Thank you for this revue and leaving the link for the silicone oil! Earned a new sub 🙏🏾 I’m waiting for my Buu to arrive from Omnime, currently in shipment. I legit said the moment he arrives in dipping him in hot HOT water for 10min, but I might double up and also oil him up after the hot tub dip Hoping to get him to that SHF smooth movement. Granted I’ll be leaving him in some poses for a while so it might go back to that tightness but I’m not trippin too much Honestly jut glad to have a poseable kids buu after like 20 years of having DB figures
No problem at all.. I know we all want our figures to be smooth and not brake on us. And hell yea, you will like it when it finally gets delivered, it’s worth the wait.. especially after so many years hahah we finally get to add him to the shelf 🤙🤙
Hey I saw this trick on another video cuz you don’t need nearly that much oil. Straighten a paper clip out. Put a drop of oil on a plate and dip the paper clip in the oil. Then you can get the oil wherever you need it and you’ll use like 1/10 of what you’re using and it won’t ooze out days later.
Hey quick question here: the peg in the ki blast holding hand broke off do you think it should be super glued back in or try to heat it up and push it in back in the hand
Why would people complain that he's small when frieza is even smaller than him? DId people complain about the SHF Frieza's size? He's actually TOO BIG! Frieza's listed at 5'2 for his Final Form, and Kid Buu was 4'9. Here in the size comparison, he's taller than Frieza...
I ordered off of omnieme to and I haven’t even gotten a shipping notification? Has everyone who ordered gotten their figure? Please lmk I bought over 200$+ stuff on there and haven’t gotten anything yet?
That’s a tough one. That sounds like the same issue that the Shf trunks boy from future had.. if a piece of clear plastic(like the one that comes on the figures) can be cut then put in between the peg and peg hole to create a buffer.. if that doesn’t work then I’m not sure
its not. I bought him and he sucks in some parts. Super limited articulation, the figure had some qc issue where it looked like they rushed it and had flakes of the plastic coming off, the energy ball effects didnt attach right either they kept popping off. Dont get me wrong it certainly looks good but it isnt practical.
Hey man I hope you are well When I got my copy of this kid buu figure one of the problems I have faced is not that the joints were too tight but the hand can't fit on the hand peg because the hole in the hand is to small for the hand peg to fit in. If you have some tips on how I should fix this issue please let me know I would appreciate it alot also nice vid I subbed :)
I prefer this color scheme. I've seen someone who puts the hands and torso of this figure with the gauntlets and pants of the other figure. That combo looks nice too
Thank you for this revue and leaving the link for the silicone oil!
Earned a new sub 🙏🏾
I’m waiting for my Buu to arrive from Omnime, currently in shipment.
I legit said the moment he arrives in dipping him in hot HOT water for 10min, but I might double up and also oil him up after the hot tub dip
Hoping to get him to that SHF smooth movement.
Granted I’ll be leaving him in some poses for a while so it might go back to that tightness but I’m not trippin too much
Honestly jut glad to have a poseable kids buu after like 20 years of having DB figures
No problem at all.. I know we all want our figures to be smooth and not brake on us. And hell yea, you will like it when it finally gets delivered, it’s worth the wait.. especially after so many years hahah we finally get to add him to the shelf 🤙🤙
Hey I saw this trick on another video cuz you don’t need nearly that much oil. Straighten a paper clip out. Put a drop of oil on a plate and dip the paper clip in the oil. Then you can get the oil wherever you need it and you’ll use like 1/10 of what you’re using and it won’t ooze out days later.
