OH MY GOD! When I've seen the amazing final product before watching the making videos, I didn't expect the HUGE amount of work behind it, and challenges that you've gone through! you are a hero Estefannie!
Omg this is the best youtube vid you have done to date. I cant wait, nay.... I NEED the third instalment. So so so need closure :) Wow, you worked so so hard on this. Up at 2am with a light out in the dark working endlessly. This really is a perfect example of something someone wouldnt/couldnt do unless they legitimately loved doing it, as you clearly do. Awesomesauce!!!!!!! :) :) :) :)
Love your videos. I am always looking for your next video. Can't wait for the final video on the daft helmet. Your videos are very inspiring and full of ideas.
Great work. I’m on the same project and watching you go through the visor and vacuum molding issue was hilarious! I went through the exact same thing. Had to raise the hold to get the perfect visor. Moving on to the chrome plating next and tinting the visor.
OMG ARE YOU FREAKING KIDDING ME???! I was so into this and then you hit me with "To be continued.."? Man... anyways this thing is so dope and so crazy to see just how much went into it! I had no idea!
Nice work, I love it!. Just a note, that mask has a leaver for easy of use, you just need to loosen up the upper bands and pull the leaver down and you're ready to work :)
Definitely your most ambitious project yet! Amazing work, and even more amazing dedication! I would have quit at sanding a 1am. Hahah Can't wait for part 3!! And I'm sure shooting the video is a project in itself. I guess you've never tried tinting even slightly curved car windows or you would have known the tint idea wasn't going to work. lol. I've never been able to get tint to look good except on perfectly flat glass. There's definitely some skill needed for tinting curved surfaces..but to tint what basically amounts to a small radius half sphere would be extremely difficult. I think the only way you might have got it to work was to break it up into pie shaped pieces. But with the backing being plastic and not glass you can run a razor down, I think it would be nearly impossible. I'm really curious how you ended up getting it done! Part 3 please!!!
This is great! I’m currently working on mine now. Can you tell me what thickness and type of plastic you used for the visor? This is where I am struggling! I’m getting a lot of webbing in my vacuum form and I just can’t seem to get it right. Thank You again for sharing this
I feel your pain on the sanding part.. A lot goes in to these helmets. I have a Thomas and Guy Man (RAM Era) helmet finished and Chromed. Now I am working on my Discovery era Guy Man. Just finished the LEDs. So close to being done yet so far. Anyone looking to make these Helmets and you want to Chrome it contact Don at Coat of Chrome. He does amazing chrome work. Stay away from Creations N Chrome. I've had nothing but issues with them.
Rick Graham I could've! But due to timing I had to order it on Amazon and I couldn't find a tinted version. Past me thought tinting would be easy peasy :)
Someone please tell me some one said"she's up all night to get lucky "lmao no but seriously you are my hero I want to build this too how much did the LED lights cost
probably the hardest working youtuber out there
No.
Homemade Daft Punk Helmet timelapse 300H ruclips.net/video/SSmlWDFfArE/видео.html
She definitley isnt
OH MY GOD! When I've seen the amazing final product before watching the making videos, I didn't expect the HUGE amount of work behind it, and challenges that you've gone through! you are a hero Estefannie!
Having witnessed your slow demise in person, watching this back is giving me cold sweats. But the end result was so damn worth it.
I love the juxtaposition of the very different types of music. Also, we have to wait for Part 3?! Ahhhh!
You know that feeling when you find a new channel that you absolutely love... Yeah. Right now.
Your dedication and commitment are of a special kind!
Harder Better Faster Primer! And the sanding! Oh the sanding. But then the cliffhanger! AGAIN! Ahhhhhhhhhhhhhh!!!! (I am loving this mini series!)
Figments Made thank you so much for watching!!!
Thank you for making awesome videos! 😉
So much work. Congrats!!!
This video took me on a JOURNEY
Omg this is the best youtube vid you have done to date. I cant wait, nay.... I NEED the third instalment. So so so need closure :) Wow, you worked so so hard on this. Up at 2am with a light out in the dark working endlessly. This really is a perfect example of something someone wouldnt/couldnt do unless they legitimately loved doing it, as you clearly do. Awesomesauce!!!!!!! :) :) :) :)
*turns to others* stop watching game of thrones, what are you crazy, THIS is where the viewing gold is. This vid right here.
GlenCodes ahhhhh thank you so so so much!!! The build and the video have been a lot of fun. Thank you for appreciating my work :))))
Love your videos. I am always looking for your next video. Can't wait for the final video on the daft helmet. Your videos are very inspiring and full of ideas.
Great work. I’m on the same project and watching you go through the visor and vacuum molding issue was hilarious! I went through the exact same thing. Had to raise the hold to get the perfect visor. Moving on to the chrome plating next and tinting the visor.
Edgar Del Cid What thickness of PETG did you use? Kind of struggling to get it right
6:42 the music from the game Mount your friends!
Insane amount of effort put into this, well done!
OMG ARE YOU FREAKING KIDDING ME???! I was so into this and then you hit me with "To be continued.."? Man... anyways this thing is so dope and so crazy to see just how much went into it! I had no idea!
