No as you can see from tons of past videos and mentioning in this video, we have used KW on many of our Project Vehicles because we believe in this product.
We’re you able to maintain the factory camber? If not, how much did it change and was the car different in its handling? I ask because I lowered my Honda civic SI 2022 and the steering was way oversensitive almost as if the steering was “over caffeinated“ jittery the car became unpleasurable to drive thanks in advance for your response. Great video BTW
2 questions, and I realize this video is 2 years old. 1. Is there something special about these springs that they won't wear out the factory shocks as do all other lowering springs? 2. What were your alignment specs?
Great questions and still relevant. Lowering springs and wearing out shocks is always a topic. But that would be if you had that car from new to 100000 miles probably. Most of us keep a car for 20000-50000 miles so its not really a concern. The KW is a perfect upgrade because it retains the factory electronic dampening and lets you set the ride height. So based upon the height you set will determine that shock stroke which is what "could" premature wear out shocks. Alignment we always do as close to factory as possible for street cars.
@@MrLaonation If you RUclips is a customer service channel, there is no order under Skinny P. But yes we have 100 employees with a large customer service department, sales team, and marketing team. We try our best to assist everyone as quick as possible but cannot beat Bezos time and his billion dollar company.
Well no order on REDX. RUclips is not a customer service portal. NRG is always back ordered on seats along with the pandemic and 100 ships sitting at the LA Port. Now this was all told to you most likely and is in the order notes. So if we are a joke, provide us with your order number and we will cancel so you can wait somewhere else and call them names. Maybe try Amazon and you will get them by 10pm 🤷🏼♂️
Great video. Curious about your relationship w/ KW. Were you guys compensated by them to produce this content?
No as you can see from tons of past videos and mentioning in this video, we have used KW on many of our Project Vehicles because we believe in this product.
We’re you able to maintain the factory camber? If not, how much did it change and was the car different in its handling? I ask because I lowered my Honda civic SI 2022 and the steering was way oversensitive almost as if the steering was “over caffeinated“ jittery the car became unpleasurable to drive thanks in advance for your response. Great video BTW
You may just need to get it aligned or get supporting mods based on how low you went.
2 questions, and I realize this video is 2 years old. 1. Is there something special about these springs that they won't wear out the factory shocks as do all other lowering springs? 2. What were your alignment specs?
Great questions and still relevant. Lowering springs and wearing out shocks is always a topic. But that would be if you had that car from new to 100000 miles probably. Most of us keep a car for 20000-50000 miles so its not really a concern. The KW is a perfect upgrade because it retains the factory electronic dampening and lets you set the ride height. So based upon the height you set will determine that shock stroke which is what "could" premature wear out shocks.
Alignment we always do as close to factory as possible for street cars.
My MT G80 arrives in a couple of weeks! Pretty stoked, looking for parts.
Update: The car is FANTASTIC
Dan the Man! You look great, it's been awhile.
Shouldn't you have waited for the springs to settle before alignment?
Yes, the alignment sequence was shot a day after the install. Thanks for watching!
Once you set the ride height and align it…let’s say 2 months later you want to raise it, do you need to realign it?
Technically yes if you raise it enough to affect the geometry
What is range of ground clearance with this suspension
What were the height setups for the KWs on this video
Did you use Spacers?
Is it worth noting the rear spring appears to be upside down ?
The pigtail should be in the lca and flat edge on the perch
Thank you for pointing that out to us!
@@vivid_racing whatttttt
How busy are u guy why does the call keep going quiet when I wanna see my order updates
I didnt know you can see your order updates via phone? But if you email, call, use live chat, one of our many reps can help you.
@@vivid_racing oh ur fast to respond to RUclips but not emails or phone calls lmao cmon get it together
@@MrLaonation If you RUclips is a customer service channel, there is no order under Skinny P. But yes we have 100 employees with a large customer service department, sales team, and marketing team. We try our best to assist everyone as quick as possible but cannot beat Bezos time and his billion dollar company.
Bro, you should work out your customer service. I ordered my steering wheel 3 weeks ago and no news about the shipmet.
Thanks I’m not only one
Did u use spacers and if u did what size?
No spacers were used. Thanks for watching!
@@vivid_racing thank you for reply - was looking for this answer before I lower my G80, still looks great!
What is the ride height for this set up? (Stock was 5")
3"
Where are my Nrg seats been waiting 5 weeks since I bought them. This is crazy. 800$ seats and nothing lol vivid racing you guys are a joke.
Well no order on REDX. RUclips is not a customer service portal. NRG is always back ordered on seats along with the pandemic and 100 ships sitting at the LA Port. Now this was all told to you most likely and is in the order notes. So if we are a joke, provide us with your order number and we will cancel so you can wait somewhere else and call them names. Maybe try Amazon and you will get them by 10pm 🤷🏼♂️
@@vivid_racing cancel mine too. canceling my order is taking too long too poor. No good racing
Can’t get past that face