excellent videos! 👍👍 very clear and helpful. I wonder why your German colleagues can't do something like that! maybe i just haven't found these videos in german 😄
Hi Tobias, Thank you very much for the feedback! I'm very happy to help! I wish I had a good answer for your question :) Happy Holidays Tobias! Cheers.
Rodrigo thanks for this video the explanation ii was easy and help me to understand basic staff . My only suggestion will be for next time improve the audio or speak loud. Sometimes had a hard time to listen what you said. Other than that. Thank you
Hi Juan, Thank you very much for the feedback, I'll definitely keep your suggestion in mind! I have recorded a few other videos with a better microphone. I hope the sound is a little better. - IndraDrive Tutorial: ruclips.net/video/u5VRU7Wfbq0/видео.html - MLC Tutorial: ruclips.net/video/gshbnO39o1w/видео.html
Hi Tomaz, I have no experience with Indradrive, but I have seen your video 'IndraDrive Configuration Basics Tutorial', it is a clear video and very helpfull for testing my drive. Now I want to jog forward/reward the drive by using 2 digital inputs and also adjust the Velocity by using analog input. You have a lot of tutorial video's, but in which do you explain using digital and analog inputs ?? Thanks in advance Wim Borsboom
Hi Wim, There's no video showing the exact configuration you're looking for, unfortunately, but I think you can figure it out by watching the following: ruclips.net/video/gNPgAms5jOQ/видео.html and ruclips.net/video/u5VRU7Wfbq0/видео.html You may find detailed information here, also: developer.community.boschrexroth.com/t5/IndraWorks-IndraControl-for-MLC/bd-p/dcdev_community-dcae-indra/?page=1&size=25&sort=latest-topics&filter=none&search=&mymessages= I left Rexroth a few years ago, so I no longer have access to their devices to record new content. I hope the information above will help. Thanks for watching the videos! Cheers.
I forgot to mention before that you'll need to configure Operation Mode also. Here it is: ruclips.net/video/u5VRU7Wfbq0/видео.html You should watch this entire video if you have time. It will give you a better perspective of IndraDrive configuration process.
Hello Rodrigo, your videos helped me a lot. May I ask you, if it is possible to generate a custom motion profiles in the MLC? Such as movement of the axis on the sine wave trajectory? Thank you!
Hi Dominik, I'm glad to hear that the videos have been useful. MLC is a very powerful motion controller, and it does provide tools to create custom profiles as you need. I'd suggest you take a look on FlexProfile. You should find details on IndraWorks help files. I'm no longer with the company, so I don't have access to equipment anymore, unfortunately. I hope that information will help. Cheers.
Prezado Rodrigo, boa tarde! Primeiramente, quero agradecer, pois tenho aprendido muito com seus videos. Sobre tudo busquei um vedeo que pudesse me mostrar como faço para descarregar o programa de um PLC para o PC. embora eu não trabalhe diretamente com PLC, tenho um Rexroht, IndraControlL.20, onde fico praticando, e aprendendo. Muitas das dificuldades eu consegui superar através de seus videos, consigo programar e colocar para rodar o PLC, mas quando tento descarregar do PLC para o computador não eu não consigo, pode me ajudar nisso. Abraço e obrigado mais uma vez, poste mais vedios como estes é bom e legar eu mesmo não conheço bem dizer nada, mas seus posts me ajudaram a ter uma noção melhor de PLC.
Oi Anderson, Agradeço pelo feedback! Eu saí da Rexroth há alguns meses e não tenho contato com L20 há vários anos já. Talvez você encontre suporte técnico neste site: rexrothsupport.discussion.community/ Grande abraço!
Hi Alex, I can certainly do that in the future. For the meanwhile, I'd suggest you to post a question in the online forum here: rexrothsupport.discussion.community
Thanks for the feedback! I'm glad you liked it! As far as the missing Optimization/Commissioning tool, the only reason I can think about is that either your IndraWorks version or IndraDrive firmware version is too old. * Are you using the current version of IndraWorks? Download link is available in the description of the video. * What is the firmware version of your IndraDrive? You can check it through parameter S-0-0030. There's a limited version of the Optimization/Commissioning tool on earlier FWA versions (5VRS and below), but only versions above 7VRS should look similar to what I'm showing in the presentation.
