Thanks for the upload my friend, I did the same got my figma figure and went to buy the cheaper version just for fun and customization. I know Figma is very expensive but really good quality. Also SH Figurarts released Lord Vyke and that is also a amazing figure for $ 90 at the moment, if you guys are interested.
Thx for the Info my friend. i already got him 😁 I was happy that Bandai released an Elden Ring figure but found the choice a little Bit odd. Got him for a bargain too because i think he didnt sell well. Hope they will release other S.H. Figuarts of Souls Games and not just Minis. Especially wish for a Ranni.
Tbh even at €180 the figma is still worth it imo. If you’re already that into demons souls that you want to get a figure from it you may aswell go for the one that’s drop dead gorgeous
Yes the original beats the copy for sure but just the retailer price is hefty. If you just now hear that a Figure like this exsist and want to grab it you will pay much more. So i wanted to show what the differences are and what you get if you opt for the copy. You get a lot for the 23€ i paid for it. I would have happily spend more to get better quality and maybe it would have been the better purchase between the two.
@@Abagone oh yeah for sure, great review btw, and I can defo see how the bootleg is worth it based on accessories alone or even just to leave in a museum pose. My figma actually came with a bent broadsword so I wasn't all happy with it lol.
Hey Vladimir. Yes the Torso is the greatest weakpoint of the original. It is overengineered and easily falls apart. And the movement range is pretty low. @5:24 in the Video iam showing the torso. There is no special trick to it. I place the stick in the upper torso and then push it in the lower half. When you assembled it dont pull just move. Like i said the range is quite low and if you pull, it just falls apart again. You can put a little bit of glue in the ball joints to tighten it. But you really have to be careful what kind of glue to use. To not really glue it permenantly. Many collectors use Kiki Fix for loose joints. I never used it. It is polyurethane finish that you can get in a hardware store. If you coat the ball with it it hardens and so the ball is a little bit bigger for a tighter fit. I didnt modify anything on the figure.
Hey 👋 Nice idea but i didnt got the Lady Maria Figma. I was tempted but right now iam drawing the line at Bloodborne. Maybe i would have bought them if they released with a little time between Lady Maria and the Hunter. Both at that time were not feasable and now i got neither 🤷♂️
Happy to help😁 In my opinion the 20€ are well worth it but dont expect quality. Just pick a pose and dont fiddle to much with it und you will be fine. If you collect other figures the weapons that come with the figure are very welcomed
@@Abagone I like to play with my figures so I'm out of luck. I have the first Bloodborne hunter bootleg figure and I never dared to try new poses in my diorama because I might break it.
I can understand that. My bootleg broke on me 😅 Never saw a bootleg that got beyond looking like the original at first glance. In hand you notice the difference in quality instantly
Eu estava procurando um vídeo como esse. Pois aqui é caro um boneco original, e estava pensando em pegar o paralelo. Vi que é bem feio, mas com alguns customs da pra deixar melhor que o original. 😂
You can treat him as such but there is the Demons Souls Logo in the upper left corner of the package. The differences in the look are because it is the PS5 Version.
Thanks bro, this was exactly the type of video i was looking for. Liked and subbed
I really appreciate that.
Thank you
Great video! I can't justify paying the expensive pricetag of the genuine so I'll be going for the bootleg version.
Yeah the Price is hefty and honestly all figma are too expensive
I really like your style of video, def watching more
Thank you.
Really appreciate that 😁
Thanks for the upload my friend, I did the same got my figma figure and went to buy the cheaper version just for fun and customization. I know Figma is very expensive but really good quality. Also SH Figurarts released Lord Vyke and that is also a amazing figure for $ 90 at the moment, if you guys are interested.
Thx for the Info my friend.
i already got him 😁
I was happy that Bandai released an Elden Ring figure but found the choice a little Bit odd.
Got him for a bargain too because i think he didnt sell well. Hope they will release other S.H. Figuarts of Souls Games and not just Minis.
Especially wish for a Ranni.
Tbh even at €180 the figma is still worth it imo. If you’re already that into demons souls that you want to get a figure from it you may aswell go for the one that’s drop dead gorgeous
Also what are your thoughts on the upcoming figma raging wolf?
Yes the original beats the copy for sure but just the retailer price is hefty.
If you just now hear that a Figure like this exsist and want to grab it you will pay much more.
So i wanted to show what the differences are and what you get if you opt for the copy.
You get a lot for the 23€ i paid for it. I would have happily spend more to get better quality and maybe it would have been the better purchase between the two.
@@lIlIlIlIllIlalready preordered 😁
@@Abagone awesome!
@@Abagone oh yeah for sure, great review btw, and I can defo see how the bootleg is worth it based on accessories alone or even just to leave in a museum pose.
My figma actually came with a bent broadsword so I wasn't all happy with it lol.
Hello, I have the original figma figure, but its torso so easily to disassemble. May be you know how to fix it?
Hey Vladimir.
Yes the Torso is the greatest weakpoint of the original. It is overengineered and easily falls apart. And the movement range is pretty low.
@5:24 in the Video iam showing the torso. There is no special trick to it.
I place the stick in the upper torso and then push it in the lower half.
When you assembled it dont pull just move. Like i said the range is quite low and if you pull, it just falls apart again.
You can put a little bit of glue in the ball joints to tighten it.
But you really have to be careful what kind of glue to use. To not really glue it permenantly.
Many collectors use Kiki Fix for loose joints. I never used it.
It is polyurethane finish that you can get in a hardware store.
If you coat the ball with it it hardens and so the ball is a little bit bigger for a tighter fit.
I didnt modify anything on the figure.
I would love to see a comparison between the figma lady maria and the bootleg figure
Hey 👋
Nice idea but i didnt got the Lady Maria Figma. I was tempted but right now iam drawing the line at Bloodborne.
Maybe i would have bought them if they released with a little time between Lady Maria and the Hunter.
Both at that time were not feasable and now i got neither 🤷♂️
Thank you for this vídeo!
@rossato2109
Hey !
Thank you for your kind words 😊
How to mount the shield on the back?
There is an adapter piece delivered with the original. It is a clear plastic piece and lays on top of the manual in the shot at 7:05.
Looks like the bootleg doesn't have an adaptor to attach the shield to the back then..
@@richardharris8920yes it is missing on the bootleg
For 20€ I was considering to buy it but those small joints give me ptsd. Besides it's the remakes design anyway. Video was real helpful
Happy to help😁
In my opinion the 20€ are well worth it but dont expect quality.
Just pick a pose and dont fiddle to much with it und you will be fine.
If you collect other figures the weapons that come with the figure are very welcomed
@@Abagone I like to play with my figures so I'm out of luck. I have the first Bloodborne hunter bootleg figure and I never dared to try new poses in my diorama because I might break it.
I can understand that.
My bootleg broke on me 😅
Never saw a bootleg that got beyond looking like the original at first glance. In hand you notice the difference in quality instantly
It actually lookd decent for a biotleg :v
Yeah just the weapons alone are pretty good.
Eu estava procurando um vídeo como esse. Pois aqui é caro um boneco original, e estava pensando em pegar o paralelo.
Vi que é bem feio, mas com alguns customs da pra deixar melhor que o original. 😂
The problem is not the look but all the joints. Be careful not to damage the fake
It's the character for dark souls not demon souls
You can treat him as such but there is the Demons Souls Logo in the upper left corner of the package.
The differences in the look are because it is the PS5 Version.
no
This is just incorrect dude.
Google search Demons Souls PS5