Very true. Thank you for that, it really doesn’t take much at all. I usually don’t use that much but can’t really be as precise while recording lol
add -ah-less-ent lol awsome review bro
@@jasonpatchen1912 😂😂😂 thank you 🤙
i preorded mine, should be here soon wooo
Nice!! You will like it 🤙🤙
Ordered off Omnime as well. Last year even. Still have t received my order of A&B Kid Buu 😞
That’s crazy man smh. But at least when you finally get them it will be worth it
I’m still waiting on my Trunks to ship seeing this might have to cop when he’s available again
Omnime is playing games smh.. Aliexpress from now on with 3rd party buys
@@DbZFigureAddicT that sucks to hear I’ve been looking forward to my preorder for a while and keep seeing everyone receive theirs already smh
Same for me smh.. got this kid buu super late. I ordered trunks from aliexpress and got it all early lol
Hey quick question here: the peg in the ki blast holding hand broke off do you think it should be super glued back in or try to heat it up and push it in back in the hand
Try epoxy glue for plastic 🤙
@ ok thanks 🙏
makes me think of a genie in a bottle
@@jasonpatchen1912 right haha
mine came with the right gauntlet loose and it wont pop back in 😞
A lot of qc with these guys unfortunately
i have both hes just more saturated pink like big league chew
Nice! ah I see lol super saturated then
nice
Super dope figure 🤙🤙
the knees actually has good motion you just have to push it
They do.. realized after messing with it haha thank you 🤙🤙
Why would people complain that he's small when frieza is even smaller than him? DId people complain about the SHF Frieza's size? He's actually TOO BIG! Frieza's listed at 5'2 for his Final Form, and Kid Buu was 4'9. Here in the size comparison, he's taller than Frieza...
Very true
I ordered off of omnieme to and I haven’t even gotten a shipping notification? Has everyone who ordered gotten their figure? Please lmk I bought over 200$+ stuff on there and haven’t gotten anything yet?
They are just super late smh..
They said they should be finish shipping by the end of September.There hella late 🤦🏾♂️
@@swaveblossom1026 they are fareals smh
Hope you got yours. I finally just got mine delivered today, so yeah, they just ran super late, but everyone should be getting it.
The bicep of mine fell off the shoulder and the hole is too big to snap back in to stay. How do you suggest I get it to stay in.
That’s a tough one. That sounds like the same issue that the Shf trunks boy from future had.. if a piece of clear plastic(like the one that comes on the figures) can be cut then put in between the peg and peg hole to create a buffer.. if that doesn’t work then I’m not sure
@@DbZFigureAddicT thanks. Great idea. I was going to spray just the peg with a clear coat to try and thicken it
i really think this guy is going to outshine anything tamashi comes out with but i could be wrong idk
@@joeysideways possibly their trunks was already better also
its not. I bought him and he sucks in some parts. Super limited articulation, the figure had some qc issue where it looked like they rushed it and had flakes of the plastic coming off, the energy ball effects didnt attach right either they kept popping off. Dont get me wrong it certainly looks good but it isnt practical.
Hey man I hope you are well
When I got my copy of this kid buu figure one of the problems I have faced is not that the joints were too tight but the hand can't fit on the hand peg because the hole in the hand is to small for the hand peg to fit in. If you have some tips on how I should fix this issue please let me know I would appreciate it alot also nice vid I subbed :)
Hello hope all is well also. Use hot water on the hands or warm up with a heat gun to soften the plastic
@@DbZFigureAddicT thank you so much man 👍
@ no problem
Do you recommend heating these up when we get them out of package or should we use the oil for the joints instead?
One or the other works.. i prefer the oil.. but you might be ok with dipping in hot water. They both will save your joints
@ thanks for replying brother. Ive been really enjoying your videos, I just bought my first few third party figures. I hope they live up to the hype!
@ no problem! They’ll live up for sure🤙🤙
@ just an update, they surely did live up! Thanks for putting me onto them and us giving your review on these bro!
@@Hueyfreeman95 Nice! No problem! 🤙
you can tuck his bottom of his pants to get a full 90 degree bend at the knee
@@jasonpatchen1912 I’ll have to try that.. I was assuming it had more bend
Kid buu is smaller than Krillian I think or around same size it’s accurate to the character
Hell yea
When did you get this in? Was it from omnime?
Just got it yesterday smh. Yea from omnime all late lol
@@DbZFigureAddicT I lost my email with my omni orders but glad you got yours, I should have mine soon the
how do I deal with cleaning off the excess oil?
I use a micro fiber towel
Does body oil also works ?
Possibly lol
Hot take this version is better than the other kid buu
I prefer this color scheme. I've seen someone who puts the hands and torso of this figure with the gauntlets and pants of the other figure. That combo looks nice too
Everyone prefers this version I seen, mainly due to the light pink and Gold contrast
I agree
I think that’s where they got us. Maybe the other version color is closer to the sh figuarts color haha
Hell yea.. that’s what made my choice also
How tall is he
@@michaeldonald3851 I didn’t measure.. but I made a height comparison in this video and another short video with more comparisons if that helps 🤙
Are you ok? You seem quite shaky
Yes🤙🤙