Fcking love watching Sean's review vids. I am 16 years old and I did my first decent taper on myself with nova clippers a week ago, but I do really look forward to trying these out. Really inspired me to start this barber journey and keep up the amazing content. Simple & entertaining, 10/10 fs.
@seancutshair you can make the Candy go up to 8000 RPM’s by soldering a small gauge wire (inside phone charger cable). You solder K2 to M-. You’ll see on the left side of the motherboard. Enjoy!
Perfect set up for the home barbers or beginner barbers. The trimmer is a must for zero gap. The trimmer is not good for coarse or thick hair so it cannot debulk for just thick hair. It bogs down a lot. It's perfect for kids and people with sensitive skin. I use it mainly for taking out the zero line and kids.
Love your reviews and have been watching to determine which set up to get. I think I am going to go with the bundle, the Yeti and the troll trimmer. Thanks Sean
Great Video Sean! I have a set of the Slime 1's Black Ghost Trimmer and Reaper. As for the price, I can't complain they get the job done. Might order another set thanks to this video! The mini Skulls are basically an Uno which I love!
love the clipper. Blends super quick and easy, debulks great, and is super light super powerful and smooth. My only issue with it is you need 2 of them because the blade gets hot really fast like within 5minutes. I cut fast and i cant use it for the whole fade because of that. Its inexpensive so buying two will still be cheaper than buying 1 of the new main branded clipper companies'. So its not the end of the world getting 2.
@Mar Z Nah not even spraying clipper spray cools it down enough. It will cool it down enough for like a minute or so and then be too hot again. The only thing that works is doing the skin to the half first so the blade is at its coolest doing that. then when it gets hot you have guards on it so its fine. Then spray cool care if you need to detail with no guard for a little bit.
Should try and just kissing the edge of trimmer for the hard part, barely visible then hit it with the razor, will make it so it’s not so big and wide, will make it look more thin and crisp
Man forget the clippers...That boy niiiccee!! Clicked this vid for a quick clipper review and watched it completely to see how that fade was gonna look without his usual "tools" but Dude just made it look easy👍🏽👍🏽
@@Seancutshair thank you for the clarification. So you can still get a nice skin fade with a taper blade? I have a Babyliss ( just bought another one because I like that brand) and it doesn't snag as much as my caliber.
Love using my uno shaver in tight spots, especially above the mustache. It really is crazy how other companies are able to rebrand the gamma/stylecraft stuff
Thanks for making this review. I was curious how good the clippers and brand is. I am a hairstylist looking for quality 2nd pair so good to know how well it works
Brotha! So im a beginner gonna try and cut my hair. would you say go ahead and get this set already instead of buying something cheaper then buying something more expensive down the line. Would appreciate your advice.
I just bought the slime 2 for this same purpose. I cut my own hair once a week (blade closed no guard, buzz cut) and my son's hair every 2 weeks, (1/16 guard buzz cut) I've cut my own hair for a long time and have been through many clippers. (Usually the Walmart wahl clippers.) I've only had these a few weeks, 3 cuts for me, one for my son and they have been great so far. I haven't had them long, but I can post an update in a few months. For $54 on Amazon, I'm happy with my purchase. Time will tell if they last.
i wouldnt say its like a magic clip. It blends like the magic clip but it definitely cuts through bulk way cleaner and smoother than a magic clip. its like a cross between magic clip and senior
@@8_nj11 Yeah its worth it cause you getting a good solid clipper for like 90 dollars pretty much. It will last you a while until you get another one or invest in something better.
@@Seancutshairwhat’s the difference between blades ? someone told me if i want blurry taper/fades to get a fade blade. i’m using a comb blade rn it came with the clipper
Hi lacey just checked your order and it's cos of the Slime 2 (it was pre order scheduled to ship Friday 2nd) it's now been shipped with full tracking! thank you for your support
@@soloninja6215 yeah they work pretty good for the price. I zero gapped my trimmers and I think I’m gonna do the same thing to the clippers. I just needed sumn to get my started.