Hello Rodrigo, I saw your experience with Rexroth on your RUclips. I have a problem with PPC-r22.1 error E411 and drivertop. Could you reach out to me bro?
Thank you for the video. However, is it possible to use PLC Simulation Mode (simulating IndraLogic L or XM series) and simulate OPC server? So, for example, i can run both PLC Simulation (using IndraWorks ML), and then run OPC client in my own computer (without actual IndraLogic Hardware) to connect to the simulated PLC? Thank you
With a MLC project (XM or Lx5 controller), you can run basic PLC logic in simulation mode by right-clicking on the controller and selecting "Simulation". OPC won't work in simulation mode though! In case you have further questions, I'd suggest you to post on the Rexroth Forum for faster response, here: rexrothsupport.discussion.community/
Hello Rodrigo. Thanks for your video it is very helpfull. I am trying to set an Profinet Ip via Indraworks. But it gives ''written protected'' warning. I search and seemd it is needs to be deactivated. How can i do this and what is the password for it. Thanks. Have a good day.
Drive Top is an older system, and I’m not familiar with it. You can try to post your question on the forum. Someone may be able to help you there! rexrothsupport.discussion.community/
Hi Filip, I can certainly do that in the future. For the meanwhile, I'd suggest you to post a question in the online forum here: rexrothsupport.discussion.community
Hello Gilles, DKC is an older series of Rexroth Servodrives and are not compatible with IndraWorks. You will need the software DriveTop instead. I'm not really familiar with DKC, but you can find tech support on this page: apps.boschrexroth.com/microsites/dcus/campaigns/indramatfactoryrepair/index.html
Hi Yulien, On this page ( www.boschrexroth.com/en/xc/products/product-groups/electric-drives-and-controls/servo-drives/compact-converter/hcs01 ), under , you will find a file called "20190607_PNDCP_TIA_plusTN_ProfiSafe_V1.0.zip" with detailed instructions. In case you have further questions, I'd suggest you to post on the Rexroth Support Forum (here: rexrothsupport.discussion.community/ ).
Hello. I tried to connect to servo. Ping passes. The addresses I need appear in the list, but it says that request name is correct, but the data of requested type is not found. The computer is in the same subnet with servo. This is error may be due to non-compliance with IndraWorks version?
@@lichaelapruebo4066 you can use a memory card for that, depending o the version/model of the drive. But you may need Rexroth technical support for that.
@@RodrigoGTomaz hi i bought a new drive board csbo1... I tried to load the parameters that I got and save from the old one that is currently working. But when I tried to start F8022 is showing. And from the PC it shows the drive is disabled
I loved your videos! I would like you to Help me, because i haver HCS01 and you haver erro F2190(incorrect Ethernet configuration). In The menu (selecting The conection) front of you appears a aquarela(identify) and another conect instead of the word conect in The blue as informações your videos...unable to reboot! Thanks
Hi Luis, You need to make sure that both IP and gateway addresses are in the same subnet. Example: if IP = 192.168.1.1, the gateway must be 192.168.1.x. You can find more appropriate tech support at our online forum, here: rexrothsupport.discussion.community/
Hi Felipe, IndraWorks-Ds is free and is good for Drives and VFDs. All other IndraWorks versions (ML, MLD and MTX) require license, but you can easily activate a 30 days test period during installation. You can find it under the DOWNLOADS tab in this page: www.boschrexroth.com/en/xc/products/product-groups/electric-drives-and-controls/engineering/software-tools/indraworks-engineering
Hello Ahmed, Here it is : www.boschrexroth.com/en/xc/products/product-groups/electric-drives-and-controls/engineering/software-tools/indraworks-engineering I suggest you to download "IndraWorks Ds 14V24_P2 (incl. online help)" Thanks for watching the video!
