EXCELLENT! You're a natural instructor. Everything we need to know, what to avoid, where to find, how to do, all at the right pace. Thank you, thank you, thank you.
Thank you! I worked in Solidworks and with weldments for about 2.5 years but not since 2013. I'm trying to refresh myself on it before an interview. This was perfect.
Fantastic! Incredibly informative. Included a TON of great information, especially the little tricks to coax SW to give you what you want. Love the properties tips for BOM description and getting the auto balloons to switch back to the weldment cut list. Learned some things I never knew. Thank you!!
Very helpful, thanks! I thought I was crazy for putting each leg on a table in a separate group in a Structural Member feature, but it looks like that's how it goes. Also good to see that eventually you do have to use trim/extend sometimes if corner treatments don't come out right even after trying different settings on individual corner treatments. Learned about Weldments at a recent SolidWorks User Group meeting. Insanely useful tool for so much more than actual weldments. I think many could be helped by using this feature.
aah, i just got into making soft rn and tNice tutorials is so helpful and your voice is so sootNice tutorialng btw! thanks for tNice tutorials tutorial
About weldments, the only thing I wonder is why it's not available in the assembly? Inside a part, there's a restriction in reusing each of these profiles in another assembly. Plus linking with ERP/SAP becomes critical as well.
This looks so much better than inventor. I have only begun learning inventor but I think I wish I had solidworks instead. Can you give any advice about which is better? I have been drawing in AutoCad Mep for 10 years and used Autocad for over 20 years. I'm just looking for a new software to learn and wondered which is better. Any advice would be much appreciated. Thanks for video.
In my opinion inventor and solidworks are very similar! But in the industries tday they use more solidworks then inventor. Solidworks is much easier to learn then inventor.
ProgressionSupport, So I have just installed Solidworks 2016. On my previous version it was easy and simple to use my weldments profiles. I do understand how load your own profiles or any kind. Now the problem I run into is: When you right click on your tab you see your options: Assemble, Layout, Sketch, Evaluate and so on... And for some reason, and maybe I did something when I first started to use solidworks, it doesn't give me option of adding weldments tab? So I can't use it at all? Am I supposed to do something in setting to be able to use this feature? Or maybe it's my installation was done wrong? Please help help!! Thanks,
This video has been very helpful to me. I'm building a similar table for my shop. Can you point me in the right direction to model a piece of 1/8" steel for the top? I created a plane on the top surface, but I can't seem to locate the table top to the table since it's on a different plane.
What do you think of Autodesk Inventor? I am trying to decide which one to work in. I design lots of models in Maya but would love to see them in this program so I can have the materials, stress points etc...
I know this is gonna sound like a dumb question, but right after you resized your table.. you clicked your mouse and dragged the table into view. How did you move the camera without changing the angle of your camera. I know this is a dumb question, but I just can't figure it out. thanks in advance.
A very good video, I'm just a beginner in SW and I had some issues, in first tab, the pieces description, it did not show anything, it was empty. Does anyone know how to link the information or fix it? Thanks
hi man nice video but if got solidworks 2016 and when i want too ad the folder into the original folder is difficult because the folder layout is different how could i fix this
hey brother can u solve a little problem of mine being a new user iam not able to resolve the issue smart dimension is not giving me option to input my required dimention for example if draw a circle off 200 mm ,i would draw a circle and with the smart dim i will input 200 to make to the size but its not taking me there , all it does gives the actual size of entity and thts it could u solve my issue thanks or anyone else who has a solution fo this pls do respond
ok I think I found a fix. only way to have them join is to click one point, hold down ctrl and click the next point then click MERGE on the left side panel under 'add relations' this seems to work fine for me but I think its a bug that hasn't been fixed in later versions of sw2016-2020
I'm trying to open it up as I type tNice tutorials. I'm lost right now and my opening screen looks notNice tutorialng like Nice tutorials. Can anyone help?
Did you make sure to go into 3D sketch instead of regular sketch? I made the same mistake at first. If you press the arrow underneath the sketch button it will let you select 3D sketch and you use that to switch where you are drawing
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
The amount of mileage out of this 15 minute video is phenomenal. You rock!
EXCELLENT! You're a natural instructor. Everything we need to know, what to avoid, where to find, how to do, all at the right pace. Thank you, thank you, thank you.
If you kept it going till now you have all the respect that I can give
I'm a new student from Tunisia 🇹🇳i found u in instagram and now i'm following you on youtube. nice job thanks you so much
Thank you! I worked in Solidworks and with weldments for about 2.5 years but not since 2013. I'm trying to refresh myself on it before an interview. This was perfect.
