Hi I'm 63 years old South African lady soon to a grandmother for the very first time very excited n I'm definitely going to do this centrepieces for baby shower decor. Thank you kindly just adore you n your beautiful work.
This is an adorable idea so many options can be made from this. Don’t waste time and money on painting PVC pipe. Just wrap a 260 or two around it. I saw someone cover up an arch it was great idea and looked awesome.
@@debbiechaille6535 yeah that could be good too! I think it all comes down to your own design and the look you are trying to achieve. For this design at the time i didn’t think the balloon stick was such an eye sore ..
First of all, you’re ADORABLE!!! The three balloons is called a triplet or triad, either one works, hahaha. I love the blue water colors you used. Please show us when you use a PVC pipe. How do you hide the bottom of the plate beneath the balloons, I can see the glued on plastic piece. The entire centerpiece looks so nicer, especially with the bubbles, love it!!! Thanks so much for sharing your creativity!!! Blessings & hugs, Ciao Bella!!!
Love it!!!!!! What is the size thickness of the Balloon stick? I have some but yours look thicker and make sense to be thicker so the stick wont bend with the Bobo balloon.
honestly i am not sure the bag didn't say size or anything but I'll tell you they are like those yard balloon sticks for outside...so yes very thick although i would recommend to use pvc pipe instead that's even sturdier!
When you use the 160 inside a 260 method to make a spiral balloon and you get a tip like that you can tie a double knot in it close to the blown up part of balloon and cut off the tip. Then push the knot into the balloon and it will disappear. Sometimes it takes a couple of tries. Just push the knot as far into the balloon as you can. It’s amazing.
yes, this i know... I've shown how to do that method in one of my past videos.... i no longer do a 160 inside a 260 anymore because I've gotten better at only using a 260 balloon and making a curly, where you no longer get a tip at the end...
I seen that u don't have to use tape and tails on balloons...it's hard for me whatt tapes of tapes I use for walla balloons. Bday deco party's? On my house simple as bdays deco. ....ideas. help me I can tapes balloons??? Thanks 🥳🎂🎉😄💖🎈🎈🎈🎈🎈🎈🎈🎈
I dont know im not an expert like u,but maybe to make the balloon stick strudy maybe fill it with light cement or insulation foam🤷🏻♀️just to make it strudy and E-6000 glue it on the plate🤷🏻♀️i dont just an idea
thank you for the suggestion! these are pretty sturdy, but they are meant for indoor only. I see how the "light cement or insulation foam could work" but the only thing is that seems to be a lot of work to accomplish that, and more material which will affect the price of the final product. and when you have to sell a min. of 5 centerpieces it adds up $$$ For something sturdier i will recommend other types of bases for your structure such as lamps for outdoor or bases made out of wood. Less in price and time. remember all they are doing is carrying balloons that are not much weight the only reason will be wind!!! but like i said these are for indoors only.
Really?? Were you making them too tall so they became wobbly?? I only use the lamps from Walmart for outdoors because they are sturdier… but these have worked fine for me for indoors.🤷🏻♀️
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Hi I'm 63 years old South African lady soon to a grandmother for the very first time very excited n I'm definitely going to do this centrepieces for baby shower decor. Thank you kindly just adore you n your beautiful work.
Awww thank you so much and for watching my videos! Please don’t forget to subscribe!
Puedes transmitir para Latinoamérica? Es una pena no poder entender lo que dices, aunque sí entiendo lo que haces. Desde Argentina 🇦🇷
I really love this centerpiece idea; the bubbles makes it more beautiful!!!❤
Awww thank you 😊
Great advice on the pvc pipe. Thank you!
there is a video of a teddy bear centerpiece where i show you a wood stand worth watching!
ruclips.net/video/EbR3D84j8NY/видео.htmlsi=7AVlzBBLajB18UxG
This is an adorable idea so many options can be made from this. Don’t waste time and money on painting PVC pipe. Just wrap a 260 or two around it. I saw someone cover up an arch it was great idea and looked awesome.
You have just helped me with something sweet and simple. Thanks I love it.
you are a real natural just keep being yourself I love your videos
Awww thank you !
That bloom stick is a great idea!
I think so too!
I wondered if wrapping around the white stick centerpiece would be a better fit?
@@debbiechaille6535 yeah that could be good too! I think it all comes down to your own design and the look you are trying to achieve. For this design at the time i didn’t think the balloon stick was such an eye sore ..
I just want to say thank you! Your recommendations and tips are great.
Thank you for watching 😊
Thank you so much for this lovely video. Immediately you said duplet, triplet and quadruplet, I subscribed. You are such a joy to watch
Awww thank you so much for watching!! 🤗
Thank You! Good tips for easy and secure making!
Thank you for watching
Great ideas! Thanks
Love your idea
Thank you! 😊
I like it ideas beautiful 😍 but hard to copy but wen I like it I can do it will tooo.
Thanks for ideas.... I like also balloons deco. 🎈🎂🥳😄😄😄💖💖💖🎉
Thank you you for sharing, you are great. Thank again!
Awww thank you for watching!
Thank you for all you do
I love that. Definitely trying it ☺️
I am just learning. I couldn't figure out how to prevent the bubbles from untwisting but watch you helps...maybe tri plex
yes, it is very tricky and it takes time. just make sure all your bubbles you twist to the same direction so they don't become un-done
I laughed when I saw the teddy bear lying face down on the chair behind you! He looks like he's in time out!
