Old fd salvage and overhaul trick. fold the end your rolling to back anout 8' so the end is captured within the roll. Also take both long edges to the centerof your workpiece so contents can not spill out of the open edge fold end 8' to center start roll at the bent end & same for other end. Contents captured.
@ 1 06 u all put in what u call ( hold tight ) w/ the recycled bottle glass in side the machine..... SOO WHAT IS HOLD TIGHT..... in very very simple form......
We don't think coffee grounds would work very well, but here is a quick video that goes over the abrasive you CAN use! Anything that is clean, consistent, and sinks in water is a good choice :) ruclips.net/video/hFP-z_w6yXY/видео.html
Hi there! Yes, just like any other tool, damage can occur with the Dustless Blaster if it is used improperly. Warping wouldn't occur due to heat, but the operator getting too close or using pressure that is too high. For large flat pieces of metal like auto trunks or hoods, we recommend using about 70 PSI at a 20º angle to avoid bending metal. Here is a video that goes over nozzle control and how you can use standoff distance to avoid damage: ruclips.net/video/ijtRDiO2Qr8/видео.html
ReaL Alliance yes you can, I have a dustless blasting business and I use the db500 on everytging from wood to line stripping and yes that includes panels. I have even done 6 door quarters without warping!
This is going to be my New Business .
Here's your starting point: www.dustlessblasting.com/business-opportunity
I would absolutely LOVE to own one of these machines!
Old fd salvage and overhaul trick.
fold the end your rolling to back anout 8' so the end is captured within the roll.
Also take both long edges to the centerof your workpiece so contents can not spill out of the open edge fold end 8' to center start roll at the bent end & same for other end.
Contents captured.
Thanks for the tips! We are always trying to put out the best real world info.
How many times was the pot refilled for this job?
It was refilled only once on this small job.
Any chances the panel getting warps??
Does it remove graffiti well
@ 1 06 u all put in what u call ( hold tight ) w/ the recycled bottle glass in side the machine..... SOO WHAT IS HOLD TIGHT..... in very very simple form......
It is a rust inhibitor. We now offer our own you can learn more about it here.
www.dustlessblasting.com/products/rust-inhibitor
what about weather temps? it has o be what to blast above 40 degrees? what is the cut off temp! please advise asap. thanks
I wonder how viable the market for this type of service is in South Carolina...🤔
Looks to me he is taking off a thin coat of red primer off ,easy peizie IMHO!
I can't even get my girlfriend to strip. And you think I can strip a car? LMFAO
Excelent its good idea a better product for a few industries related. Thanks
Blastless Dusting
Hi..do you have distributor in the Philippines?
What type of media is it can I use coffee grounds to blast a car
We don't think coffee grounds would work very well, but here is a quick video that goes over the abrasive you CAN use! Anything that is clean, consistent, and sinks in water is a good choice :) ruclips.net/video/hFP-z_w6yXY/видео.html
6:20 rinse it down with what ?
Is that the rust inhibitor?
Yes
Yes. Just tap water mixed with the rust inhibitor.
Yes, you rinse with the rust inhibitor. It's mixed in a 1:100 ratio with water and will prevent flash rust for up to 72 hours.
No whip checks on hoses
Ed Fay I was thinking that
read the title. Did it say safety tips?
doesn't warm panels with heat...But it does with the high pressure ;-) .
Hi there! Yes, just like any other tool, damage can occur with the Dustless Blaster if it is used improperly. Warping wouldn't occur due to heat, but the operator getting too close or using pressure that is too high. For large flat pieces of metal like auto trunks or hoods, we recommend using about 70 PSI at a 20º angle to avoid bending metal. Here is a video that goes over nozzle control and how you can use standoff distance to avoid damage: ruclips.net/video/ijtRDiO2Qr8/видео.html
How many bags of media were used for this project?
not sure about this particular job but a car blast can use 4-6 bags in 1-2 hours.
can you use the DB500 on body panels?
ReaL Alliance yes you can, I have a dustless blasting business and I use the db500 on everytging from wood to line stripping and yes that includes panels. I have even done 6 door quarters without warping!
I want a job
How much is this specific machine?
Hi John, the DB150 costs $5,995. store.dustlessblasting.com/collections/machines/products/db150