Excellent! You're the best tutor have ever listened to in you tube. Helped alot
Exactly what I was looking for. Thanks for the clarity and especially for not assuming that we're all at an advanced level.
Fantastic! Incredibly informative. Included a TON of great information, especially the little tricks to coax SW to give you what you want. Love the properties tips for BOM description and getting the auto balloons to switch back to the weldment cut list. Learned some things I never knew. Thank you!!
THANK YOU!!!! you actually guide your viewers through soft, unlike so videos that rush the whole tNice tutorialng or talk too fast.
WHAT A CHAMP!!!! THANX MADE MY LIFE SO MUCH MORE EASIER.
Thank you so much for all these tutorials bro. So much valuable knowledge
Haven't used SW yet. I was using Frame Generator in Inventor which is similar. Nice tutorial. Thanks for posting.
Amazing, this could've saved me a lot of time over the years. Thank you
Great video and really helpful! I couldn't get a grasp on how the setuper works but it's all clear now.
Excellent, simple but full of information needed.. thank you !!!
Very helpful, thanks! I thought I was crazy for putting each leg on a table in a separate group in a Structural Member feature, but it looks like that's how it goes.
Also good to see that eventually you do have to use trim/extend sometimes if corner treatments don't come out right even after trying different settings on individual corner treatments.
Learned about Weldments at a recent SolidWorks User Group meeting. Insanely useful tool for so much more than actual weldments. I think many could be helped by using this feature.
aah, i just got into making soft rn and tNice tutorials is so helpful and your voice is so sootNice tutorialng btw! thanks for tNice tutorials tutorial
When i select the line at 6:51, it creates a plane and then some square like thing, it looks really weird, How do i fix this?
Thank you your just the right speed and concessive direction
So simple and detailed video, it's now going to help to start working wid softsoft!!
Great video, very helpful and well developed. Thank you. Now, I'm going to go check out your other SolidWorks Vids!
Really nice video to get started in weldments...thank you very much... Keep rocking
You just deserved much more thab "just" over 300k subbers.
What is the tap k ? Which one ????? 1:05
Aweso tutorial bro! I like how you gets down to bus
Excellent lesson. Learned some nice techniques here. Many Thanks !!..
About weldments, the only thing I wonder is why it's not available in the assembly?
Inside a part, there's a restriction in reusing each of these profiles in another assembly.
Plus linking with ERP/SAP becomes critical as well.
This looks so much better than inventor. I have only begun learning inventor but I think I wish I had solidworks instead. Can you give any advice about which is better? I have been drawing in AutoCad Mep for 10 years and used Autocad for over 20 years. I'm just looking for a new software to learn and wondered which is better. Any advice would be much appreciated. Thanks for video.
In my opinion inventor and solidworks are very similar! But in the industries tday they use more solidworks then inventor. Solidworks is much easier to learn then inventor.
Excellent video. Very helpful. Thank you
ProgressionSupport,
So I have just installed Solidworks 2016. On my previous version it was easy and simple to use my weldments profiles. I do understand how load your own profiles or any kind.
Now the problem I run into is: When you right click on your tab you see your options: Assemble, Layout, Sketch, Evaluate and so on... And for some reason, and maybe I did something when I first started to use solidworks, it doesn't give me option of adding weldments tab? So I can't use it at all?
Am I supposed to do something in setting to be able to use this feature? Or maybe it's my installation was done wrong?
Please help help!!
Thanks,
This video has been very helpful to me. I'm building a similar table for my shop. Can you point me in the right direction to model a piece of 1/8" steel for the top? I created a plane on the top surface, but I can't seem to locate the table top to the table since it's on a different plane.
Hi,
at the moment I am designing an overhead crane beam. is it possible to analyse the effect from moving crane on the beam?
Thank you
i couldn't find the weldments profile folder in the English folder do i have to create one ?
In Windows 10 Pro, in the first minute of your video, the tab key does not change the Tri ad.
same happened to me. Did you find how to do it?
How did you convert the cross hair to pencil of your mouse cursor in Solidworks16?
Great video, I don't seem to be able to tab the legs to the front plane, am I missing a setting?
This VDO is cover all necessary thing I want.
Thank you for good tutorial.
What do you think of Autodesk Inventor? I am trying to decide which one to work in.
I design lots of models in Maya but would love to see them in this program so I can have the materials, stress points etc...