Good job Estefannie!
Nice work, I love it!.
Just a note, that mask has a leaver for easy of use, you just need to loosen up the upper bands and pull the leaver down and you're ready to work :)
You look beautiful and your videos are amazing, good job, keep it up, waiting for part 3!!☺ ☺
Definitely your most ambitious project yet! Amazing work, and even more amazing dedication! I would have quit at sanding a 1am. Hahah Can't wait for part 3!! And I'm sure shooting the video is a project in itself.
I guess you've never tried tinting even slightly curved car windows or you would have known the tint idea wasn't going to work. lol. I've never been able to get tint to look good except on perfectly flat glass. There's definitely some skill needed for tinting curved surfaces..but to tint what basically amounts to a small radius half sphere would be extremely difficult. I think the only way you might have got it to work was to break it up into pie shaped pieces. But with the backing being plastic and not glass you can run a razor down, I think it would be nearly impossible. I'm really curious how you ended up getting it done! Part 3 please!!!
cant wait for part 3
Loving these videos. Informative, amusing and well made
well done series! I was hooked through the entire video!
Are those periodic labels on your cooking supplies? If so that is so cool!
This is great! I’m currently working on mine now. Can you tell me what thickness and type of plastic you used for the visor? This is where I am struggling! I’m getting a lot of webbing in my vacuum form and I just can’t seem to get it right.
Thank You again for sharing this
What a great work!!
The helmet is amazing and you have made a great job but the helmet is yellow-golden
This was randomly reccomended to me.. haha nice job
BigSleazy thank you!
I feel your pain on the sanding part.. A lot goes in to these helmets.
I have a Thomas and Guy Man (RAM Era) helmet finished and Chromed. Now I am working on my Discovery era Guy Man. Just finished the LEDs. So close to being done yet so far.
Anyone looking to make these Helmets and you want to Chrome it contact Don at Coat of Chrome. He does amazing chrome work. Stay away from Creations N Chrome. I've had nothing but issues with them.
was that "sanding:one more time" a pun? cuz they made a song called one more time. like the"harder,better,faster,primer"
Harder better faster primer 😂
Yea, I now have a crush.
Could you not have used tinted plastic for the visor?
Good work on that btw.
Rick Graham I could've! But due to timing I had to order it on Amazon and I couldn't find a tinted version. Past me thought tinting would be easy peasy :)
Amazing!! I need 3 part pleasee
Can you still use the oven after using it for a project like this?
NEED. NEXT. EPISODE.
Texans work with their boots on ALWAYZZZZ HIYAAAAA!!!!!!!!
Do you have a list of all the tools you used?
Cuánto tiempo tardo en imprimirse las piezas del casco?
se puede usar la estructura base del casco para sacar moldes y fundirlo en aluminio
How much is the cost for all the helmet? can you sell one?
How thick is plastic for visor??
podría haber usado una pistola térmica para dar calor al plástico y moldearlo a mano
Yo quiero uno. Me podrías hacer uno???? 😁👍
Someone please tell me some one said"she's up all night to get lucky "lmao no but seriously you are my hero I want to build this too how much did the LED lights cost
Priming on amazon prime box: STONKS!
can u share the stl's for the helmet?
I'm gonna guess you figured out to use warm water and Rit dye to tint your lens :)
Can I by any chance buy one?
When is the next part ?😱😱😱
Chp 8: one more time
Me: I see what you did there
the second part!!!!!
+1 to sanding skill
WHEN DOES PART 3 COME!!!!!...
Hello, have you a Selección Mexicana fútbol T-shirt???
Final part why not just using spray paint?
😁👌
You're crazy! In good sense of word :))
love the music XD
You are seriously cute! Love to watch your works
Que chingona playera verde
FYI acetone smoothing would have cut down on that sanding.. give it a try. Works on abs and pla
Pepakura may have been a better option.
Waooooooooooooooooooo increible❤❤❤❤
You can buy a helmet for 15 bucks on amazon
te amo!
No more sanding I'm already tired😬😬😬...... now i want that.... 😭😭😭😭
Files?
#hardwork
Am i the only one who wanted one of these
Priming on prime
Nice, me suscribire! :)
❤❤❤❤
👍🏻👌🏻
Lol we heard all of Beethoven's symphonies
It's like epopoeia
subscribed
punish props made a diy vacuum former it be easier
认真做事的妹子最可爱👍
Mano, que mina perfeita!
Casate conmigo, sos la mujer perfecta ! Muuuuuuuuuuuuuy buen trabajo !!
like numero 920
Yo soy de México
Viva México🇲🇽 cabrones jajaja y también los tacos XD
PD:que buen video:v
Naise go profi sor
I feel kind of guilty watching the video while sitting on my chair doing nothing :/
Вы красивая
Part 2 of watching a woman slowly lose her sanity
Protogens be like OwO
She was listening Oliver Tree
F
You re pretty
There's no part 3, so i assume she's dead
You are so cute !!!!
I just made this with all your instructions