Normally open means off before power. So ground one leg and connect positive to the positive terminal and a common. Test the led from power to determine pos neg
Hi, i purchased this unit but can't accomplish to LEARN the remote controls. Once i had succeeded but don't remember how. Anyway when i turned DC off and then started again - it lost all the memory. How do i learn the Keys and how to i SAVE them for a future in the memory of the module? Thanks
Perfect for Airsoft claymore either deploy or toggle on off for setting claymore with PIR motion detection sensor so off while setting remote control arming of pir sensor otherwise it will deploy on yourself
Not a very good "how to" video. The presenter assumes the viewer knows way too much, and never really explains how to wire up the relay. Small things also, like the glue: nice idea, but more details would be welcome, such as what kind of glue, are there places on the circuit board not to get glue on, etc. You should also spell out your website. Careyshop.com? Kerishop.com? There's lots of ways that that could be spelled.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
AFTER SEEING YOUR VID i am more confused as to conecting which wire from the relay did you use i,e, nc or com or no to which side of the led
Normally open means off before power. So ground one leg and connect positive to the positive terminal and a common. Test the led from power to determine pos neg
How do ya use it to open a garage door? Not sure on the wiring, and unable to find a good diagram
You would just pass the wall mount button signal through one relay. Common and normally open.
Thank you very much for the video, I have one question, how can we do the open and close with a clock, 5 PM open 7 PM close.
Hi, i purchased this unit but can't accomplish to LEARN the remote controls.
Once i had succeeded but don't remember how. Anyway when i turned DC off and then started again - it lost all the memory.
How do i learn the Keys and how to i SAVE them for a future in the memory of the module?
Thanks
Dude explain the outputs are you using NO,NC or com
Typically you run a jumper from positive to the common and your light to normally open and ground
Perfect for Airsoft claymore either deploy or toggle on off for setting claymore with PIR motion detection sensor so off while setting remote control arming of pir sensor otherwise it will deploy on yourself
👏
hi is this able to run two fog lights around 20amps
What are the dimentions on the circuit board inside the remote?
does work any transmitter with any other receiver
Can you run the receiver on the nine volt battery
mpmccurry did you get wireless receiver to work of a 9 volt battery text reply to 540-621-1719 please
send link to buy this transmitter and reciever
is the little plastic thing important as mine never had one when it got delivered maybe thats why mines is not working what can i use in its place
+joe gormanly Search on ebay, for "jumper" maybe?
Hey what was your website?
Sir my car remote locking receiver is not.getting signals from key fob. How to repair it??
Any receivers that do not require 12 volts? I want to make something portable
can i use it for an RC car
The little plastic thing is called a jumper.
i cant control it :( i do the same method like u . my led wont light up but the relay works
I want to make a receiver control any remot
what is the range
i tried doing that with a 5v dc motor but after i connect the wire the motor starts to spin with out my command, what did i do wrong? :/
You wired it either to normally closed terminal or just wired the motor to power
How do I make the continual beep stop?
does the RF receiver generate sound by it self when the relay is energized?
Email me with questions at RSTproducts@gmail.com website is www.caryshop.com or RSTebayStore.com
theyjustin C
Not a very good "how to" video. The presenter assumes the viewer knows way too much, and never really explains how to wire up the relay. Small things also, like the glue: nice idea, but more details would be welcome, such as what kind of glue, are there places on the circuit board not to get glue on, etc. You should also spell out your website. Careyshop.com? Kerishop.com? There's lots of ways that that could be spelled.
easy . use as remote car starter
Hi can you send me the wiring diagram? I think I'm gonna use this on my motorcycle 😉
João Félix just take the two wire on starter then put it too this relay
Hummm ok, but I want to work like a Ignition, to work without a key
+João Félix i will show u the diagram later alright ?
Ok, thks a lot. jfelixdesign@gmail.com
Thanks mate, u solve my problem !!! cool
little plastic thing ?? do you mean (A JUMPER) bad explanation whole video
if u want rf remote all Type please click here for Contact:
drive.google.com/file/d/1XQ4pqKecr0rbAZkqyHlBUe6vZ41nmZej/view?usp=sharing