle was not using it, possibly because the boat was too heavy to paddle. Anyway, sitting on the deck is too high and unstable, and sitting on the floor is too low and wet -- seats about midway in height would be about right. The tar will likely be a mess in the sun. Need a line on the bow (called a painter) to help dock and secure the boat.
However, you put in a lot of effort and material and you know your carpentry, so I wish you well. Just stay away from deep water. 😊
And you couldn't say anything positive? I think he's design for where he wants to use it is perfect, particularly when you allow for the costs. He did not make it to sail across Pacific.
@@marktanska6331 Re-read the next-to-last sentence of my comment. Also the last sentence.
Apa nama lem untuk perekat kayu..
💯👍🏻👍🏻👍🏻🍻🥳✌🏻🙏🏻🇺🇲
Looks like a waste of second rate timber on a third rate design.
Hello please anyone give me sizes and drawing of the ribs. and their inclines.
Belo trabalho mesmo viu mestre 🤜🏻🤛🏿👏🏿👏🏿👍🏿👍🏿🙏🏿, só uma pergunta que madeira e esta??? Esta parecendo o Pinus !!!???
Ruined it for me when you asphalted the hull
應該是在做模型要不然一根釘子就能成行嗎i
Why do all of his joints end at the same spot? Seems like it’s an inherent weak spot. They should be staggered. Am I wrong? I’m not a hater I just know a little bit about building things.
င်းတို့စက်လှေရိုက်လို့သုံးတဲ့ကော်ကဘယ်နှစ်နှစ်လောက်ရေလုံသလဲ၊ကော်ဗူးအမည်ကဘာတဲ့လဲ၊စျေးနှုံးဘယ်လောက်လဲ။
Too many oddly placed butt joints for my liking. He could have run some of the stringers and boarding better.
NOAH : HOLD MY BEER.
I have a lot of respect for the builder, but none for some of the shitheads in the comments section.
Ужас! Неужели это правда?
🤗🤗🤗🤗🤗🤗💯💯💯💯💯👍👍👍👍🇰🇷
schlechte und unsaubere arbeit bei uns in deutschland wird ein gerissenes brett ausgetauscht
I think it must have been this craftsman's? first boat build, faults too numerous to mention. Maybe just a kids playground toy?
You should have your own RUclips channel.
Bull
He did great job
There’s more than one way to do something
I bet that boat will outlast any boat you could ever build
One good wave and snap….
Quite right it’s a personal failing of mine, being critical. It was a low cost project, built very quickly, and does the job it was intended for.
hack
Not 4 me
Yalıtım işçiliği çok kötü
This will sink in ten minutes
👎👎👎👎👎👎👎👎👎👎
Yc
ho
ون يكن
WTF
now that's an ugly boat
Looks Chinese - yes I am sure it will not sink. LOL>
херня- на днище и на стыке борта и днища нужно класть целые доски, от носа до кормы.
Horrible work ! Not a professional boat builder
All the usual experts know everything but they don’t ever make videos do they ?
I myself don't see anything wrong with that boat 🛥 I believe he did a good job other than the stern but it's still good job
It’s looking good for the shape, you’re right about the stern, if he makes it a little wider, that would be great 😊
Содист шоруповерта