Anyone know if the regular uno’s hit like that? I hear people say they’re good for shaving beards and mustaches… but I’m looking for a foil shaver and I just need to know if they’ll take down the hair on a bald fade sufficiently
What’s the best tpob bundle to get the gold pack or the slim one as I am looking for new clippers and trimmers barber for 9 year just looking for something different
I ordered the slime 2 set on Amazon but I noticed that it said the it only had 1,2,3,4 guards and I was wondering if you knew any 1/2 guards that were cheap that would fit the clippers on Amazon im trying pretty new to this so it would mean a lot if you could help me out
If it's only 4 clicks. Which would be half open/close 🤔.... I don't like that as a beginner. Hard pass for me.... you answered my question. There is no half open click lever. Still a hard pass for me
the 4 clicks is perfect. Personally i never use all 5 clicks on any of my clippers. Its always open, halfway, quarter sometimes, and closed. Thats it. The 3rd notch is halfway open on this clipper 2nd is quarter and 1st is closed. Its the same thing he just took out the 4th notch cause its not necessary at all
Okay whatever dude go check the massage you send me first and see how rude you was . Hey Sean much respect for you brother keep up the good work God bless 💪🙏💈❤️
@@Seancutshair ...i know, right! ...i will confess, i do run a fade blade on my 2 jrl 2020s, but its because i only use that perticular style of clipper for flat tops (& believe it or not, i cut alot of em!) because it give a "flat" surface, & part of why i love the 2020s fof that is that theyre light & u can hold em like a giant pencil & those jrl blades just do not get hot... but other than that, i personally wish i could put the wahl magic staggertooth blade on every dang thing in the arsenal! (haha) ...thank u sir
@@THEPISSEDOFFBARBER thank u for the info sir, that sounds good ...& i just checked out ur website & looks like uve got some cool stuff... but i will ask, any chance on a 5 inch shear? ...after 30 yrs in the buisness, i fully understand im the "odd ball" in that i prefer a short 4.5 or 5" blade, but i didnt figure it would hurt to at least ask? thank u sir
Tank what you think of a barber charging $70 a cut for “ quality” while promoting these clippers as being better than Gama 🫣😂 s/o to you real barbers who keep it 💯 with your followers
Fcking love watching Sean's review vids. I am 16 years old and I did my first decent taper on myself with nova clippers a week ago, but I do really look forward to trying these out. Really inspired me to start this barber journey and keep up the amazing content. Simple & entertaining, 10/10 fs.
Appreciate it 👊🏼
That's good bro I been cutting hair for 4 years an I love it an it's the easiest money I ever made
Good review bro @Seancutshair
@seancutshair you can make the Candy go up to 8000 RPM’s by soldering a small gauge wire (inside phone charger cable). You solder K2 to M-. You’ll see on the left side of the motherboard. Enjoy!
Interesting 🤔
Perfect set up for the home barbers or beginner barbers. The trimmer is a must for zero gap. The trimmer is not good for coarse or thick hair so it cannot debulk for just thick hair. It bogs down a lot. It's perfect for kids and people with sensitive skin. I use it mainly for taking out the zero line and kids.
👌🏻👌🏻👌🏻
I think they HELLA GOOD but i have the goldfx blade on em
@MHSZN Did you have to buy any mods for it or can it do a straight blade swap?
What mods can you make to the clipper?
@@nhiathor8155wondering the same thing
Glad I found this channel just started my barbering journey!
Ur killing it bro. The videos are LIT 🔥
Thanks my guy 🙏🏼
Love your reviews and have been watching to determine which set up to get. I think I am going to go with the bundle, the Yeti and the troll trimmer. Thanks Sean
That’s a solid setup 👌🏻
This looks like a nice inexpensive combo to take in the road with you, looking forward to your review
Coming soon!
