at 3:19 you pull a corner where the extruded side was on, and the other side, with no extruded end or matching vertices also moved, what option did you enable for that?
I have enabled x - mirror option (you can find on top corner right side in side of butterfly symbol).... After I symmetry ize the mesh.. which give both side same vertices...I hope you understand...👍🏻
@@dr.hstudio20 hm I have that enabled as well but it doesn't work like yours...alrighty! If I figure it out I'll comment back here, but ty for the vid! Super helpful as a beginner hobbist of blender ^^
Bro 🙋♂️ Go to Edit >Preference> Click on Input > Then turn on (Click mark or enable) the Emulate 3 Button Mouse > Save preference. That's it - After you double click on Vertex, Edge, Face loop it will select Whole Loop. { Note : Make sure if you are Modelling download Skull refrences. It will help you.} 🤜🤛
Bro...In blender in edit mode you will see on up on right hand side X button on it side there will butterfly symbol just turn on...then symmetry will be enable....(why butterfly symbol : Because in nature butterfly are somewhat similar in both side, so it give symmetry symbol) ...But make sure when using this your mesh should be in world origin (In simple : It should be in middle so both side of mesh are separated equally then symmetry will work)....still you don't get then..just type timing of video where you don't understand I will explain in detail🤗🙋♂️😃🤜🏻🤛🏻
@@GamerTheMexican sorry bro my house is not that good i don't have close room. So I can't record but now iam using to start AI for voice. I will make another video of skull again with sound. When I will make i will send you link.
@@dr.hstudio20 at the beginning of the video you're moving vertices on both sides without actually giving the cube a mirror modifier. that's what they mean.
@@myrkr_ Bro I think you are talking about On 29 second....Go to your Right side on top of your blender you will see butterfly symbol and X Y Z symbol on it side so enable the X icon on clicking it.... mirror will work 🤗
Bhai jyada mujhe aus video me response nahi Mila tha eis liya sod diya..lekin koi bat nahi Hindi banavunga....abhi thoda me dusre project me Kam kar Raha hu...bad me banavunga 😀👍🏻lekin tu ye video dekh krr bhi sik lega🤗🖥️
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
giga chad skull, thanks for the tutorial btw
😂 After completing skull model I realize it was not general Skull but it was giga Chad skull😂 but I hope you got tutorial 🙏
cool tutorial, thanks for your efforts and showing your method
at 3:19 you pull a corner where the extruded side was on, and the other side, with no extruded end or matching vertices also moved, what option did you enable for that?
I have enabled x - mirror option (you can find on top corner right side in side of butterfly symbol).... After I symmetry ize the mesh.. which give both side same vertices...I hope you understand...👍🏻
@@dr.hstudio20 hm I have that enabled as well but it doesn't work like yours...alrighty! If I figure it out I'll comment back here, but ty for the vid! Super helpful as a beginner hobbist of blender ^^
@@harrisonlane9664 thanks....make sure that both side is symmetrical...then it will work 👍🏻🤜🏻🤛🏻
what is this
left x 15
How do you move the teeth around with G on 5:25, mine only move up and down if i try to move it left to right it scales off idk why.
Bro...may be you are using mirror modifier...Go to modifier (wrench 🔧 icon) Apply modifier then Try to move With only pressing G it will work....
@@dr.hstudio20 it workss now thanks a lott
thank you
at 0:13 you triple click a vert and it highlights that entire line, when i triple click it only highlights a single vert, why :( ?
Bro 🙋♂️ Go to Edit >Preference> Click on Input > Then turn on (Click mark or enable) the Emulate 3 Button Mouse > Save preference.
That's it - After you double click on Vertex, Edge, Face loop it will select Whole Loop.
{ Note : Make sure if you are Modelling download Skull refrences. It will help you.} 🤜🤛
also can you rig it
How do you make it so when you move one corner of the cube for example it also moves the one on the opposite direction without selecting?
Bro...In blender in edit mode you will see on up on right hand side X button on it side there will butterfly symbol just turn on...then symmetry will be enable....(why butterfly symbol : Because in nature butterfly are somewhat similar in both side, so it give symmetry symbol) ...But make sure when using this your mesh should be in world origin (In simple : It should be in middle so both side of mesh are separated equally then symmetry will work)....still you don't get then..just type timing of video where you don't understand I will explain in detail🤗🙋♂️😃🤜🏻🤛🏻
@@dr.hstudio20 Oh thanks. I wasn't expecting it to be this simple, i missed out the part in the video where you did that, Appreciate it. 🙌
is there suppose to be sound
@@GamerTheMexican sorry bro my house is not that good i don't have close room. So I can't record but now iam using to start AI for voice. I will make another video of skull again with sound. When I will make i will send you link.
@@dr.hstudio20 dw i was just wondering bc i thought my headphones werent working or something
how did you move both side of the skull at the same time without using mirror i'm hella lost
Please bro write me down Timing where you don't understand...I will tell you in detail ⏱️
@@dr.hstudio20 at the beginning of the video you're moving vertices on both sides without actually giving the cube a mirror modifier. that's what they mean.
@@myrkr_ Bro I think you are talking about On 29 second....Go to your Right side on top of your blender you will see butterfly symbol and X Y Z symbol on it side so enable the X icon on clicking it.... mirror will work 🤗
@@dr.hstudio20 yeah, worked. wasn't aware of this neat feature. will be sure to make use of it more, thank you!
when is that hindi dubbed part 2 coming of this skull
Bhai jyada mujhe aus video me response nahi Mila tha eis liya sod diya..lekin koi bat nahi Hindi banavunga....abhi thoda me dusre project me Kam kar Raha hu...bad me banavunga 😀👍🏻lekin tu ye video dekh krr bhi sik lega🤗🖥️
Can You Have This Model?
Yep bro !
👇🏻You can also animate this model
drive.google.com/file/d/1xb7s9rK7MjvSRIdLHRweu-2WYGa4MOQS/view?usp=drivesdk
Thank You Bro@@dr.hstudio20
what is left?
Hey bro can you clarify what are you saying ? 🤔 So I can fix mistake in my modelling in future....👨🏻💻
Chelo
Koi to box modeling se sikha raha hai
Bhai i hate re topology
This is better
Fast and good
Thanks....ye bhi dekh na ruclips.net/video/KJL0uOGzuk0/видео.html
are u kidding