@@RodrigoGTomaz Rexroth IndraMotion for Metal Forming 05VRS i have a problem at my servo motor for roller feeder , the servo doesn't operate in automatic and also for the manual , i checked the servo motor and all is OK . in the manual mode , when i want to jog forward or backward , the drive gives that the motor move forward with status message "M Jog+" but it doesn't rotate. when i see parameter P-0-1370, Manual Velocity ,it's value equal to zero . when i tried to edit it to another value , it goes again to zero . the main problem for this case is the servo motor rotate with zero velocity . when i connected online with rexroth servo drive we find that the feed parameter manual velocity p_0_1370 is equal zero setup velocity P_0_1371 is equal zero bipolar velocity P-0-1372 equal zero and when i change them it return again to zero
Get access to exclusive resources and support on Industrial Automation. Sign up for our newsletter now at www.motionpeek.com.
Thank you Rodrigo. it was very helpfull. I am just starting with Indraworks and that is exactly what I was looking for.
Hi Dani,
I'm really glad I was able to help! And thank you for the feedback!
excellent videos! 👍👍
very clear and helpful.
I wonder why your German colleagues can't do something like that!
maybe i just haven't found these videos in german 😄
Hi Tobias,
Thank you very much for the feedback! I'm very happy to help!
I wish I had a good answer for your question :)
Happy Holidays Tobias!
Cheers.
Rodrigo thanks for this video the explanation ii was easy and help me to understand basic staff . My only suggestion will be for next time improve the audio or speak loud. Sometimes had a hard time to listen what you said. Other than that. Thank you
Hi Juan,
Thank you very much for the feedback, I'll definitely keep your suggestion in mind!
I have recorded a few other videos with a better microphone. I hope the sound is a little better.
- IndraDrive Tutorial: ruclips.net/video/u5VRU7Wfbq0/видео.html
- MLC Tutorial: ruclips.net/video/gshbnO39o1w/видео.html
Hi Tomaz, I have no experience with Indradrive, but I have seen your video 'IndraDrive Configuration Basics Tutorial', it is a clear video and very helpfull for testing my drive.
Now I want to jog forward/reward the drive by using 2 digital inputs and also adjust the Velocity by using analog input. You have a lot of tutorial video's, but in which do you explain using digital and analog inputs ??
Thanks in advance
Wim Borsboom
Hi Wim,
There's no video showing the exact configuration you're looking for, unfortunately, but I think you can figure it out by watching the following:
ruclips.net/video/gNPgAms5jOQ/видео.html and ruclips.net/video/u5VRU7Wfbq0/видео.html
You may find detailed information here, also:
developer.community.boschrexroth.com/t5/IndraWorks-IndraControl-for-MLC/bd-p/dcdev_community-dcae-indra/?page=1&size=25&sort=latest-topics&filter=none&search=&mymessages=
I left Rexroth a few years ago, so I no longer have access to their devices to record new content.
I hope the information above will help.
Thanks for watching the videos! Cheers.
I forgot to mention before that you'll need to configure Operation Mode also. Here it is: ruclips.net/video/u5VRU7Wfbq0/видео.html
You should watch this entire video if you have time. It will give you a better perspective of IndraDrive configuration process.
Hello Rodrigo, your videos helped me a lot. May I ask you, if it is possible to generate a custom motion profiles in the MLC? Such as movement of the axis on the sine wave trajectory? Thank you!
Hi Dominik, I'm glad to hear that the videos have been useful.
MLC is a very powerful motion controller, and it does provide tools to create custom profiles as you need.
I'd suggest you take a look on FlexProfile. You should find details on IndraWorks help files.
I'm no longer with the company, so I don't have access to equipment anymore, unfortunately.
I hope that information will help.
Cheers.