I know this is gonna sound like a dumb question, but right after you resized your table.. you clicked your mouse and dragged the table into view. How did you move the camera without changing the angle of your camera. I know this is a dumb question, but I just can't figure it out. thanks in advance.
If tNice tutorials isnt the most true tNice tutorialng ive ever read
is it important to have a 3D sketch?
A very good video, I'm just a beginner in SW and I had some issues, in first tab, the pieces description, it did not show anything, it was empty. Does anyone know how to link the information or fix it? Thanks
Very good tutorial. Got me started right away. Thanks a lot!
anyone know where i can download more weldment profiles? i need smaller tubing
This video was extremely helpful, thank you. :)
hi man nice video but if got solidworks 2016 and when i want too ad the folder into the original folder is difficult because
the folder layout is different how could i fix this
Can you give the each piece an individual part number?
tnxs ,that was lots of help to me.in other words :a complete intro to weldments...
All the way from Mexico City, thanks a lot!!!
how do you get the grid on the plane?
Excellent tutorial! Thanks a million.
I keep coming back to those basics videos because I STILL don't know how to properly use the software. I'm gonna cry
Very good and funny videos bring a great sense of entertainment!
hey brother
can u solve a little problem of mine
being a new user iam not able to resolve the issue
smart dimension is not giving me option to input my required dimention
for example if draw a circle off 200 mm ,i would draw a circle and with the smart dim i will input 200 to make to the size
but its not taking me there , all it does gives the actual size of entity and thts it
could u solve my issue
thanks
or anyone else who has a solution fo this pls do respond
learning too - but dont you just double click the dimension numbers and the edit box appears
I want to learn how to do tNice tutorials but I need equipnt first any recomndations on what I should get or need
Nice job!!!!! Pretty clear explanation!!!!
lmao i was tNice tutorialnking the sa but don't give up! We got tNice tutorials!
@1.55 why i cant snap to a point when i drag the other point
me too is so fustrating i cant find why it wont snap
ok I think I found a fix. only way to have them join is to click one point, hold down ctrl and click the next point then click MERGE on the left side panel under 'add relations' this seems to work fine for me but I think its a bug that hasn't been fixed in later versions of sw2016-2020
That was incredibly helpful. cheers!
I was surprised how understandable tNice tutorials tutorial is, thanks!
Can you pls post command short cuts?
You just unconfused me; thanks!!!
u can share your folder solidworks of table plz??? thanks.
Thanks man! subbed for the instructions!
can you share your library weldment for me? thank's!
THanks for the help. My friend reconded tNice tutorials software and I was very comfused
I love soft soft so so so so much!
dude tNice tutorials is super good! subbed
I'm trying to open it up as I type tNice tutorials. I'm lost right now and my opening screen looks notNice tutorialng like Nice tutorials. Can anyone help?
i push tab on my 2014, but nothing happen....
Did you make sure to go into 3D sketch instead of regular sketch? I made the same mistake at first. If you press the arrow underneath the sketch button it will let you select 3D sketch and you use that to switch where you are drawing
For a new preson it can be a slowed down to 50% if one is not used to the commands.
I would love to get this for my business but it's too expensive
this video helped a lot, thank you
awesome tutorial mate.
resolution is very bad it is not clear what commands you are picking. but your classes are very good you don't realize how fast you are going
Muito bom o seu conteúdo parabéns!!!!!
I need a weldment tutorial for simple frame
That was a very good video tutorial. Thanks
I really thought I was the only one. Like I was buggin'.
i need suzuki grand vitara 2006 3 door car chassis..can u upload the video please
+Hitesh bachchhav here the link...
.İ.
eh artan ty
Hitesh bachchhav np fucktard. keep o2 consuming.
What do u mean by fucktard
?
Change the "Program" from Agressive TE to Analog Base 1 TE inside the GMS setup equlizer panel.. Found another comnt with the
cool. solved my problem. Nice work
Very helpful. Thanks!
Great tutorial! Thanks!
Thank you, I was drawing 2 hours haha
Great tutorial, thanks.
That was great. Thank you.
thanks for your good tutorial
impressive,very well said,tNice tutorials is what I need to learn soft soft,your the bes n
ahh you held down control and the mouse wheel... lol im dumb, great tutorial btw.
Thanks for the help.
Thank you for teach this.
Stay safe everyone
Very helpful, a lot of information.
Awesome!! Helped me alot
Unfortunately, I'm afraid this is not over. You did forget the "Weld Bead," didn't you?
The basics for anyone. Definitely putting tNice tutorials in my notes.
Perfect!
just use sp404 for making soft
Ty it was nice ❤️