Brooo, you're making me appreciate the MR2s so much every time I watch another of your videos. So stoked for you and hope you enjoy the new new lol Can't wait for the wheels, too!!
Turbo suits these way better than a 2ZZ if your 1ZZ isn't fucked. I have an original TTE Turbo which was about 195bhp. Takes my friends 2ZZ conversion to school . Besides the bhp it makes about 50-60lbs more torque .
Love those little MRS they are awesome even better if you put a Turbo in them yeah Keep that boost low don’t want it to blow man my Mazdaspeed protege blew up at 13 psi now is built but I would love to get my hands on one of those Good Job bro Take Care of it and stay Safe
Question, why did you have the fan blowing INTO the radiator? you need to extract the heat, not force it back in! Yes, it sounds stupid, but this is a rear engine car. The radiator fan pushes the air outwards towards the rear! fan should have been placed in one of the side gills that channels air to the fan shroud. Love the project either way, good job!
Thanks! I didn’t set car up on the dyno and i don’t want to tell the tuner what to do because I don’t think that would end well so I thought it would be fine if he just did his thing
Are you running a boost controller? And if so what kind? I have the 1zz turbo kit from monkey wrench. I have the apexi fc, bigger injectors and stage 1 exedy clutch. Going to boost my 2001 Celica GT. I have the greddy profec boost controller but wanted to ask what kind of boost controller you are running if you are?
So around 217WHP @ 7psi? I'm guessing that's the Monkeywrench kit with the log style manifold and 2.5" pipes? How many miles on your motor and is it stock? I've been eyeballing this kit and the other one with the tubular manifold, V band clamps and 3" pipes. Hope your clutch is upgraded too. Looking good. Take care of it.
hey bro fellow MR-S owner here, I really want to turbocharge my factory 1zz (among other things) but I know just by looking at it my engine isn't in a good enough state to handle it, do you know any websites where I can find parts to rebuild the motor? thanks
you start a project like this you might as well as rebuild the 2zz with beefier internals then get a turbo kit plus ecu + tuning it and work out like 100 kinks then you might as well invest in a stage 2 or 3 clutch kit ect easily spending 15k on parts + find someone to do the labor installing it and/ find the time to do it yourself and then after all that if you live in california hope it passes smog.... after months of frustration is this worth it?
Love your machine! I have a black beauty the same! fully stock! just looked at the monkey wrench! 5 GRAND ! I have to work 2 months to get it! did your parents buy that for you!?
The ICU engine management and then a tune a better clutch and mine is sequential that wouldn't last two minutes but I would love to have it sequential that holds! or nah a clutch would be way better!
Depends how much you upgrade the internals, and how much RPM you can crank out before the engine starts to shake from secondary imbalance at high rpm and high pressures
hakosan is it 217 at the wheels or crank? What injectors did you have. Eh I have a Celica with the gt2860rs turbokit. Nice to see an other 1zz turbo 👍🏻
Don’t mind that moron. Chances are he couldn’t handle a stock MR-S let alone 400hp. Tired of these types of douchebags that have to rain BS on other people’s properly done builds. They’re everywhere on RUclips and forums spreading BS.
Ummm dude its called crank hp. The car makes 138 hp at the crank stock. So at the wheels its less because drive loss. 100 hp to the wheels. So that 217 hp to the wheels is like 257 hp at the crank !
Boosted MR 2s are always nice having it turbo sweet clean sound of it..
Thanks bro!
Brooo, you're making me appreciate the MR2s so much every time I watch another of your videos. So stoked for you and hope you enjoy the new new lol Can't wait for the wheels, too!!
These new wheels are gonna be so awesome! Thanks for watching!
jeez u never see this type of cars driving around everyday but seeing u having a boosted MR2 is really amazing
Thanks bro!
@@hakosan86 and how clean it is for its age is wild
You look so young! I think it's amazing that someone of your age is so committed and talented. Keep up the amazing work.
Thank you so much!
Young man you have your priorities in the right place. Hair will grow back but boost is forever ( or until the engine blows)
This is dope, I'm happy for you bro Congratulations on your turbo build becoming a success & smooth tune ‼️🔰💯
Thanks so much bro!
Turbo suits these way better than a 2ZZ if your 1ZZ isn't fucked. I have an original TTE Turbo which was about 195bhp. Takes my friends 2ZZ conversion to school . Besides the bhp it makes about 50-60lbs more torque .
Yeah I absolutely love the turbo bro it’s so much fun!
Love those little MRS they are awesome even better if you put a Turbo in them yeah Keep that boost low don’t want it to blow man my Mazdaspeed protege blew up at 13 psi now is built but I would love to get my hands on one of those Good Job bro Take Care of it and stay Safe
My guy this is so awesome. Makes me wanna turbo my car too 😳
Do it bro! It’s so much more fun now!