Prezado Rodrigo, boa tarde! Primeiramente, quero agradecer, pois tenho aprendido muito com seus videos. Sobre tudo busquei um vedeo que pudesse me mostrar como faço para descarregar o programa de um PLC para o PC. embora eu não trabalhe diretamente com PLC, tenho um Rexroht, IndraControlL.20, onde fico praticando, e aprendendo. Muitas das dificuldades eu consegui superar através de seus videos, consigo programar e colocar para rodar o PLC, mas quando tento descarregar do PLC para o computador não eu não consigo, pode me ajudar nisso. Abraço e obrigado mais uma vez, poste mais vedios como estes é bom e legar eu mesmo não conheço bem dizer nada, mas seus posts me ajudaram a ter uma noção melhor de PLC.
Oi Anderson,
Agradeço pelo feedback!
Eu saí da Rexroth há alguns meses e não tenho contato com L20 há vários anos já. Talvez você encontre suporte técnico neste site: rexrothsupport.discussion.community/
Grande abraço!
Tudo bem, mas fica aqui registrado meus agradecimentos e votos de felicidades.
@@andersoncampesi7339 muito obrigado! 👍
Good Morning!
Rodrigo, would you like to put an example of how to make a PLC uploard
Hi Alex,
I can certainly do that in the future. For the meanwhile, I'd suggest you to post a question in the online forum here: rexrothsupport.discussion.community
Hi tomaz, if i don't have a backup file project. Can i upload from MLC VPx it self?
Thanks, great video Rodrigo. My version of indraworks ds does not have commissioning option! why is that?
Thanks for the feedback! I'm glad you liked it!
As far as the missing Optimization/Commissioning tool, the only reason I can think about is that either your IndraWorks version or IndraDrive firmware version is too old.
* Are you using the current version of IndraWorks? Download link is available in the description of the video.
* What is the firmware version of your IndraDrive? You can check it through parameter S-0-0030. There's a limited version of the Optimization/Commissioning tool on earlier FWA versions (5VRS and below), but only versions above 7VRS should look similar to what I'm showing in the presentation.
Take a look at this video too, in case you need additional information about IndraDrive itself: ruclips.net/video/u5VRU7Wfbq0/видео.html
congratulations on class!
Aroldo Dias thank you very much!
Hello Rodrigo, I saw your experience with Rexroth on your RUclips. I have a problem with PPC-r22.1 error E411 and drivertop. Could you reach out to me bro?
Thank you for the video. However, is it possible to use PLC Simulation Mode (simulating IndraLogic L or XM series) and simulate OPC server? So, for example, i can run both PLC Simulation (using IndraWorks ML), and then run OPC client in my own computer (without actual IndraLogic Hardware) to connect to the simulated PLC? Thank you
With a MLC project (XM or Lx5 controller), you can run basic PLC logic in simulation mode by right-clicking on the controller and selecting "Simulation". OPC won't work in simulation mode though!
In case you have further questions, I'd suggest you to post on the Rexroth Forum for faster response, here: rexrothsupport.discussion.community/
Hello Rodrigo. Thanks for your video it is very helpfull. I am trying to set an Profinet Ip via Indraworks. But it gives ''written protected'' warning. I search and seemd it is needs to be deactivated. How can i do this and what is the password for it. Thanks. Have a good day.
Super. Can you help about Drive Top16.?
Drive Top is an older system, and I’m not familiar with it. You can try to post your question on the forum. Someone may be able to help you there! rexrothsupport.discussion.community/
@@RodrigoGTomaz Thanks for the answer. but I have an old controller dkc02.3 that I want to work with. can you advise about more best software.
DriveTop is the correct software as far as I know. Check the forum for additional support please: rexrothsupport.discussion.community/
Hi
Please can you show us how to configure analog inputs/outputs modules in IndraLogic.
Thanks
Hi Filip,
I can certainly do that in the future. For the meanwhile, I'd suggest you to post a question in the online forum here: rexrothsupport.discussion.community
Hello
Can IndraWorks be used with ecodrive DKC series?
Thank you!
