What is this a professionally produced videography set look at the background focus of the flowers in contrast to the drill and his arm just phenomenal shooting
i bought my sellf this model was shoked how good it is for 12v tool befor that i had 10yo black and decker 1ah it works fine but i wanted to get replace it and the hammer drill with one tool totally win for me
2:32 the lovely sound of a ratcheting chuck, that my flexiclick doesn't have btw 😭. Might be switching to the dcd703 if I can convince the wife lol wish me luck
Czy wkrętarką z udarem będzie możliwość odkręcania śrub samochodowych? Czy jest sens kupować wkrętarkę z udarem wyłącznie do takich rzeczy, bo potrzebuję po prostu wkrętarkę do prac monterskich, a udar ewentualnie do spraw samochodowych.
@@rookiexreviews For screwing he was using a diferent piece of wood, he even slanted the longest screw so as to not get over the wood thickness. He can also use stacked boards. And the last board he drilled look like 40mm, 1,5784".
@@nascidoem7938 508 inch pounds 👍I made a table with all the conversions for the drills sold at Lowe's and I pass them out to serious in depth customers lol
@@deanslegos1990 Bem, eu quis ser bondoso ao informar aquilo que coloquei no comentário, como não falo inglês tenho certa dificuldade, mas pelo visto pareço ter perdido meu tempo.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
18mm speedbore in 2nd gear wow Dewalt rocks .
What is this a professionally produced videography set look at the background focus of the flowers in contrast to the drill and his arm just phenomenal shooting
Just now ordered one of these little Beauties to go with my 3/8 impact & 1/4 driver.
i bought my sellf this model was shoked how good it is for 12v tool
befor that i had 10yo black and decker 1ah it works fine but i wanted to get replace it and the hammer drill with one tool
totally win for me
Excellent demo
2:32 the lovely sound of a ratcheting chuck, that my flexiclick doesn't have btw 😭. Might be switching to the dcd703 if I can convince the wife lol wish me luck
Same here
Super potente ese mini taladro con fuerza de gigante
Nice vid! Which battery are you using?
DeWalt XR 12V 2.0Ah
Hola que modelo de guantes son esos de dewalt??
I don't know what product code they have, you can search for them on Google "DeWalt 3-Finger Framer"
Czy wkrętarką z udarem będzie możliwość odkręcania śrub samochodowych? Czy jest sens kupować wkrętarkę z udarem wyłącznie do takich rzeczy, bo potrzebuję po prostu wkrętarkę do prac monterskich, a udar ewentualnie do spraw samochodowych.
you can use a 1/4-1/2 adapter but you might force the Hex 1/4 grip.
hi .. u only used one battery in all the video ? if that was the case.. do you remember how much battery you have left?
I used only one battery but I can't remember how much power was left
@@ToolTest ok , gracias por la respuesta .. buen video
Is it advisable to put higher amps volts in this tool such as 4.0amps 20V?
You can use batteries with a higher amperage, such as 5Ah, but you cannot use batteries with a voltage higher than 12V
@@ToolTest thanks
How come it doesnt make a beep sound when it senses resistance like other drills ive seen used?
beep sound?
@aortunoj it’s because it has an e clutch not a mechanical one
Where did you get your gloves?
It was a gift from a local store
Super
Is that a 1x1
lol I was jk then at 2:30 I seen it really was
@@rookiexreviews For screwing he was using a diferent piece of wood, he even slanted the longest screw so as to not get over the wood thickness. He can also use stacked boards. And the last board he drilled look like 40mm, 1,5784".
DeWalt or Makita and why. Thank you.
Ferrari or Lamborghini, something like that :D
@@ToolTest Lamborghini 😃
Makita because it's built better and will last the longest.
@@clarkfos3447 today i bought makita :)
@@clarkfos3447 I run both, no complaints about either.
Idk what video I found this out in but dewalt has torque specs on their European website. No more uwo nonsense for me
Hey, buddy. The torque at speed 2 is about 20 meters from Newton and at speed 2 absurd 57.5 meters newton. I hope I helped.
@@nascidoem7938 508 inch pounds 👍I made a table with all the conversions for the drills sold at Lowe's and I pass them out to serious in depth customers lol
@@deanslegos1990 Bem, eu quis ser bondoso ao informar aquilo que coloquei no comentário, como não falo inglês tenho certa dificuldade, mas pelo visto pareço ter perdido meu tempo.
🔥🔥🔥
Would be interesting to mention what wood it is. Density varies between different woods. This is a big factor.
For demonstrations, I use soft construction wood from coniferous trees. Moreover, it is also very easy to recognize.
@@ToolTest yes I thought too but not sure, thank you for your reaction and demo
👍👍👍
This Drill ! Use screwdriver dcs601
What is dcs601?
Bought this with 2 batteries charger and bag for 79 bucks hell of deal
From where?
It's listed at 199 everywhere.
softwood...! 😅
So you build with Waddywood? Pointless comments.