Question, why did you have the fan blowing INTO the radiator? you need to extract the heat, not force it back in! Yes, it sounds stupid, but this is a rear engine car. The radiator fan pushes the air outwards towards the rear! fan should have been placed in one of the side gills that channels air to the fan shroud. Love the project either way, good job!
Thanks! I didn’t set car up on the dyno and i don’t want to tell the tuner what to do because I don’t think that would end well so I thought it would be fine if he just did his thing
@@hakosan86 Yeah telling a professional what to do is awkward lol, i get it.
Getting one of these soon, after I've done a manual conversion will be putting a super quick spooling gt2554r on the 1zz. Looking forward to it.
Nice man!!!
Are you running a boost controller? And if so what kind? I have the 1zz turbo kit from monkey wrench. I have the apexi fc, bigger injectors and stage 1 exedy clutch. Going to boost my 2001 Celica GT. I have the greddy profec boost controller but wanted to ask what kind of boost controller you are running if you are?
So around 217WHP @ 7psi? I'm guessing that's the Monkeywrench kit with the log style manifold and 2.5" pipes? How many miles on your motor and is it stock? I've been eyeballing this kit and the other one with the tubular manifold, V band clamps and 3" pipes. Hope your clutch is upgraded too. Looking good. Take care of it.
Yep monkey wrench! Stock motor and 108k miles
Is that motor still running (3 years later)? Guzzling oil? Trying to figure if I want to go the 1zz turbo route of go with the 2zz all motor.
Still going strong!
Sounds like a beast bro good job 🔥🔥
Thanks bro I’m really enjoying it!
Now this is good content. Turn up the boost!
Haha I don’t wanna blow my engine😂
Are dumb if he turn about 15psi he can say goodbye to his engine
@@littlekencil7233 Clearly you can't take a joke dude. He even says in the video he shouldn't turn it up, lol.
@Oscar Wilde yep i did that on my s14 and he is dead now
Yo nice car, where did you get your turbo from? link?
MWR, thanks!
Helpful video bro , still trying to decide if I boost my 1zz or swap the engine .
Boost!!!
Swap and boost
Swap 1.8 ain't shit ..
You can have a built and boosted 1zz for less than a stock swapped 2zz with a turbo.
Damn tahts some good numbers
I know right! I wasn’t expecting it!
hey bro fellow MR-S owner here, I really want to turbocharge my factory 1zz (among other things) but I know just by looking at it my engine isn't in a good enough state to handle it, do you know any websites where I can find parts to rebuild the motor? thanks
Monkey wrench racing should have all the parts you need to rebuild
Sick car bro. Plan on doing this to mine!
You still on the 195/45R16 tires? How has your traction been on those with the turbo?
Great!
Bro that was a good looking mr2 planing to install turbo on my mr2 as well
What ecu did you use? looking to do the same sorta build but to a matrix xr lol
How much did the tune cost? I am considering putting a MWR kit on my MR2.
Only 300!
@@hakosan86 Dang, I might need to make the drive to Austin for that!
Dude do it! He’s really good!
Nice
Thanks!
wow bro..your car came a long way🔥😍 keep it up man💪🙌
Thank you!
Wish this was 2zz boosted. Hope you go down that route
you start a project like this you might as well as rebuild the 2zz with beefier internals then get a turbo kit plus ecu + tuning it and work out like 100 kinks then you might as well invest in a stage 2 or 3 clutch kit ect easily spending 15k on parts + find someone to do the labor installing it and/ find the time to do it yourself and then after all that if you live in california hope it passes smog.... after months of frustration is this worth it?
How has it been long term? I have been thinking of boosting my matrix
Its great i just run 10w40 and replace it every 1.5k miles
2 yrs later and still going ??
@@hakosan86
Wtf, you change your oil every 1.5k miles?! Why???
Wait so you were able to tune on a stock ECU? Cuz I wanna tune my celica but people have been telling that it can’t be tuned
No i got an apexi power fc
@@hakosan86 oh cool. How much did you pay, cuz I’m seeing crazy prices
Where did you get your headlights?
Ive got a video on it!
ruclips.net/video/VFfBUJkYhOM/видео.html
Sounds bad ass this motivate me to get one!! That I’ve found in Red with low miles
If you haven’t already, join the mr2 spyder group on Facebook! A lot of people list there’s for sale there.
How's reliability been up to now bro I want too get my 1zz boosted
Been awesome! Nothing gone wrong so far!
@@hakosan86 good to hear thanks for your reply
Hey, can we get more content on the 1zz turbo , I honestly want to see the reliability and some tips on getting the turbo :) thanks
How much did it cost to turbo charge your 1zz man I love this car bro
Around 6k
@@hakosan86 that's awesome man I just subscribed to your channel I also got a white 1zz👍
Go crazy brother 🔥
Do you still have the MR2?