Hello Gilles,
DKC is an older series of Rexroth Servodrives and are not compatible with IndraWorks. You will need the software DriveTop instead. I'm not really familiar with DKC, but you can find tech support on this page: apps.boschrexroth.com/microsites/dcus/campaigns/indramatfactoryrepair/index.html
Can I ask for help?
How do you clear the communication error code 83?
Bom día,amigo eu tenho un problema con un servo Indra Driver ,quisiera saber si puedes ayudarme ?
Can you show me how to connect indradrive with tia portal
Hi Yulien,
On this page ( www.boschrexroth.com/en/xc/products/product-groups/electric-drives-and-controls/servo-drives/compact-converter/hcs01 ), under , you will find a file called "20190607_PNDCP_TIA_plusTN_ProfiSafe_V1.0.zip" with detailed instructions.
In case you have further questions, I'd suggest you to post on the Rexroth Support Forum (here: rexrothsupport.discussion.community/ ).
Hello. I tried to connect to servo. Ping passes. The addresses I need appear in the list, but it says that request name is correct, but the data of requested type is not found. The computer is in the same subnet with servo. This is error may be due to non-compliance with IndraWorks version?
It could be that the firmware version of the drive is not compatible (too old or too new) for the IndraWorks you're using.
@@RodrigoGTomaz hi.. Can I update the firmware of the device if I can't connect to it?
@@lichaelapruebo4066 you can use a memory card for that, depending o the version/model of the drive. But you may need Rexroth technical support for that.
@@RodrigoGTomaz hi i bought a new drive board csbo1... I tried to load the parameters that I got and save from the old one that is currently working. But when I tried to start F8022 is showing. And from the PC it shows the drive is disabled
It needs to be enabled to easy mode
I loved your videos! I would like you to Help me, because i haver HCS01 and you haver erro F2190(incorrect Ethernet configuration). In The menu (selecting The conection) front of you appears a aquarela(identify) and another conect instead of the word conect in The blue as informações your videos...unable to reboot! Thanks
Aquarela=square
Hi Luis,
You need to make sure that both IP and gateway addresses are in the same subnet.
Example: if IP = 192.168.1.1, the gateway must be 192.168.1.x.
You can find more appropriate tech support at our online forum, here: rexrothsupport.discussion.community/
Exists any free version of this software?
Hi Felipe,
IndraWorks-Ds is free and is good for Drives and VFDs.
All other IndraWorks versions (ML, MLD and MTX) require license, but you can easily activate a 30 days test period during installation. You can find it under the DOWNLOADS tab in this page: www.boschrexroth.com/en/xc/products/product-groups/electric-drives-and-controls/engineering/software-tools/indraworks-engineering
plz can you give me a link to download indraworks software
Hello Ahmed,
Here it is : www.boschrexroth.com/en/xc/products/product-groups/electric-drives-and-controls/engineering/software-tools/indraworks-engineering
I suggest you to download "IndraWorks Ds 14V24_P2 (incl. online help)"
Thanks for watching the video!
@@RodrigoGTomaz plz can you give me your mail to ask you a question about my rexroth indra drive servo problem please
ahmed tooma you can post questions on our online forum. The link is on the description of the video.
Thank you!
@@RodrigoGTomaz
Rexroth IndraMotion for Metal Forming 05VRS
i have a problem at my servo motor for roller feeder , the servo doesn't operate in automatic and also for the manual , i checked the servo motor and all is OK .
in the manual mode , when i want to jog forward or backward ,
the drive gives that the motor move forward with status message "M Jog+"
but it doesn't rotate.
when i see parameter P-0-1370, Manual Velocity ,it's value equal to zero .
when i tried to edit it to another value , it goes again to zero .
the main problem for this case is
the servo motor rotate with zero velocity .
when i connected online with rexroth servo drive we find that
the feed parameter
manual velocity p_0_1370 is equal zero
setup velocity P_0_1371 is equal zero
bipolar velocity P-0-1372 equal zero
and when i change them it return again to zero
Hello 1:08