@@Seancutshair already turned on the notification!
Great Video Sean! I have a set of the Slime 1's Black Ghost Trimmer and Reaper. As for the price, I can't complain they get the job done. Might order another set thanks to this video! The mini Skulls are basically an Uno which I love!
Yessir! Mini skull is solid
Thinking of buying these this week they look good
They’re solid for the price
@@Seancutshair Yeah they look solid trying to build up my collection
love the clipper. Blends super quick and easy, debulks great, and is super light super powerful and smooth. My only issue with it is you need 2 of them because the blade gets hot really fast like within 5minutes. I cut fast and i cant use it for the whole fade because of that. Its inexpensive so buying two will still be cheaper than buying 1 of the new main branded clipper companies'. So its not the end of the world getting 2.
Yeah definitely still cheap even for 2!
Wahl clipper spray and all set
@Mar Z Nah not even spraying clipper spray cools it down enough. It will cool it down enough for like a minute or so and then be too hot again. The only thing that works is doing the skin to the half first so the blade is at its coolest doing that. then when it gets hot you have guards on it so its fine. Then spray cool care if you need to detail with no guard for a little bit.
@@Mike-hy8cs get ceramic cutter blade
@John Cruz Might have to see if that makes a difference. Havent tried that yet.
that color is crazy 🔥🔥
That slime ✅
Trimmer 7,000 rpm, dlc blade, and special paint. Remind me of the supreme and 4mas trimmer. I only paid $24 for TPOB trimmer from Amazon
Nice 👍🏻👍🏻👍🏻
Should try and just kissing the edge of trimmer for the hard part, barely visible then hit it with the razor, will make it so it’s not so big and wide, will make it look more thin and crisp
I don’t like using razors on parts if I don’t have to
@@Seancutshair I feel you, I’m same way with the trimmers.
You gained a new fan brother all the way from PA-610💯💪🔥❤️ keep on killing it brotha!
Thank you! I will!
Man forget the clippers...That boy niiiccee!! Clicked this vid for a quick clipper review and watched it completely to see how that fade was gonna look without his usual "tools" but Dude just made it look easy👍🏽👍🏽
Not bad. Like the green, looks good. Thx for the video Sean 👊🏾
Yeah they’re pretty sharp green
It's amazing how you can get his for way less then the other guys.
Yeah a fraction of the price
Hey! I'm a cosmetologist that has transitioned into a barbershop the last 6 months. Can I ask why you prefer the taper blade to the fade blade?
The taper blade is more forgiving and cuts softer. The fade blade also snags skin sometimes which I hate
@@Seancutshair thank you for the clarification. So you can still get a nice skin fade with a taper blade? I have a Babyliss ( just bought another one because I like that brand) and it doesn't snag as much as my caliber.
Would you recommend this for someone looking to start cutting hair
Yeah it’s a perfect beginner bundle
Does it heat up fast ? Can I whole a line and fader with it all at once? @@Seancutshair
You should make a review on the caliber .50 Cal MAG clippers, I hear its great for detailing.
I’ve tried to get them to send me stuff but no luck!
Love using my uno shaver in tight spots, especially above the mustache. It really is crazy how other companies are able to rebrand the gamma/stylecraft stuff
Gamma rebrands their tools
Yeah idk the details but definitely interesting
Come on Sean you know bro tell us the secret lol
There’s a 20 dollar copy of the uno on Amazon hits the same.
@@BA99253 do you know what it’s branded as
Thanks for making this review. I was curious how good the clippers and brand is. I am a hairstylist looking for quality 2nd pair so good to know how well it works
Did these come with a 0.5 guard?
What would you recommend to be the quietest clipper on the market?
New fx one fx, lithium fx
Brotha! So im a beginner gonna try and cut my hair. would you say go ahead and get this set already instead of buying something cheaper then buying something more expensive down the line. Would appreciate your advice.