Yep
Ooooooo it looks soo good (in my opinion your stock wheels looks better than your black wheels)
Same bro lol I don’t even know why I bought the black ones😂
Love your machine! I have a black beauty the same! fully stock! just looked at the monkey wrench! 5 GRAND ! I have to work 2 months to get it! did your parents buy that for you!?
No lol everything that’s on my car I worked for
That kit also doesn’t have everything you need, add an 2k to that for you to have a full kit
The ICU engine management and then a tune a better clutch and mine is sequential that wouldn't last two minutes but I would love to have it sequential that holds! or nah a clutch would be way better!
ahh sorry You look so young! nice car ! take it to the track! that would be so quick!
Yeah mine used to be sequential too! You also gotta buy fuel injectors too. I’ll take it to the track when I get a couple more things!
Do you happen to know whats the max power the 1zz motor can hold with a turbo ?
Depends how much you upgrade the internals, and how much RPM you can crank out before the engine starts to shake from secondary imbalance at high rpm and high pressures
HAHAHAHAHAHA@@LMBLNCR
Is it aggressive when you turbocharged it?
Yep! Doubles the horsepower!
How much boost were you running in the end?
7 psi
stock internals?
Yepper!
Bro thanks for responding on a 4 year old vid 😂@@hakosan86
@@samkantorovich7635 no problem!
@@hakosan86 did you need a boost controller? and did you have upgraded clutch or injectors?
Thanks Mami that she got money and bought all that.
You don’t gotta tell me what u tell ur mom dude.
That’s a nice sleeper
Yep it’s a fun car!
Which turbo kit are you using?
The mwr turbo kit with the gt28
Where is this place. I like to take my mr2 there to get it tune
Where are you located?
@@hakosan86 Missouri
Oh I’m in Texas I don’t think your down for the drive just for a tune haha
@@hakosan86 where in Texas
Austin
did u change the forged piston & conrod ?
Nope
@@hakosan86 it still running healthy now ?
How many psi of boost ?
Yep and 9psi
What exhaust?
It’s a custom one from monkey wrench racing but it has a magnflow muffler
How much did the tune cost for this?
Think it was 300
Great channel
Thanks so much!
Can't wait to boost mine.
It’s a good feeling!
That’s on stock internals right?
Yep!
yo I got a gray MR2 what boost kit you use
Monkey wrench racing 1zz turbo kit
Beautiful car💣🔥🔫
Thanks bro!
just dont rev the 1zz like crazy its gonna be ok, that 90+mm stroke travel doesnt like that
I would never lol I don’t got enough money for a new engine lol
Worth it?
Yep!
The exhaust sounds beauty but 217 ain't that much you need to build that engine and get at least 400 whp from that baby
I’m fine with 220 for now man, maybe I’m the future I’ll put a 2zz in or a built 1zz but for right now it’s perfect
hakosan is it 217 at the wheels or crank?
What injectors did you have. Eh I have a Celica with the gt2860rs turbokit. Nice to see an other 1zz turbo 👍🏻
Don’t mind that moron. Chances are he couldn’t handle a stock MR-S let alone 400hp. Tired of these types of douchebags that have to rain BS on other people’s properly done builds. They’re everywhere on RUclips and forums spreading BS.
@YoSoyD PfknR 217hp in that light chassis is perfect for street and light track duties.
Do Daily Videos School Is Over !!!!
I don’t got enough parts for daily vlogs😂
I wish I did tho
What mufler does it have?
Magnaflow muffler
But the rest of it is custom!
Ummm dude its called crank hp. The car makes 138 hp at the crank stock. So at the wheels its less because drive loss. 100 hp to the wheels. So that 217 hp to the wheels is like 257 hp at the crank !
what kind of car is that
Toyota mrs
Grüße aus Deutschland 😁👍
How much you paid for turbo
6k for everything
God damn
I'm looking at getting an sw20 with the turbo... I'd love a t-top car but i don't think I'll get one.
0-100km how much?
0-60 mph is like 4.3 sec
@@hakosan86 very fast for 1zz how much psi you work it?
9
hm was the build
Nice! Build the motor!!!
Once I get 6 more grand lol
So you brought the car to Dyno with flat tires and no gas... 🙄
Крези👍🏻
I’m buying one tomorrow you want to help me turbo it? 😂
If ur close!
Uh, Kansas 😂😂
Yoooo fcken pinballz was the shit
Haha yeah bro I remember that day
U a pinoy?
Yep🇵🇭
Better watch the oil in that thing. Ask me how I know.
I’ve heard a couple people lose oil lol. I bought an oil pressure gauge and I always look at it just in case now
SAME ENGINE AS MY COROILLA
Yep!!!
We need legit incar pulls..
Soon bro!
Siiiiico
Nice