Lol that’s my next project i have for you guys!
What did u use to hold the stick to the plate
Hot glue
Love the design....I'm going to try it....What about using a wooden dowel that fits the cup....I just did that with a topiary design. Love your videos
i think that will work too!
thank you so much for watching!
Hi. I tried making the bubbles but it comes out loose.. What do you think i am doing wrong.
@@BlessingAmez you gotta make sure you turn them in the same direction and turn them about 10 times but always holding the first bubble
First of all, you’re ADORABLE!!! The three balloons is called a triplet or triad, either one works, hahaha. I love the blue water colors you used. Please show us when you use a PVC pipe. How do you hide the bottom of the plate beneath the balloons, I can see the glued on plastic piece. The entire centerpiece looks so nicer, especially with the bubbles, love it!!! Thanks so much for sharing your creativity!!! Blessings & hugs, Ciao Bella!!!
Aww thank you for watching ☺️
Hi I love
Ur balloon videos
Will u post a video making balloon wedding center pieces ideas
Does the sticks bend ?
No they don’t
Hi blessings ty for the tutorial a question were do you buy the stick for the balloon ty
Amazon
Ty blessings
Love it!!!!!! What is the size thickness of the Balloon stick? I have some but yours look thicker and make sense to be thicker so the stick wont bend with the Bobo balloon.
honestly i am not sure the bag didn't say size or anything but I'll tell you they are like those yard balloon sticks for outside...so yes very thick although i would recommend to use pvc pipe instead that's even sturdier!
@@uptownevents4858 Thanks so much for your reply.
When you use the 160 inside a 260 method to make a spiral balloon and you get a tip like that you can tie a double knot in it close to the blown up part of balloon and cut off the tip. Then push the knot into the balloon and it will disappear. Sometimes it takes a couple of tries. Just push the knot as far into the balloon as you can. It’s amazing.
yes, this i know... I've shown how to do that method in one of my past videos.... i no longer do a 160 inside a 260 anymore because I've gotten better at only using a 260 balloon and making a curly, where you no longer get a tip at the end...
@@uptownevents4858 I hope to be able to quit someday. 😂
Where did you purchase the sticks w/ the connectors??
that was from amazon
just search for thick balloon sticks
❤❤❤😊
Hello what color balloons are you using
for the 260 they are silver and blue chrome from qualatex. They rest are pastel blue, and pearlized blues from kalisan
@@uptownevents4858 thank you for replying ☺️
I can't get my stick to attach to the plate....low temp glue gun I not working
try to re-enforce with tape? or a high temp glue gun.
hi where abouts do you buy the balloon stick. Is it a specific width?
You can get them on amazon they are the yard balloon sticks
Where do you get the clear sticks?
the clear sticks I got at a dollar store near me.
Hi super👌
From where do you buy all the stuff?
i get them from all different vendors... specially now with balloon shortages
What type of glue did you use to glue the balloon cup to the plate? And what type of double stick tape do you recommend?
Just regular hot glue... for double sided tape i get crafters tape
How far in advance do you do the arrangements?
2 days prior
❤🙏👍❤️
Can you please do a step by step video of how to tie the bobo balloon the clear balloon please
Try a clear acrylic pipe and connects
I am finding hard to curl my 260q
ruclips.net/video/sqjev_dIqC8/видео.html try this way
Nice design please show us if you make the pvc design.
I seen that u don't have to use tape and tails on balloons...it's hard for me whatt tapes of tapes I use for walla balloons. Bday deco party's? On my house simple as bdays deco.
....ideas. help me I can tapes balloons??? Thanks 🥳🎂🎉😄💖🎈🎈🎈🎈🎈🎈🎈🎈
I LIKE YOUR CENTERPICE , I TINK YOU CAN ADD ANOTHER SET OF CUADRUPLEX atthe botom to make it more estable
Why not put wooden screws in middle of plastic you can paint the wood to blue with spray paint.
Great suggestions!
Dowel is better to use
Yeah there are different ways to make a stand just gotta make sure in the end you work up the price of the wooden dowels
I dont know im not an expert like u,but maybe to make the balloon stick strudy maybe fill it with light cement or insulation foam🤷🏻♀️just to make it strudy and E-6000 glue it on the plate🤷🏻♀️i dont just an idea
thank you for the suggestion! these are pretty sturdy, but they are meant for indoor only. I see how the "light cement or insulation foam could work" but the only thing is that seems to be a lot of work to accomplish that, and more material which will affect the price of the final product. and when you have to sell a min. of 5 centerpieces it adds up $$$
For something sturdier i will recommend other types of bases for your structure such as lamps for outdoor or bases made out of wood. Less in price and time. remember all they are doing is carrying balloons that are not much weight the only reason will be wind!!! but like i said these are for indoors only.
Good instruction, but you’re not always in frame 🤨
sorry i had to re-watched the video to see what you were talking about... lol i'll keep that in mind for the next video thanks!
Used these sticks before. They are horrible. Had to go and buy the lamps from Walmart
Really?? Were you making them too tall so they became wobbly?? I only use the lamps from Walmart for outdoors because they are sturdier… but these have worked fine for me for indoors.🤷🏻♀️
Its called a trio
It's a tri plex
Or a triplet ☺️
Love your idea
Thank you!