I just bought the slime 2 for this same purpose. I cut my own hair once a week (blade closed no guard, buzz cut) and my son's hair every 2 weeks, (1/16 guard buzz cut) I've cut my own hair for a long time and have been through many clippers. (Usually the Walmart wahl clippers.) I've only had these a few weeks, 3 cuts for me, one for my son and they have been great so far. I haven't had them long, but I can post an update in a few months. For $54 on Amazon, I'm happy with my purchase. Time will tell if they last.
Should I keep my Style craft alpha or buy this clipper TPOB
Both about the same level
Should i buy a trimmer and clipper set from Babyliss and sell my senior? Or sell my BaBylissPRO lithium fx clipper?
Better than a magic clip i like the notches more efficient
They’re similar no doubt
The trimmer looks a lot like the supreme trimmer. I'd like to know if the parts are interchangeable..
Never seen the supreme it might be close
i wouldnt say its like a magic clip. It blends like the magic clip but it definitely cuts through bulk way cleaner and smoother than a magic clip. its like a cross between magic clip and senior
I just meant the clipper shape itself
@@Seancutshair Yeah and the weight too haha
do u recommend buying it now is worth it or nah?
@@8_nj11 Yeah its worth it cause you getting a good solid clipper for like 90 dollars pretty much. It will last you a while until you get another one or invest in something better.
Is a 5 lever clipper way too different than a 4 lever clipper if yeah can you explain please thanks
4 means there’s no middle. Most have 5 clicks
@@Seancutshair if I get a 0.5 guard it would be like a 5 lever clipper correct?
@@JXPlayer no that has nothing to do with the lever
@@Seancutshair oh okay but you could still do a fresh taper with the 4 lever right
One question why you don’t like the fade blade the Clipper comes with?
Just preference. I’ve never cared for any fade blades always swap them out
@@Seancutshair ohh okay I taught it was like a big deal (Thanks for Answering)
I wonder if the tomb45 eco battery and powerclip fit!?? Since it looks like a Walh senior.
I’m not sure it is pretty close
What is the clipper equivalent to?
Maybe similar to a magic clip 🤷🏻♂️
@@Seancutshairwahls magic clip ?
Look Kool but I like my free float lever but a fade that came out clean with a clipper that was 50 bucks not bad at all
I agree completely 👊🏼
Will you be reviewing the TPOB Goblin Clipper And Trimmer?
Yes soon!!!
Can you still do a taper with a fade blade on tpob?
What other guards would fit these?
Everything Wahl, jrl, Babyliss
what modifications would you do on them to really contend?
Idk the lever was my biggest complaint would have to take the notches off
Hi im planning to replace the blade with a taper what do you recommend? thanks😊😊
Any of the main brand taper blades would work
@@Seancutshairoh nice thanks for the response
Hey do you have a discount code from them? Looking to buy the foil shaver from Amazon. Thanks
Not for Amazon only on the website
Great tutorial dude 🤘
Glad you liked it!
is this a good beginner set?
Yes
How do they compare to whal seniors?
Definitely closer to magic clips than seniors
@@Seancutshair how is the machete compared to the whal seniors?
No clipper over comb?? Only clipper guards?
Can you convert a taper blade to these clippers and how if so?
Yeah blades are easily interchangeable
@@Seancutshairwhat’s the difference between blades ? someone told me if i want blurry taper/fades to get a fade blade. i’m using a comb blade rn it came with the clipper
Thanks Sean cool video as always appreciate you bro !!
Appreciate you! Not a problem!
Why is a barber in Oregon charging $70 a cut talking bout quality while using wholesale Ali Express clippers. You know who your man is TPOB 😂😭
Why are you on anonymous youtube account dissing people who are doing better than you? Loser lol
I'd like to see if I can put a tomb battery on it
Is the reaper better than slime
How much?
How comparable to the wahl seniors are they ? I know you said magic clips but the body and specs resemble the seniors too much for me not to ask
Close but not quite the quality. The shape and feel is the same though
I ordered from them and it's been 3 days with no confirmation or anything just an email from PayPal with the reciept what should I do
Busy time of year I’d give it a few days and see
Hi lacey just checked your order and it's cos of the Slime 2 (it was pre order scheduled to ship Friday 2nd) it's now been shipped with full tracking! thank you for your support
@TPOB - The Pissed Off Barber is there a reason that my clippers act like there's not enough power to cut with?
What would you recommend for beards?
What blade you recommend using on the slime 2 clippers
Never tried anything other than what came on it
Did it come with magnet guards? It says that it did on Amazon don’t see any in ur video ? 🤷🏾♂️
These didn’t but it was long ago
I just bought this set man so thanks for the review.
Hope you enjoy it!
Is it working well please reply
Where you buy the same set?
amazona
@@soloninja6215 yeah they work pretty good for the price. I zero gapped my trimmers and I think I’m gonna do the same thing to the clippers. I just needed sumn to get my started.
can the fade blade be used on the goblin clipper?
I would imagine
Did the TPOB clippers & trimmers get hot after cutting for a long time?
Not too hot but the usual heat that most get
What’s a good taper blade for it to change?
i was looking into theses or the boosted but the boosted are never available
Boosted and rebels are hard to get right now
The alphas are the closest thing to the rebels. You can get the upgraded motor for the alphas and it's pretty much a rebel.
Did these come with the 1/2 guard ? I was looking on Amazon and it only includes 1,2,3,4 guards !
Yeah I don’t remember. Would have said in the video
Good for wahl guards?
Yeah they’ll fit
They all cut pretty DARN good!
Definitely not too shabby
Anyone know if the regular uno’s hit like that? I hear people say they’re good for shaving beards and mustaches… but I’m looking for a foil shaver and I just need to know if they’ll take down the hair on a bald fade sufficiently
The uno is solid but this thing surprised me with the crunch!
The unos hit hard
They come with two blades the darker one is a crunchy blade
Can you put a gamma blade without a mod or do you know what blade swap can fit it without a mod
Yeah it should fit all those blades
Thx you sir for your time to respond back many blessings to your success
Where do I get one
Thepissedoffbarber.com or amazon
No zero gap. Nice clipper though
👌🏻👌🏻👌🏻 I don’t zero my clippers though so not a problem for me
What’s the best tpob bundle to get the gold pack or the slim one as I am looking for new clippers and trimmers barber for 9 year just looking for something different
I would recommend the machete and the demon
@@Seancutshair I have decided on the troll clipper and trimmer after reviewing all your videos mate hope I have decided well 😂
@@ryanrobson149they valid?
I ordered the slime 2 set on Amazon but I noticed that it said the it only had 1,2,3,4 guards and I was wondering if you knew any 1/2 guards that were cheap that would fit the clippers on Amazon im trying pretty new to this so it would mean a lot if you could help me out
Yeah just search .5 guard. There should be tons
@@Seancutshair do all guards fit all clippers?
Are these a good first pair for a beginning barber?
They coo for 40$ witt warranty on Amazon
Its is good or not ????
Price and how this clippers works is awesome
💯💯💯
Would you recommend these if i just starting? or would you recommend something else.
If you can afford a step up I would spend a little bit more
On what if you don’t mind me asking?
Singapore brand?
🤷🏻♂️🤷🏻♂️🤷🏻♂️
Can u put a stretch brackey on these clippers
Possibly i'm not sure though
Do they overheat pretty fast?
Wouldn’t say they overheat but they heat up for sure
What does the trimers remind you of ?The comments are rated R
Maybe Pg-13 come on 😂
I like it. And love the price
Yes it’s a good deal
Anyone know if we are able to stop wahl part onto it? Blade bracket levers
I would imagine so. Definitely the blade if not the other two
How much sir
$135 for the bundle
The clippers r a Lil loud
Make sure to keep them oiled and adjusted correctly
the shaver looks like a uno
It’s similar
In your opinion what is the best trimmers for lineups to give a nice sharp look to the haircut?
Can’t go wrong with any of the skeletons from Babyliss. I’ve been liking the saber lately as well
If it's only 4 clicks. Which would be half open/close 🤔.... I don't like that as a beginner. Hard pass for me.... you answered my question. There is no half open click lever. Still a hard pass for me
Yeah threw me off big time
the 4 clicks is perfect. Personally i never use all 5 clicks on any of my clippers. Its always open, halfway, quarter sometimes, and closed. Thats it. The 3rd notch is halfway open on this clipper 2nd is quarter and 1st is closed. Its the same thing he just took out the 4th notch cause its not necessary at all
Do wahl guards fit on this?
Yes they do
TPOB got a deal with stylecraft or gamma for sure these things are the same exact clippers 😂
The shaver definitely is
Can they use wahl blades and guards?
Yes
I like the tools but I don’t like the owner he is very rude . Good job brother 💪
Just gotta take his jokes and laugh lol he’s funny
I text him last week and he is answer was very disrespectful
Alot of people confuse being real and direct with disrespect
Okay whatever dude go check the massage you send me first and see how rude you was . Hey Sean much respect for you brother keep up the good work God bless 💪🙏💈❤️
Yeah you asked me to send you clippers to make a video with, I said no cos your videos are really bad. Ask again when you improve
Clean cut
🙏🏼🙏🏼🙏🏼
Was I hearing things or was that 3rd notch just sound roughhhhhh
😳😳😳
110 Marcelle Mount
I wish you can giveaways the old ones
When I do giveaways I get too many scammers
Wow thank for the reply man I’ve been studying barber in most of your videos. More ❤️ I’m from Philippines 🤝
i feel ur pain on every dang clipper on the market coming with the fade blade bro!
What the hell!
@@Seancutshair ...i know, right! ...i will confess, i do run a fade blade on my 2 jrl 2020s, but its because i only use that perticular style of clipper for flat tops (& believe it or not, i cut alot of em!) because it give a "flat" surface, & part of why i love the 2020s fof that is that theyre light & u can hold em like a giant pencil & those jrl blades just do not get hot... but other than that, i personally wish i could put the wahl magic staggertooth blade on every dang thing in the arsenal! (haha) ...thank u sir
our next edition of this clipper the 'candy' will have a titanium taper blade, should be out January on amazon!
@@THEPISSEDOFFBARBER thank u for the info sir, that sounds good ...& i just checked out ur website & looks like uve got some cool stuff... but i will ask, any chance on a 5 inch shear? ...after 30 yrs in the buisness, i fully understand im the "odd ball" in that i prefer a short 4.5 or 5" blade, but i didnt figure it would hurt to at least ask? thank u sir
5.5 will be restocked this weekend but thats smallest we have for now
Yeah i like beingnin the middle. But over all looks nice. I dont like the green. I got a amazon set over all nice.
👍🏻👍🏻👍🏻
1min to go 🎉
🙌🏻🙌🏻🙌🏻
🤔
Slimey
Tank what you think of a barber charging $70 a cut for “ quality” while promoting these clippers as being better than Gama 🫣😂 s/o to you real barbers who keep it 💯 with your followers
I wish to have like that🥺
Amazon!
Carroll Neck
Nice.
Thanks!
Had the slimes for a month before they shit themselves.
Damn! What happened to them?
@Seancutshair they just fried, I tried to replace the guts but nothing matched up
this all clipper is replica from WMAR:PPP
Alright 👌🏻
Im a new barber, can I have them😂
Yeah they’re on the way 😜
@@Seancutshair I wish😏
@@Seancutshair I could really use them my clippers suck
@@Seancutshair I can show you my clients haircut if you wanna rate it?